Flow: 0.2, 0.4 l/min
Pressure: 40 MPa
Power: 0.75 kW
... development of new technologies and new products. SOATOER Double Line Electric Lubrication Pump Fuel tank volume 30-60-100KG Applicable grease≤NLGI2 With high and low liquid level detection ...
Flow: 0.00013 m³/min
Pressure: 250 bar
Power: 0.55 kW
... three-phase motor, providing a wealth of flow and pressure characteristics that can even be used in medium to large systems. In particular, when equipped with a two-line reversing valve, ...
Flow: 120 l/min - 360 l/min
Pressure: 241 bar
Lubrication pumps for heavy duty mining trucks, hydraulically driven, available for single line lubricators, progressive systems, dual line systems, etc. HANDY-H is a hydraulically driven high ...
Flow: 60 l/min - 570 l/min
Pressure: 8 bar
Head: 0 m - 80 m
... showed that a large amount of energy required in a pump was to overcome the resistance in the pump. Another major issue was the mid-port scenario when Air pumps were ...
... to the unit. The pump stations are based on the standard Tapflo pumps from machined polyethylene (PE). An external pressure booster doubles the delivery pressure. ...
Flow: 34 l/h - 336 l/h
Pressure: 238 bar
Weight: 15 kg - 38.2 kg
... catalyst in a reactor for a refinery or high volume batch dosage treatments offshore such as biocides for water and fuel treatments. The “W” Series pump can deliver up to 90 gph (336 liters per hour at ...
Pressure: 10 bar
Fluid temperature: 60 °C
Weight: 600, 720 g
... Modern and compact oil burners pump, designed to pump fuel from the tank to the burner nozzle, at the required pressure. The A – AD type pump is made ...
Flow: 1 m³/h - 25 m³/h
Head: 9 m - 120 m
Power: 0.75 kW - 7.5 kW
... stainless steel (with adaptation of sealing materials on request). A universal pump for civil and industrial use, for pressureboosting systems, fire-extinguishing systems, high-pressure washing plants, ...
Calpeda
Flow: 3,700 us gal/h - 3,800 us gal/h
... Centrifugal Pumps End Suction Centrifugal Pump The Xylem Rule General Pupose Pump is designed 1-1/2" (38mm) inlet and 1-1/2" (38mm) discharge outlet. The Xylem Rule General Purpose Pump ...
Flow: 0 l/min - 0.04 l/min
Pressure: 0 bar - 400 bar
Power: 120 W
... actual flow rate is controlled and monitored. A built-in pressure sensor can be used for pressure monitoring. Pressure control with this built-in sensor is available ...
Flow: 450 m³/h
Pressure: 63 bar
Head: 630 m
... that the pump closely match the required duty conditions. Applications: Pumps of the SIHImulti range meet the specific requirements of many applications, such as waterworks and water supply, boiler ...
Flowserve SIHI Pumps
Flow: 250 m³/h
Pressure: 100 bar
Head: 1,000 m
... SIHImulti MSC range of horizontal, ring-section multi-stage pumps have been designed for long-term reliability when pumping high pressure liquids. The design features within this range ...
Flowserve SIHI Pumps
Flow: 250 m³/h
Pressure: 160 bar
Head: 1,600 m
SIHImulti pumps of the series MSH are horizontal multistage centrifugal pumps of ring-section design, which meet the technical requirements of ISO 5199 / EN 25199. The type MSH is developed for the high ...
Flowserve SIHI Pumps
Pressure: 40 bar
Fluid temperature: -20 °C - 180 °C
Screw pumps for industrial use series SSP (low pressure) and HSSP (high pressure) Service For all pumps Universal Hydraulik guarantee maintenance and repair.
The propellant pump is especially suitable for bringing liquified propellants with a low boiling point to a high pressure. The pump guarantees a constant propellant pressure ...
Application The TP pump is a pneumatically operated, single acting, piston pump. Discharge capacity is adjustable from 0.57cc to 1.1 cc per stroke. A high pressure ...
Flow: 48.1 l/min - 71 l/min
Pressure: 0 bar - 20 bar
Power: 0.4 kW - 2.5 kW
The 3-diaphragms pump ZETA 70 produces a flow of 71 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic ...
UDOR S.p.A.
Flow: 57.3 l/min - 85 l/min
Pressure: 0 bar - 20 bar
Power: 0.5 kW - 3.1 kW
The 3-diaphragms pump ZETA 85 produces a flow of 85 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic ...
UDOR S.p.A.
Flow: 81.9 l/min - 135 l/min
Pressure: 0 bar - 20 bar
Power: 0.6 W - 4.2 W
The 3-diaphragms pump ZETA 120 produces a flow of 116 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic ...
UDOR S.p.A.
Flow: 0 l/h - 840 l/h
Pressure: 0.6, 0.55 MPa
Power: 10 W - 150 W
... manufactured of SUS316, PTFE, PPS and PEEK. These material combinations offer extremely high levels of corrosion resistance. Thus the transfer of many different agressive chemical solutions is assured. High ...
IWAKI Europe GmbH
Flow: 0 l/h - 5.4 l/h
Pressure: 0.2 MPa
Fluid temperature: 0 °C - 60 °C
High precision micro dosing All main parts (piston & cylinder) are made of finest ceramic produced with high precision and micro tolerances. Therefore a repeatability ...
IWAKI Europe GmbH
Flow: 14, 16, 17, 20 l/min
Pressure: 0 Pa - 350,000 Pa
Power: 180 W - 220 W
... turbine pumps With the MDT series mag. drive turbine pumps made of plastic are available. Discharge pressures up to 0.35 MPa are attainable. Thanks to the seal less construction, leackage ...
IWAKI Europe GmbH
Flow: 4 m³/h - 20 m³/h
Pressure: 7, 15 bar
... Double-Diaphragm (AODD) Pumps have been specially designed to provide a safe operation in high-pressure applications up to 15 bar (218 psig). A typical application of these pumps is filter ...
Flow: 0 l/min - 650 l/min
Pressure: 0 bar - 100 bar
Fluid temperature: 0 °C - 60 °C
High pressure pumps High pressure spindle pumps. Solution for deep boreholes and the high pressure ...
Flow: 0.21 m³/h - 67.69 m³/h
Pressure: 39 bar - 1,146 bar
Power: 2.2 kW - 110 kW
3C Triplex Pumps Series Process pumps for high-pressure duties A flexible, robust and reliable solution to pumping high temperature, abrasive and viscous liquids in ...
Flow: 98 us gal/min
Pressure: 0 psi - 57 psi
WH15 (WH15XK1C1 ) FEATURES High pressure 1.5" centrifugal pump Easy starting Honda OHV commercial engine 115 gal./min. capacity 55 psi max. Cast iron volute and impeller
Flow: 119 us gal/min
Pressure: 0 psi - 64 psi
WH20 (WH20XK1AC1 ) FEATURES High pressure 2" pump Easy starting Honda OHV commercial engine 134 gal./min capacity 61 psi max. Cast iron volute and impeller MSRP
Flow: 76 l/min
Pressure: 40 bar
Power: 7.3 ch
Semi-hydraulic three-diaphragm pump, for use on sprayers for high pressure pesticide spraying in orchards and vineyards. Parts in contact with pumped liquids in anodized aluminium, and ...
Annovi Reverberi
Flow: 0 m³/h - 80 m³/h
Pressure: 0 bar - 28 bar
The Fristam Centrifugal pumps FM enable effortless pumping at high pressures. They are designed to suit higher pressure loads. Technical briefs: The pumps ...
... variety of spraying jobs. Pressure and output are designed for optimum performance of medium to large-sized sprayers. Hypro high pressure diaphragm pumps are supplied ...
Hypro Pressure Cleaning
The Series 5200 "Big Twin" piston pump from Pentair Hypro is suitable for applications in high pressure washers for industrial and agricultural cleaning needs. It is also useful as a ...
Hypro Pressure Cleaning
The Pentair Hypro Series 5200 Big Twin piston pump is suitable for applications in high pressure washers for industrial and agricultural cleaning needs. It is also useful as a sprayer ...
Hypro Pressure Cleaning
Flow: 0 us gal/min - 44,000 us gal/min
Pressure: 0 bar - 400 bar
Head: 0'00" ft - 1800'00"
... of Wet Stator Motor Pumps (BCP / BWCP) Vertical pump with an integrated wet wound motor. The pump and motor are designed for the same internal pressure, so there is ...
Flow: 600 m³/h
Pressure: 6,000 psi
Head: 160 m
High Pressure, High Temperature Pump A canned motor pump with a high-temperature and high-pressure ...
Flow: 274 l/min - 423 l/min
Pressure: 360, 260, 300, 400, 330 bar
Power: 0 kW - 200 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Flow: 0 us gal/min - 8,000 us gal/min
Head: 0 m - 256 m
Hybrid Pumps Cornell Pump hybrid pumps are able to handle dirty water and viscous slurries. They can handle small solids and high operating pressures ...
Pressure: 700 bar
... Ergonomic – Easy grip pump lever and relief knob. • High Speed – The pumps have 2-step function that automatically switches between high ...
Pressure: 1,000, 1,500, 2,800 bar
... between high speed and high pressure. • Built-in relief valve prevents excessive pressure. NOTE! Always use tools designed for the hydraulic pressure ...
Pressure: 700 bar
... -3 liters. • Integrated relief valve prevents the pumps provide high pressure. • The pumps are durable and designed for daily use.
Flow: 1.66 l/s
Power: 1.1 kW
FEATURES High pressure Magnetic pumps can be used with chemically aggressive liquids Best resistance to working conditions Significant improvement in safety and durability Robust structure. Continuous ...
Please specify:
Help us improve:
remaining