DN: 10 mm - 100 mm
Pressure: 100, 16, 40 bar
Temperature: 0 °C - 220 °C
... body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as ...
VALSTEAM ADCA Engineering S.A.
DN: 10 mm - 100 mm
Pressure: 40, 16, 100 bar
Temperature: 0 °C - 220 °C
... body ball valves are isolating valves designed for use with clean steam, condensate and other gases and liquids used in high purity and aseptic processes. The valve is not designed as ...
VALSTEAM ADCA Engineering S.A.
DN: 8 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 150 °C
... diaphragm sensing, pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve ...
VALSTEAM ADCA Engineering S.A.
Pressure: 250 bar
CAV-250 Stand-alone high pressure valves for all type of paint types. CVM-250 is a colour valve module to be used for external paint or material supply to an applicator of any type. Can be built in ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
DN: 0.5 in - 3 in
The internal thread gate valve, also known as the gate valve, is the most widely used valve and belongs to the mandatory sealing valve. medium flow.
ChinaTanggong Valve Co., Ltd.
DN: 3.96 in
Temperature: 35, 40 °F
... locomotive freeze protection valve in the world. This self-operating valve is designed to monitor the water temperature of the engine’s water-cooling system and automatically snap open to drain it if ...
DN: 3.88 in
... standard GURU® Plug. This thermostatic drain valve responds to the engine coolant temperature and will pop open to rapidly drain the system before freeze damage can occur when the coolant reaches the valve’s ...
Temperature: 35, 40 °F
The GURU® Valve DL2.1 CH and CHS Plugs are self-operating drain valves that are easily retrofitted into water-cooled air compressor heads to protect the compressors from freeze damage when a locomotive ...
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
- Manually operated 2-way ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... adjustment M&C RV 11-… needle valves, this is possible in a reliable and exact manner thanks to the optimum design of the valve control system. The use of corrosion-resistant materials also ensures analytical ...
DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C
Plastic lined butterfly valves SBP are available in either wafer or lug style for on/off, throttling or control applications for liquid, powdery media or gaseous service. Main features • Large selection of different ...
DN: 10 mm - 50 mm
Pressure: 63 psi
Temperature: -328 °F - 392 °F
... to-196°C. The shut-off valves are approved according to DIN EN 1626. The series is available in the nominal widths DN10 - DN50 and can be designed with connection options for welding ends and welding sockets. The manual ...
Goetze KG Armaturen
Pressure: 10 bar
Temperature: -5 °C - 70 °C
Should a sudden pressure failure happen. if the stop valves are assembled in pairs on the cylinder. the stop valves make sure, that the cylinder piston rapidily stops. By operating the override device, ...
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 60 °C
Dueker gate valves – for water and gas.Reliable, safe and cost-effective. Dueker gate valves are used to great effect all over the world. There is a good reason for this – valves have ...
Düker GmbH
DN: 6 in - 8 in
Pressure: 300, 750 psi
Temperature: -46 °C - 240 °C
Trunnion ball | Soft seated | Full bore | Bidirectional Fire safe design | Antistatic design Live loaded stem packing Double encapsulated body sealing ISO 5211 top works for automation Anti blowout stem Self relieving seats Optional ...
DN: 50 mm - 1,200 mm
Pressure: 3 bar - 10 bar
Temperature: -30 °C - 200 °C
• Available in sizes ranging from DN50 to DN600 with either Wafer or Lug body configurations. • Ideally suited to be used in lines containing fibrous particles and liquids with suspended solids. • Main Application Areas are Pulp&Paper ...
Doruk Endustri Ltd.
USED FOR 1-2KG FIRE EXTINGUISHER
Ningbo Anke Fire Fighting Equipment Company
THROTTLE VALVE WITH FREE FLOW IN ONE DIRECTION DESCRIPTION The QTM7 valve is a one-way flow control valve with built-in non-return valve for reverse free flow, in ...
DN: 63 mm - 225 mm
Pressure: 1, 4 bar
Temperature: -10 °C - 70 °C
SINGLE-PLATE GATE VALVE TYPE PSA-ELI SIL-PE Being part of the proven KÜHME shut-off valves for gas supply lines, the gate valve type PSA-ELI SIL-PE can be used in every application ...
Kühme Armaturen GmbH
DN: 63 mm - 225 mm
Pressure: 1, 4 bar
Temperature: -10 °C - 70 °C
SINGLE-PLATE GATE VALVE TYPE PSA-ELI BLO-PE Being part of the proven KÜHME shut-off valves for gas supply pipelines, the gate valve type PSA-ELI BLO-PE with two blow-out units with ...
Kühme Armaturen GmbH
DN: 50 mm - 400 mm
Pressure: 6, 25 bar
Temperature: 200 °C
2D MIXING VALVES – TYPE ZDM Fully automated mixing valve for a selective gas quality control with simultaneous control of the flow rate. The application area of the ZDM mixing valve ...
Kühme Armaturen GmbH
DN: 10 mm - 50 mm
Pressure: 16 bar
Armaturen Arndt
DN: 0.25 in - 0.5 in
Pressure: 6, 16 bar
manometer gauge cock, light design, female thread x female thread, material: brass
Armaturen Arndt
DN: 0.5 in
Pressure: 250, 400 bar
Temperature: 120, 200 °C
manometer gauge valve, DIN 16271, male thread x sleeve x test connector M20 x 1,5
Armaturen Arndt
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
ECONEX Manual Reset Shut-Off valves Normally Closed of the series MRVA are equipped with a new-concept powerful solenoid capable of functioning at high operating pressures and flow capacities than most ...
ECONEX S.R.L.
DN: 15 mm - 100 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 225 °C
... flange DIN EN ISO 5211 full bore INTEC K400 - Multiple way ball valves Multiple way ball valve of the modular INTEC system technology! The universal multiple way ball valve ...
KLINGER-SCHÖNEBERG GmbH
DN: 15 mm - 100 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 225 °C
... flange DIN EN ISO 5211 full bore INTEC K400 - Multiple way ball valves Multiple way ball valve of the modular INTEC system technology! The universal multiple way ball valve ...
KLINGER-SCHÖNEBERG GmbH
DN: 50 mm - 200 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 225 °C
... flanges acc. to EN 1092 top flange DIN EN ISO 5211 full bore INTEC K500 - Tank bottom ball valves Tank bottom ball valve of the modular INTEC system technology! The stem is angularly ...
KLINGER-SCHÖNEBERG GmbH
Pressure: 12 bar - 50 bar
Temperature: 0 °C - 80 °C
This metering valve is developed by I.L.C. srl. It is being offered with manual, pneumatic as well as electrical actuations. In addition, the metering valve is meters out the lubricant ...
DN: 15, 8, 10 mm
Pressure: 8, 10, 6 bar
Temperature: -20 °C - 140 °C
The ball and shut-off valves are available in 2-way and 3-way configurations and in a wide variety of threaded connections – including push-in. The different flow capacities ensure a reliable solution to the specific ...
The NV62L Block & Bleed Valve is most commonly used in combination with a declutchable gear override. This Namur accessory mounts in-line with other components such as a Namur solenoid valve, directly ...
DN: 0.125 in - 0.75 in
Pressure: 0 psi - 145 psi
Temperature: -20 °C - 70 °C
1. The direction-change turns lightly with good hand feeling and exact orientation. 2. Large effective circulating area leads to little pressure loss. 3. Panel and body installation are optional. The panel installation ...
Airtac Automatic Industrial
DN: 0.25, 0.125, 0.43, 0.56 in
Pressure: 10,000, 6,000 psi
Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Hard seat valves ...
NOSHOK
Pressure: 29.4, 31.6, 35.7, 42.2, 49.6 bar
Temperature: 38, 100, 200, 300, 400 °C
... all stop valves and with test and drainage function. The TrapStation TS 36 encompasses the universal connector, two stop valves - which are accessibly positioned and clearly colour-coded to ensure easy ...
GESTRA AG
Please specify:
Help us improve:
remaining