Primary current: 0.5 A
Voltage: 30 V
Pitch: 0.8 mm
Designs are based on the industry standard SFP Multi-Source Agreement (MSA).The SFP board mount connector is 20 position and 0.8mm pitch.High Speed Contact Design.High temp and IR reflow compatible versions are available. ...
Nextronics Engineering Corp.
Voltage: 300 V
• Compliant with MSA standard. • Patent protected multi-piece composite structure. • Cage: Copper Alloy with Nickel Plating • Kick-out Spring: Stainless Steel • Elastomeric Gasket: Carbon / Nickel in silicone Electrical: • Contact ...
Nextronics Engineering Corp.
Operating temperature: -20 °C - 85 °C
Compliant with MSA standard. Lightpipe and heatsink options available. Press-fit and solder options available. Press-fit contact compliant with IEC60352.360°EMI shielded. Body Cage：Stainless Steel EMI Spring：Stainless Steel Heat ...
Nextronics Engineering Corp.
Primary current: 5.1, 1.7, 5.5 A
Pitch: 0.8 mm
Data rate: 16 Gb/s
Performance Level IEC 60512-9-1:2010 - 1 No. of Contacts - 12 Board-to-Board Distance - 6.0 mm to 13.5 mm Insulator Material - LCP, UL 94 V-0 CTI value IEC 60112 - 150 Contact Material - Copper alloy Plating - Au over Ni Termination ...
ept
... also called pogo connectors or simply short travel probes due to their compactness and their short travel. Pogo Connectors They are particularly suitable as charging contacts and as interfaces for ...
Primary current: 35 A - 1,500 A
Sockets 35-1500 A with thread connection Material: brass silver plated
Druseidt
Primary current: 35 A - 1,500 A
Plugs 35-1500 A with threat connection Material: brass silver plated
Druseidt
Primary current: 80 A - 300 A
Sockets 80-300 A with snap-in lock and crimp connection Material: brass, silver plated
Druseidt
... a number of connector kits to enable the construction of custom cabling. Kits are available for virtually all of OMS past and current products. Features: - Connector kit compatible with the PC48 family ...
... available or needed, OMS supplies a number of connector kits to enable the construction of custom cabling. Kits are available for virtually all of OMS past and current products. Features: The CON68 Connector ...
Primary current: 10 A
Voltage: 250 V
The C13 socket is often manufactured as a so-called IEC cable in conjunction with a country-specific power plug. These cables are used for the power supply of IT equipment such as monitors, computers, power supplies or printers. You will ...
Müller Plastik GmbH
with extra pull relief EN 60320 standard sheet C13 10A/250V~ 70°C
Müller Plastik GmbH
Primary current: 10 A
Voltage: 250 V
Müller Plastik GmbH
Fibre opticals made of glass or plastic are used to transport the light from the sensor to the target and back.Fibre opticals are especially suited for space-limited applications or for diffucult environmental conditions e.g. high temperature ...
Through connectors 0.25 - 6 mm² Data: Cu 99.95%, tin plated. Insulation sleeves are halogen free, no EasyEntry
Elpress
Through connectors with heat shrink insulation 0.5 - 6 mm² Data: Cu 99.95%, tin plated, heat shrink sleeve with melting glue inside
Elpress
Parallel connectors 0.5 - 6 mm² Data: Cu 99.95%, tin plated. Insulation sleeves are halogen free.
Elpress
... wear-free contacting connectors for in-circuit and functional tests. They have been specially developed for very numerous inspections as found frequently in the most different industries in the production process. ENGMATEC ...
Connector (4PIN DIN) mating part KPP-4P Net weight - 0,003 kg Connector - 4PIN DIN
... configuration, e.g. first side Mxx-connector - second side individually confectioned (e.g. cable gland mounted or cable support sleeve moulded, common crimp connectors confectioned) -Our family of ...
PHG
... producing device connectors for many years, also called flange bushings and flange connectors, above all in the series M12 and M16. Apart from standard connectors a multitude of customized ...
PHG
... Cables with overmoulded connectors -Individually attuned to your requirements -Customer-specific overall configuration of the cable assembly -Adjustable to your design requests -Plastic-moulded ...
PHG
Primary current: 4 A
Voltage: 10 V - 30 V
Straight in d.c. • Moulded with cable • According to EN 60947-5-2 • General Features: Female connectors of this section can be matched to the proximity sensors as indicated on the ordering references tables of the ...
BDC ELECTRONIC S.r.l.
Primary current: 4 A
Voltage: 10 V - 30 V
• Angled in d.c. • Moulded with cable • According to EN 60947-5-2 General Features: Female connectors of this section can be matched to the proximity sensors as indicated on the ordering references tables of the ...
BDC ELECTRONIC S.r.l.
Primary current: 4 A
Voltage: 0 V - 75 V
Straight in d.c. • Moulded with cable • According to EN 60947-5-2 • Technical data: • Operating voltage: max 50 Vac/75 Vdc • Maximum current: 4 A • Contact resistance: ≤ 5 mΩ • Contacts: CuZn, brass pre-nickeled and gold plated ...
BDC ELECTRONIC S.r.l.
Primary current: 4 A
Voltage: 250 V
... series of M12 double ended 3-pole circular connectors for axial code "A". It has a nominal current of 4A, a nominal voltage of 250V, a cable length of 0.3 m, and 3 poles. It has a temperature operation connector ...
MINTEC INDUSTRIALE
PROCON housings are made from die cast aluminium, die cast zinc and glass fibre-reinforced polyamide. A seawater-resistant special aluminium die cast alloy is used for the BHT series. The aluminium housing is given a high-quality powder ...
Primary current: 8 A
Voltage: 160 V
Pitch: 3.5 mm
Female plug-in connector - Side-by-side - Stackable version - - 02 ÷ 24 poles
Euroclamp
Primary current: 16 A
Voltage: 250 V
Pitch: 5.08 mm
Female plug-in connector - Modular version - 2÷3 poles
Euroclamp
Primary current: 8 A
Voltage: 500 V
Pitch: 7.62 mm
Female plug-in connector - Side-by-side - Stackable version - 02 ÷ 12 poles
Euroclamp
MTMA-GC series through connectors are made from aluminium of a purity equal to or greater than 99,5%. They feature a solid stop which creates a barrier between the two sides of conductors to be joined. Barrels are capped ...
CEMBRE
TNC-Male (plug) crimp connector, solder pin, no braid trim
Times Microwave Systems
Primary current: 30 A
Voltage: 10,000 V - 40,000 V
The high-voltage circular connector from the S series is manufactured by GES. It has an IP50 class protection, with a round or 4-hole flange mount. The connector operates with a voltage range of 10 up ...
GES Electronic & Service GmbH
Primary current: 20 A
Voltage: 8 V - 700 V
The Eclipse offers machined power contacts for world-class current density paired with a cost-effective formed signal contact cluster. Retain the performance without the cost implications.
Positronic Industries
Primary current: 3 A
Voltage: 33 V - 70 V
Female BNC Jack (socket) w/ Solder Terminal. Ideal for panel mounting, round nut fixing.
Ground strap adapter kit for SX series DIN connectors PolyPhaser DIN Ground Strap Kit Specifications for GSA-KIT-D Mount Type strap Ground Type copper
Primary current: 16 A
Voltage: 500 V
Brief description: CNZ complete connectors 16A max - 500V (screw), 6 poles, hoods with single lever, hoodhood side entry TECHNICAL DETAILS Product description SeriesCNZ complete connectors 16A max ...
ILME
With the hermaphroditic MicroStac connectors, the plug and mating plug are identical. The connectors are available in single-row and double-row variants. They offer economical solutions for connectors ...
ERNI Electronics
Pitch: 1 mm
Mezza-pede low profile 1.0mm pitch SMT Connectors from Advanced are designed for board-to-board or flex cable-to-board applications where long-term reliability is required. With Advanced's enclosed screw-machined socket, ...
Advanced Interconnections
... Prep tool for 1/2" cable connector The prep tool is special designed for the connector installation. It allows fast, exact connector installation and saves the preparation time. ...
Voltage: 1,500, 1,000 V
Operating temperature: -40 °C - 70 °C
Category 6 RJ45 connector, EA class with locking hook Made up of only 2 elements Extremely simple assembly: connection without special tools Die-cast zinc housing suitable for industrial applications Cat6 connector, ...
19” 3U horizontal resorber - For optical cross-connect Reversible resorber (cord input on right or left) Lifting capacity of up to 288 x 2 mm cords Optimal resorption and adjustment of cords, using cylinders and demi-cylinders Depth ...
Please specify:
Help us improve:
remaining