ITW spray nozzles
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Model 1103 Mini Super Air Nozzle The 1/8 NPT Mini Super Air Nozzle™ provides a forceful, concentrated stream of high velocity airflow. It has fewer holes than the larger Super Air Nozzles, ...
EXAIR
Orifice diameter: 0.25 in
Flow: 1.8 us gal/h - 6.9 us gal/h
Pressure: 0.4 bar - 4.8 bar
... right angle to the nozzle's orientation, allowing spray to be placed precisely where it's needed in close quarters. These nozzles are ideal for coating the inside of enclosures and ductwork. ...
EXAIR
Orifice diameter: 0.25 in
Flow: 6.9 us gal/min
Pressure: 0.7, 0.8, 0.4, 0.6 bar
... flat fan pattern nozzles are designed for use where space is at a premium. The flat fan pattern sprays at a right angle to the nozzle’s orientation, allowing spray to ...
EXAIR
... connect nozzles. Special tipped nozzles such as ruby and cermet are also available. NOZZLE SPRAY OPTIONS Flat fan spray Solid jet stream Hollow cone Full cone
Orifice diameter: 2 mm - 10 mm
Flow: 0.3 l/min - 222.7 l/min
Pressure: 0.5 bar - 10 bar
GA FLAT FAN NOZZLE – SHORT BODY The special short body design of the GA flat fan nozzle makes it possible to use nozzle spray pipes in such machines or systems where ...
PNR Italia
Orifice diameter: 0.28 mm - 12.5 mm
Flow: 0.32 l/min - 223 l/min
Pressure: 0.5 bar - 10 bar
GX FLAT FAN NOZZLE – LOW CAPACITY GX flat fan nozzle tips are usually mounted onto a pipe by means of a welded nipple or a clamp, and secured in place with a retaining nut. They can ...
PNR Italia
Orifice diameter: 0.38 in - 0.75 in
Flow: 0.78 l/min - 223 l/min
Pressure: 0.5 bar - 10 bar
... flat fan nozzle tips are usually mounted onto a pipe by means of a welding nipple and secured in place with a retaining nut. Therefore, they can be easily replaced and their dovetail connection assures ...
PNR Italia
Orifice diameter: 20 µm - 60 µm
Vortec Spray Nozzles provide ultra-fine droplet-sized sprays for evaporative cooling, atomization, humidification and wetting. Superior to conventional hydraulic and piezoelectric nozzles, ...
ITW Air Management
Orifice diameter: 20 µm - 200 µm
Vortec Spray Nozzles provide ultra-fine droplet-sized sprays for evaporative cooling, atomization, humidification and wetting. Superior to conventional hydraulic and piezoelectric nozzles, ...
ITW Air Management
Orifice diameter: 60 µm - 200 µm
Vortec Spray Nozzles provide ultra-fine droplet-sized sprays for evaporative cooling, atomization, humidification and wetting. Superior to conventional hydraulic and piezoelectric nozzles, ...
ITW Air Management
Orifice diameter: 0.25, 0.34, 0.13, 0.19 in
Pressure: 0 psi - 200 psi
Media temperature: 0 °C - 371 °C
... utilize unique vortices and flow passages to provide a finely atomized hollow cone spray pattern. When used with most normal fuels, Spin Jets produce a 70° cone angle spray with differential pressure ...
Orifice diameter: 0.05 mm - 0.41 mm
Pressure: 50 psi - 200 psi
Media temperature: 80 °F
Atomizing nozzles are available in both air-assisted and airless designs. They provide a specified spray pattern that can be used to assist in combustion in fuel systems or for applying a coating in medical ...
Orifice diameter: 0.07 mm
Pressure: 10 psi - 200 psi
Media temperature: 200 °F
Dispensing nozzles are designed for low volume dispensing, ranging from nanoliter droplets to precise dosing of milliliters at a time. These dispensing nozzles are available with orifice sizes as small ...
... Dual-Shaping Air Larger range of spray patterns Improved cleanliness Increased transfer efficiency Improved Production Uptime Dual Purge capabilities reduces color change time New fluid nozzle ...
CARLISLE FLUID TECHNOLOGIES
... atomizers focused on delivering improved spray pattern control, cleanliness of the applicator during operation, and longer lasting components. The applicator can be used electrostatically for solvent-borne spraying ...
CARLISLE FLUID TECHNOLOGIES
... mounted rotary atomizers focused on delivering improved spray pattern control, cleanliness of the applicator during operation, and longer lasting components. The applicator is designed to spray waterborne ...
CARLISLE FLUID TECHNOLOGIES
Orifice diameter: 0.15 mm - 0.6 mm
Flow: 0.14 l/min - 1.95 l/min
Pressure: 100 bar
Tip sizes to be defined depending on applications SF Airless Flat Tip SS Body The reference nozzle in the wood and Leather industries Robotic applications
EXITFLEX
Orifice diameter: 0.15 mm - 0.6 mm
Flow: 0.14 l/min - 1.95 l/min
Pressure: 100 bar
SF Airless Tip SS Body The reference nozzle in the wood industry Robotic applications, easy clean
EXITFLEX
Orifice diameter: 0.01 in - 0.06 in
Flow: 0.18 l/min - 13,700 l/min
Pressure: 350 bar
... Reversible/Switch Tips Designed to fit most manufacturers guards (exception, Graco RAC X) The quality of your work is only as good as the quality of your finish. Don't compromise on quality, choose the Exitflex, ...
EXITFLEX
Pressure: 3 bar
Flat Cone 60° Coaxial Nozzle for air/oil lubrication systems.
Dropsa spa
Single Pipe Nozzle for air/oil lubrication systems.
Dropsa spa
Coaxial Nozzle with head threaded and shape spray Threated coaxial nozzle with cone shape spray
Dropsa spa
Pressure: 3 bar - 6 bar
Media temperature: -25 °C - 80 °C
... bar. Think of tools, extruding plastics, lubricants, polishing, etc. The higher the pressure, the finer the spray mist and the smaller the spray angle. How it works: The fluid hose is either laid ...
Sommer-Technik
Pressure: 3 bar - 6 bar
Media temperature: -25 °C - 80 °C
... metal hose - For low and high viscosity fluids To atomize low and high viscosity fluids (max. viscosity 420 mm²/s). The spraying angle on this atomizer is 90° in reference to air and fluid connection. Operating pressure ...
Sommer-Technik
Pressure: 3 bar - 8 bar
Media temperature: -25 °C - 80 °C
... fixed a little above the maximum fluid level in the tank. With compressed air applied, the atomizer will instantly start to spray (a built-in check valve in the hose prevents the fluid level from dropping too fast). The ...
Sommer-Technik
Orifice diameter: 19 mm
Flow: 45 l/min
Pressure: 5 bar
AdBlue/DEF nozzles with stainless steel and thermoplastic versions available. Depending on the model they can be manual or automatic, with spike or thread connection.
Orifice diameter: 1 in
Flow: 25 l/min - 250 l/min
Pressure: 6 bar
... that any debris is flushed from the nozzle to avoid pattern disruptions or flow reductions. All the models include a pressure eliminator for ease of flow settings at different pressures. Stream Pattern: The nozzle ...
Spray nozzles Eductor nozzle Misting nozzles Washing - cleaning nozzles
... when coming into contact with the vibrating surface. The ultrasonic nozzle produces droplets or particles of mastered size: the higher the ultrasonic frequency, the smaller the aerosol particles (some ...
Orifice diameter: 0.2 mm - 1.6 mm
... two different spray distributions: uniform spray distribution throughout spray pattern area (when spraying at a low air-water ratio), or a mountain-shaped distribution ...
H. IKEUCHI & CO., LTD.
Lance Nozzle, good for complete evaporation in cooling tower, large volume is also effective for dust suppression. Features • Pneumatic spray nozzle producing fine atomization with ...
H. IKEUCHI & CO., LTD.
Orifice diameter: 0.2 mm - 5.8 mm
Standard Flat Spray Nozzles - One-piece Structure with Ceramic Tip Even Spray Distribution Features • Flat spray pattern with uniform distribution ...
H. IKEUCHI & CO., LTD.
WS single nozzle can accurately spray to the lubrication point position to achieve precise lubrication.
WD dual nozzles, the center distance of the dual nozzles is 7, 9, 11mm, whichWD dual nozzles, the center distance of the dual nozzles is 7, 9, 11mm, which can be accurately ...
60 ° concentric tube oil-gas nozzle is widely used in micro lubrication spray oil coating, such as oil coating on metal plate surface.
SPRAY CHARACTERISTICS Fine atomisation of many liquids that cannot be atomised by hydraulic pressure alone. Uniform solid cone. Spray angle varies with air pressure and flow. Separate metering ...
DELAVAN France
Spray Characteristics The Delavan AL air atomising series spray nozzles offer the user a wide variety of spray patterns, flow rates and atomisation. Unlike hydraulic ...
DELAVAN France
The AL 15 series is a pressure-fed external mix flat fan spray nozzle The external mix feature allows control of the atomization without changing liquid flow. The lighter the air pressure, the higher ...
DELAVAN France
Orifice diameter: 4, 8, 15 mm
The internationally patented Variacor® system enables you to assemble spraying systems quickly and easily as well as adjusting nozzle positions efficiently. Economy: You don't waste time calling ...
INDUSTRIAL SPRAY NOZZLES - FLAT SPRAY SPRAY CHARACTERISTICS Produces a uniform, flat spray pattern without hard edges at pressure of 0.5 bar and up. Tapered ...
DELAVAN SPRAY TECHNOLOGIES
INDUSTRIAL SPRAY NOZZLES - AIR ATOMISING FEATURES Fine atomisation in a wide range of flow rates Spray angle is wider than most external mix nozzles. Air Flow M³/Min ...
DELAVAN SPRAY TECHNOLOGIES
Delavan Carbide Tips are specifically designed and tested for all airless paint spraying applications. Design and manufacturing techniques used on the Delavan Airless Tips are based ...
DELAVAN SPRAY TECHNOLOGIES
Orifice diameter: 0.8 mm - 1.8 mm
5-orifice nozzles FL Five-orifice nozzle with horizontal spray formation. Advantages Black and gray nozzle sizes can be combined with dosing orifices Change in ...
Lechler
Orifice diameter: 0.4, 0.5 mm
Particularly fine flat fan atomization with air or gas. Pressure principle. Internal mixing of fluids. Applications: Web dampening, cooling, humidification of goods.
Lechler
Orifice diameter: 1 mm - 8 mm
Air-Injector flat spray nozzles ID3 Extremely low-drift, air-injector flat spray nozzle for professional use.
Lechler
Nozzle ball adjustable DPL model The nozzle ball adjustable is easily mountable on the clamps ZPL series and through NPL locking ring. Available with a wide range of flow rates ranging from 3.9 to ...
EUSPRAY BY EUROSPRAY SPRAY AND FILTER TECHNOLOGY
All flat tips series “Airless” integrate high quality tungsten carbide inserts, which provide maximum resistance to abrasion and uniform distribution. We suggest to check usually the tips and replace ...
EUSPRAY BY EUROSPRAY SPRAY AND FILTER TECHNOLOGY
EUSPRAY BY EUROSPRAY SPRAY AND FILTER TECHNOLOGY
Orifice diameter: 4 mm - 8 mm
Thread Mount Type The Coolant Spray Nozzle could easily adjust its direction and spray precisely. BA90102020001A Thread Mount: PT 1/8 L: 20 L1: 10 D1: 6 D2: 5 d: 4 H: 17 BA90102020002A Thread ...
Orifice diameter: 3 mm - 4.4 mm
The Coolant Spray Nozzle could easily adjust its direction and spray precisely. When the coolants correspond with three pressures-low, medium and high pressures, it can precisely aim ...
Leak Lock Type (Alloy Steel) Special design for avoiding oil leaking. Not delaying spraying fluid which prolongs the longevity of the tool holders. SPECIFICATIONS BA90104020001A Thread Mount: PT 1/8 L: 40 L1: ...
Pressure: 0 bar - 10 bar
Media temperature: 0 °C - 400 °C
... dimensions for the nozzle can fit on most machine designs. Technical data Replace open pipe Ø (inch) - 5/64 Blowing force - 3.2 oz Air consumption (scfm) - 2.4 Sound level (dB(A)) - 76 Nozzle ...
Pressure: 0 bar - 10 bar
Media temperature: 0 °C - 260 °C
... Replace open pipe Ø (mm) - 4 Blowing force (N) - 2.7 Air consumption (Nm³/h) - 15 Sound level (dB(A)) - 80 Nozzle technology - Hole Material (nozzle) - PEEK Connection - G 1/8" Connection type ...
As an alternative to BL industrial atomisers with pump and control unit, Mantis also offers hand-held spraying units, which are ideal for flexible use on smaller surfaces and are extremely portable. Since 2014, it ...
Mantis ULV
As an alternative to BL industrial atomisers with pump and control unit, Mantis also offers hand-held spraying units, which are ideal for flexible use on smaller surfaces and are extremely portable. Since 2014, it ...
Mantis ULV
As an alternative to BL industrial atomisers with pump and control unit, Mantis also offers hand-held spraying units, which are ideal for flexible use on smaller surfaces and are extremely portable. Since 2014, it ...
Mantis ULV
Media temperature: 450, 350, 320 °C
Heating nozzles for injection machines and molds, hot melt application, similar spray gun, especially in cases where they are available for mounting in limited areas DESCRIPTION: • Power dissipation: ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining