Iwaki metal pumps

Flow: 90 l/min - 440 l/min
Head: 0 m - 25.5 m
Power: 0.37 kW - 4 kW

... heat to protect the pump under abnormal operating conditions. Additionally our non-contact structure prevents contact between rear thrust face and bearing to eliminate heat build-up during dry running. Chemical resistance The ...

Flow: 0 l/min - 1,400 l/min
Head: 13.5 m - 74 m
Power: 1.5 kW - 15 kW

... contact surfaces in the front and rear areas of the pump. Therefore high temperatures are avoided. This greatly improves resistance against dry running in comparison with conventional mag. drive fluororein ...

Flow: 0 l/min - 1,400 l/min
Head: 13.5 m - 70 m
Power: 0.4 kW - 15 kW

... contact surfaces in the front and rear areas of the pump. Therefore high temperatures are avoided. This greatly improves resistance against dry running in comparison with conventional mag. drive fluororein ...

Flow: 0 l/min - 4,000 l/min
Head: 0 m - 55 m
Power: 4 kW - 37 kW

... transfer of strong acids and alkalines as well as nearly all chemical solvents. Superior durability The exterior of the pumps is covered with ductile cast iron. Ample pressure resitance has been provided in the rear ...

Flow: 0 l/min - 5,000 l/min
Head: 0 m - 98 m
Power: 11 kW - 75 kW

... MDW is dimensionally compliant with the international standard (ISO2858, 3661) and is interchangeable with conventional sealed centrifugal pumps.

Flow: 0 l/h - 6,000 l/h
Pressure: 0 Pa - 500,000 Pa
Fluid temperature: 5 °C - 180 °C

... occuring pulsation could be minimised. Depending on the pump type the stroke rate differs. Contamination free design All liquid end prats are made of fluoro resin. The pump is so designed that no ...