- Power Transmission - Mechanical components >
- Motor and Motor Control >
- AC motor >
- Johnson Electric
Johnson Electric AC motors
Power: 0.55 kW - 315 kW
Intensity: 54.5 A
Torque: 119 Nm
... application field of high temperature and air conditioning industry. The D1CS exhaust motor is specially designed according to the engineering requirements. The series motor has the characteristics ...
Dalian Dalmo Electric Motor Co. Ltd
Power: 1.5 kW - 200 kW
Intensity: 4.25 A - 490 A
Torque: 539 Nm
... degrees C. The two kinds of motors have the same parameters. The motor has good closeness. The motor protection level for general places is IP44, and the motor protection ...
Dalian Dalmo Electric Motor Co. Ltd
Power: 0.75 kW - 315 kW
Intensity: 54.9 A
Torque: 2 Nm
... YBX3 series high efficiency flameproof three-phase asynchronous motor is a series of self sealing fans, fan fans, squirrel cage and high efficiency flameproof three phase induction motors developed by ...
Dalian Dalmo Electric Motor Co. Ltd
Power: 9.2 kW
... gearbox and electric motor, our product range includes standard three-phase motors and single-phase motors as well as brake motors, ATEX motors ...
Rehfuss Drive Solutions GmbH
Power: 500 kW
... Converter-controlled machines Energy-saving designs (optimised efficiency) High-Speed Machines up to 15,000 rpm and 500 kW Motors for marine applications to regulations of international classification societies
Schorch
Power: 200 kW - 2,000 kW
To relevant standards: IEC, VDE, DIN, ISO, EN Degree of protection IP55, cooling IC411 Non sparking to IEC 60079-15 Explosion protection Exe to EN 60079 Rated voltages from 2 to 11 kV Rated frequency 50 or 60 Hz No. of poles ...
Schorch
High-Speed Machines – High-speed asynchronous machines for industrial applications Reduced volume and weight Technical and economical process optimisation Low vibrations Low maintenance requirements Design features To relevant standards ...
Schorch
Power: 0.33 ch - 10 ch
Torque: 1.0105 ft.lb - 30.0999 ft.lb
Rotational speed: 0 rpm - 1,800 rpm
Standard Features - Manual Reset Protectors - High Efficiency Dual Cap Design - High Quality Molded Gaskets - Over 300% Starting Torque - Cast Iron End Bells - Dual Oversized Ball Bearings - Dependable Mechanical Starting Switch - ...
Techtop
Power: 0.09 kW - 18.5 kW
MS series aluminium housing three-phase asynchronous motors, with latest design in entirety, are made of selected quality and conform to the IEC standard. MS motors have good performance, safety and ...
Power: 2.2, 1.5 kW
ELECTRIC MOTORS Foot model type B 3. Insulation class IP 44 (DIN 40050. Three phase motors.
Torque: 7, 15 Nm
Rotational speed: 180, 160 rpm
The KDU Series are Direct Drive Motors which achieve 10 arc-sec positioning accuracy as well as ±0.5 arc-sec repeatability with a resolution of 0.16 arc-sec. The KDU has a large Hollow Shaft design which allows cables, ...
Power: 0.375 kW - 2.2 kW
Rotational speed: 2,850 rpm
... How to Select Pump and DC Motor Combinations: The following section contains pump/motor curves for various combinations of pumps and motors used on Stone hydraulic ...
Power: 4,021 W
Intensity: 9 A
Torque: 32 Nm
... a high torque EC Fan Motor. WHAT IS EC MOTOR TECHNOLOGY? An Electronically Commutated (EC) motor is a brushless motor where the commutation of the ...
Power: 0.06 kW - 315 kW
Rotational speed: 1,000, 750, 3,000, 1,500 rpm
Diameter: 56 mm - 355 mm
Huifeng’s three phase motors are general purpose motors and designed according to IEC 60034. The motors can be customized according to your requirement. •Junction Box is 90° Rotatable ...
Huifeng Motors
Power: 0.25 kW - 2.2 kW
Rotational speed: 3,600, 1,800 rpm
Operating temperature: -10 °C - 40 °C
Huifeng’s NEMA standard series motors are designed in accordance with NEMA MG.1:2016. •Rigid base (Welded on), or C-face with removable reet or round body (footless) are optional •T flange and customized shaft end ...
Huifeng Motors
Power: 0.06 kW - 5.5 kW
Rotational speed: 1,000, 1,500, 3,000 rpm
Operating temperature: -10 °C - 40 °C
... phase and single phase motors are suitable for fans and blowers, the motors are reliable, durable, high efficient, flexible and safe, your overall operating costs and downtime can be minimized by using ...
Huifeng Motors
Rotational speed: 500, 600 rpm
Diameter: 48 mm
Operating temperature: -30 °C - 80 °C
The syncronous motors work only from an alternate current and consequently their speed is strictly bound to the frequency of the power line wired.It could be ordered in clockwise, anticlockwise and no-sense rotation.
Rotational speed: 450, 375 rpm
Diameter: 38 mm
Operating temperature: -30 °C - 80 °C
The syncronous motors work only from an alternate current and consequently their speed is strictly bound to the frequency of the power line wired. It could be ordered in clockwise, anticlockwise and no-sense rotation.
Power: 0.09 kW - 18.5 kW
... of variants: ABM AC induction motors are available as energy-saving motors, single-phase motors, liquid-cooled motors, two speed motors, ...
... output. Thanks to optimized cooling characteristics, the special enclosed AC motor design with housing and cooling fins enables a constantly high continuous output. As traction motors in battery-operated ...
Rotational speed: 6,000, 7,250, 7,000 rpm
... enclosed motors for short-time duty. This special design without a housing features high peak powers and an optimum price-to-performance ratio. Typical uses are applications with high peak loads and low continuous outputs, ...
Power: 0.06 kW - 22 kW
Operating temperature: -20 °C - 40 °C
... 2018, the manufacture of HL motors has been fully automatic. We have thus eliminated human errors that could result in qualitative shortcomings. We provide complete servicing, diagnostics and calibration of electric ...
CAG Electric Machinery s.r.o.
Power: 0.06 kW - 3 kW
Rotational speed: 1,500, 3,000 rpm
Operating temperature: -20 °C - 40 °C
HM motors are delivered in two variants. HM1 for the expected performance during the motor run or HM2 for the expected performance during the motor startup and run. In our company, ...
CAG Electric Machinery s.r.o.
Power: 0.75 kW - 355 kW
Operating temperature: -20 °C - 40 °C
... 2018, the manufacture of HL motors has been fully automatic. We have thus eliminated human errors that could result in qualitative shortcomings. We provide complete servicing, diagnostics and calibration of electric ...
CAG Electric Machinery s.r.o.
... synchronous and asynchronous motors. Our high efficiency motors enhance the capacity to generate the maximum benefits for those who going to use them. The objective of the TDM is to provide high-performance ...
Power: 20 W - 250 W
• Asynchronous and brushless motors with high energy efficiency and low consumption • Programmable electronic board • Low noise and vibration • Possibility of combining motor ...
Power: 20 W - 300 W
• High performance asynchronous motors combinable with stainless steel fans • Power output: 20 – 300 W Applications • Professional kitchen ovens
•High efficiency asynchronous and brushless motors for kitchen range hoods • Programmable integrated electronic card (fixed speed or 0-10V control) • Air flow from 350 to 900 m3/h • ...
Power: 1 ch - 400 ch
Rotational speed: 1,500 rpm
... inpro seals Two-year warranty High Horsepower Motors For applications requiring a higher horsepower motor, Magnetek offers Blue Max motors in a 5000 series frame, capable of up ...
Power: 1,160 W - 2,200 W
... commutator motor and single fan stage. The rotor is supported with two ball bearings enabling vertical or horizontal installation of motor. The motor is designed for insulation class ...
DOMEL D.O.O.
... solutions of motors / motorizations. Most common used motors are: hydraulics (working on a range of 25 to 400cm3/rev.), direct current electric motors with inner reduction ...
Power: 0.12 kW - 4 kW
Torque: 0.6 Nm - 19.9 Nm
Rotational speed: 1,500 rpm - 3,000 rpm
... FULLY ENCLOSED (IP 55) STANDARD ASYNCHRONUS MOTORS Single-phase motors comply with the same standards as 3-phase motors in mechanical terms. The rotating field that creates the motor ...
Gamak Makine Sanayi A.Ş.
Power: 0.1 ch - 1 ch
Rotational speed: 825, 1,075, 1,625 rpm
... Direct Drive Blower Motors are designed to meet manufacturer’s requirements for drive ventilation units The PSC Ventilation Direct Drive Blower Motor is continuous duty and air over Designed ...
Gw industry
Power: 0.333, 0.25, 0.75, 0.5 ch
Rotational speed: 1,725 rpm
Resilient Base Motors-Single Phase Fan & Blower Service GW Single Phase Fan&Blower Motors are suitable for belt-driven fan or fan-on-shaft applications The Single Phase Fan&Blower Motor ...
Gw industry
Power: 0.16, 0.25, 0.33, 0.5, 0.75 ch
Rotational speed: 1,725 rpm
Residential/Industrial-Split Phase-Belted Fan Motors GW Residential Industrial Belted Fan Motors are low starting torque The Residential Industrial Belted Fan Motor has automatic overload ...
Gw industry
Torque: 50 Nm
Product description: Driver Integrated Servo Motor,servo motor, automation controller, stepper motor driver NEMA 52,50N.M. stepper motor Positional error: ±5% Ambient ...
Power: 1 kW
Rotational speed: 3,000, 2,100 rpm
... concepts demand excellent dynamics and performance within the smallest amount of space possible. 8LVA three-phase synchronous motors from B&R were specially developed for these applications and provide users with the ...
B&R Industrie-Elektronik
Power: 80, 100, 185, 205, 54 kW
Torque: 205 Nm - 2,200 Nm
Rotational speed: 900 rpm - 7,000 rpm
- Application Field ◘ City Bus, Pure Electric Bulldozer, Pure Electric Excavator, etc - Performance Superiority ◘ Response time within 10ms ◘ High power density ◘ High control accuracy ...
Intensity: 1 A - 6.4 A
Torque: 0.3 Nm - 110 Nm
Rotational speed: 0 rpm - 833 rpm
... generation from the motor through the use of high-efficiency technology. Requires AlphaStep AZ Series Stepper Motor Driver. • Battery-Free, Mechanical Absolute Encoder • Closed Loop Performance, ...
ORIENTAL MOTOR
Intensity: 1.5 A - 170 A
Rotational speed: 1,200, 1,800 rpm
Operating temperature: 40 °C
The BlueMAX is a totally enclosed, three phase motor designed for inverter or vector applications where up to a 2000:1 constant torque speed range is required. Typical uses include: Material handling, ...
Yaskawa America, Inc. - Drives & Motion Division
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining