- Hydraulics - Pneumatics >
- Pump >
- Chemical pump >
- THE LEE COMPANY
THE LEE COMPANY chemical pumps
Flow: 2,400 l/h
Pressure: 28 MPa
Fluid temperature: -10 °C - 100 °C
... on / stop" mode and adjusts the output flow. FEATURES AND ADVANTAGES Strong, compact design; no moving seal, no leakage, sealing performance is better than plunger pump. The variable eccentric mechanism ...
Flow: 0.9, 5,097 m³/min
Pressure: 10,000 psi - 14,147 psi
Two independent systems, N2 pumping system and acidizing pumping system, integrated on one unit reduce the cost and footprint, delivering high economical efficiency; Wide displacement and pressure ranges, stable nitrogen ...
Yantai Jereh
... shavings to be detected inside the pump, the main reason for causing pump damage in the past. managed to design an appropriate bypass in such a way that it can be mounted or replaced without having ...
Excellent for mixing, blending and recirculating a variety of fluids Ideal for the chemical and petroleum markets Cast iron helical gear pump Two-piece backplate for flexible sealing options ...
Roper Pump
Flow: 2,400 m³/h
Pressure: 10 bar
Head: 40 m
... every seal arrengement. Use RB pumps can handle slightly contaminated liquids in waste water treatment plants, clean water for cooling towers or condensate recovery plants, viscous liquids in evaporators in food or ...
SALVATORE ROBUSCHI & C. srl
Flow: 0 us gal/min - 15,400 us gal/min
Pressure: 0 psi - 1,450 psi
Head: 0'00" ft - 3600'00"
TYPE HPH Multi stage centrifugal pumps in ring-section design. Pump inlet: axial or radial with flanges positioned at 90° increments Discharge flange: radial positioned at 90° increments Replacable ...
DÜCHTING PUMPEN
Flow: 20 l/min - 74 l/min
Fluid temperature: 0 °F - 180 °F
... the service life of the pump and to broaden the range of conditions each model can be used in. The AutoPump® AP4+ Aggressive Fluids Model features upgraded materials for many parts to further extend the service life ...
QED Environmental
... long shafts and couplers between the pump and motor. The broad, versatile line includes models with rugged housings of cast iron and stainless steel that stand up to strong chemical herbicides. Stainless ...
Hypro Pressure Cleaning
Flow: 0 l/h - 43,800 l/h
Power: 0.37 kW - 3.5 kW
Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension. Our pumps are widely used ...
Liverani
Flow: 0 m³/h - 220 m³/h
Pressure: 0 bar - 40 bar
Head: 0 m - 400 m
The Osna NMH is a multi-stage horizontal centrifugal pump that is suitable for pumping clear and slightly contaminated liquids in pressure boosting plants, central heating systems, cold and hot water circulation, water ...
Flow: 28 l/min - 148 l/min
Head: 15 m - 17 m
The best solution for suction and transfer of liquids, thanks to the strong self-priming capacity and the ability to run even with discontinuous presence of the liquid in the suction. The ECC series, made of brass CB754S with DC motor ...
Tellarini
Flow: 3,000 m³/h
The EN 733 MU Series of End-Suction Centrifugal Pump, manufactured by Pompe Garbarino S.p.A., is specifically designed for fresh and sea water, condensate, oils, chemical and petrochemical products. It ...
Pompe Garbarino S.p.A.
Flow: 1.4 l/min
... the main pump parts and enable the pumps to be used with strong acids, strong alkalis, and chemical solutions that erode general-purpose plastics. The heat resistance is also excellent, ...
WELCO Co., Ltd.
Flow: 2.5 m³/h - 100 m³/h
Head: 80 m
Power: 750 W - 45,000 W
... MECHANICAL EQUIPMENT CO.,LTD provides good quality fluorine plastic lined centrifugal chemical pump. IHF single stage end suction fluorine plastic lining centrifugal pump is with disposable ...
Wenzhou Solid Mechanical Equipment Co., Ltd.
Flow: 0.1 l/min - 30 l/min
Pressure: 5 bar
... Capable of Parts Replacement/Maintenance Without Removing The Chemical Piping The main body of the pump can be disassembled easily into eight components using only a couple tools. The pump ...
TACMINA CORPORATION
... up to 55 gallon drums Floating check valve allows liquids to drain back from pump when not in use Lubricants, solvents, thinners, automotive additives, chemicals, non-corrosive liquids
Alemite
Flow: 25 l/s
Head: 275 m
Power: 0.37 kW - 37 kW
... fire safety ‘jockey’ systems / system pressure upkeep; boiler feed water pumping DescriptionThe Armstrong 4700 MultiStage Pumps are designed for reliability and low maintenance cost MaterialsCast iron or stainless steel ...
The OSIP ZS 65 - 75 - 80 - 100 - 120 - 125 - 180 - 200 - 220 is a low pressure industrial electronic pump. This device is used for pumping liquid coolants and lubricating mixtures. The ZS Series is applicable for systems ...
Osip
Flow: 500 l/h - 1,080 l/h
... head pressure. Its inlet and outlet threaded ports are approximately 1/2". The body uses brass and steel component. The pump may be used with both balanced and normal bypass valves. NBR, EPDM and VITON gaskets and ...
Nuert
... Powder coating pump which can be used for a wide range of application. The whole set comprises of different variation of pumps. This may include a wagner powder pumps, a gema powder injectors, ...
Hangzhou color powder coating equipment ltd
Flow: 0 l/min - 100 l/min
Pressure: 10 bar
Head: 5 m - 50 m
The NGM pumps are with one or two impellers. The two impeller pump can gain bigger flow rate. In fact they consist of two pumps connected in series, one is ejector-pump ...
Fujian Mindong Electric Co., Ltd.
Flow: 0 l/h - 0.06 l/h
... to 1500 mL/hr (60 mL syringe) Pumps continuously until you stop the pump Infusion rate can be changed while pumping Syringe purge mode Power failure mode allows pump ...
New Era Pump Systems, Inc.
Flow: 0 l/min - 18 l/min
Head: 0 m - 40 m
Power: 0.35, 0.25, 0.5 kW
... laboratory applications Advantages Suitable for the delivery of gas shares Steep characteristic curve High pressures with compact design
SPECK-PUMPEN
Flow: 0 l/min - 0.032 l/min
Pressure: 6.9 bar
Fluid temperature: 60 °C
The GPD-Q0SSY Low Speed Pneumatic pump is an ideal power alternative when an electrical hook up is not readily available. FEATURES Provides a compact, variable speed, air powered drive Stroke rate is easily varied ...
Fluid Metering
Flow: 180 us gal/h - 550 us gal/h
Power: 0.5, 0.1 ch
... Spaces.” Hartell’s PlenumPlus Condensate Pumps are the only plenum condensate pumps on the market that meet this standard. When safety counts, you can depend on PlenumPlus Commercial Grade Series of ...
Hartell
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining