Lincoln chemical pumps

Flow: 9 us gal/min - 215 us gal/min
Head: 15 m - 92 m
Power: 0.08 ch - 5 ch

The T-Mag AM Series Mag Drive Pump consists of three sizes of a Mag Drive Pump, the 1/12, 1/4 and 1/3 HP. The fractional sizes are for low flow applications looking for a compact and ...

Flow: 3 m³/h - 3,000 m³/h
Head: 0 m - 150 m

Capacity: 3~3000m³/h with 2950RPM,1450RPM,980RPM. Max head: 150M Medium Temperature: -20℃~80℃ Material: Cast iron-HT200,HT250;SS304,SS316,SS306L,Duplex SS,Bronze; Motor: 380V,415V,660V;IP54,IP55;50HZ,60HZ;

Flow: 2,400 l/h
Pressure: 28 MPa
Fluid temperature: -10 °C - 100 °C

... on / stop" mode and adjusts the output flow. FEATURES AND ADVANTAGES Strong, compact design; no moving seal, no leakage, sealing performance is better than plunger pump. The variable eccentric mechanism ...

Flow: 0.9, 5,097 m³/min
Pressure: 10,000 psi - 14,147 psi

Two independent systems, N2 pumping system and acidizing pumping system, integrated on one unit reduce the cost and footprint, delivering high economical efficiency; Wide displacement and pressure ranges, stable nitrogen ...

... shavings to be detected inside the pump, the main reason for causing pump damage in the past. managed to design an appropriate bypass in such a way that it can be mounted or replaced without having ...

Excellent for mixing, blending and recirculating a variety of fluids Ideal for the chemical and petroleum markets Cast iron helical gear pump Two-piece backplate for flexible sealing options ...

Flow: 2,400 m³/h
Pressure: 10 bar
Head: 40 m

... every seal arrengement. Use RB pumps can handle slightly contaminated liquids in waste water treatment plants, clean water for cooling towers or condensate recovery plants, viscous liquids in evaporators in food or ...

Flow: 0 us gal/min - 15,400 us gal/min
Pressure: 0 psi - 1,450 psi
Head: 0'00" ft - 3600'00"

TYPE HPH Multi stage centrifugal pumps in ring-section design. Pump inlet: axial or radial with flanges positioned at 90° increments Discharge flange: radial positioned at 90° increments Replacable ...

Flow: 20 l/min - 74 l/min
Fluid temperature: 0 °F - 180 °F

... the service life of the pump and to broaden the range of conditions each model can be used in. The AutoPump® AP4+ Aggressive Fluids Model features upgraded materials for many parts to further extend the service life ...

Flow: 0 l/h - 43,800 l/h
Power: 0.37 kW - 3.5 kW

Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension. Our pumps are widely used ...

Flow: 0 m³/h - 220 m³/h
Pressure: 0 bar - 40 bar
Head: 0 m - 400 m

The Osna NMH is a multi-stage horizontal centrifugal pump that is suitable for pumping clear and slightly contaminated liquids in pressure boosting plants, central heating systems, cold and hot water circulation, water ...

Flow: 28 l/min - 148 l/min
Head: 15 m - 17 m

The best solution for suction and transfer of liquids, thanks to the strong self-priming capacity and the ability to run even with discontinuous presence of the liquid in the suction. The ECC series, made of brass CB754S with DC motor ...

Flow: 3,000 m³/h

The EN 733 MU Series of End-Suction Centrifugal Pump, manufactured by Pompe Garbarino S.p.A., is specifically designed for fresh and sea water, condensate, oils, chemical and petrochemical products. It ...

Flow: 1.4 l/min

... the main pump parts and enable the pumps to be used with strong acids, strong alkalis, and chemical solutions that erode general-purpose plastics. The heat resistance is also excellent, ...

Flow: 2.5 m³/h - 100 m³/h
Head: 80 m
Power: 750 W - 45,000 W

... MECHANICAL EQUIPMENT CO.,LTD provides good quality fluorine plastic lined centrifugal chemical pump. IHF single stage end suction fluorine plastic lining centrifugal pump is with disposable ...

Flow: 0.1 l/min - 30 l/min
Pressure: 5 bar

... Capable of Parts Replacement/Maintenance Without Removing The Chemical Piping The main body of the pump can be disassembled easily into eight components using only a couple tools. The pump ...

... up to 55 gallon drums Floating check valve allows liquids to drain back from pump when not in use Lubricants, solvents, thinners, automotive additives, chemicals, non-corrosive liquids

Flow: 25 l/s
Head: 275 m
Power: 0.37 kW - 37 kW

... fire safety ‘jockey’ systems / system pressure upkeep; boiler feed water pumping DescriptionThe Armstrong 4700 MultiStage Pumps are designed for reliability and low maintenance cost MaterialsCast iron or stainless steel ...

The OSIP ZS 65 - 75 - 80 - 100 - 120 - 125 - 180 - 200 - 220 is a low pressure industrial electronic pump. This device is used for pumping liquid coolants and lubricating mixtures. The ZS Series is applicable for systems ...

Flow: 500 l/h - 1,080 l/h

... head pressure. Its inlet and outlet threaded ports are approximately 1/2". The body uses brass and steel component. The pump may be used with both balanced and normal bypass valves. NBR, EPDM and VITON gaskets and ...

... Powder coating pump which can be used for a wide range of application. The whole set comprises of different variation of pumps. This may include a wagner powder pumps, a gema powder injectors, ...

Flow: 0 l/min - 100 l/min
Pressure: 10 bar
Head: 5 m - 50 m

The NGM pumps are with one or two impellers. The two impeller pump can gain bigger flow rate. In fact they consist of two pumps connected in series, one is ejector-pump ...

Flow: 0 l/h - 0.06 l/h

... to 1500 mL/hr (60 mL syringe) Pumps continuously until you stop the pump Infusion rate can be changed while pumping Syringe purge mode Power failure mode allows pump ...

Flow: 0 l/min - 18 l/min
Head: 0 m - 40 m
Power: 0.35, 0.25, 0.5 kW

... laboratory applications Advantages Suitable for the delivery of gas shares Steep characteristic curve High pressures with compact design

Flow: 0 l/min - 0.032 l/min
Pressure: 6.9 bar
Fluid temperature: 60 °C

The GPD-Q0SSY Low Speed Pneumatic pump is an ideal power alternative when an electrical hook up is not readily available. FEATURES Provides a compact, variable speed, air powered drive Stroke rate is easily varied ...