Volumetric flow rate: 0.3 l/min - 140 l/min
Process temperature: -20 °C - 70 °C
SONOFLOW CO.55 CLAMP-ON SENSOR - NON-CONTACT FLOW METERS FOR LIQUIDS IN FLEXIBLE TUBES The ultrasonic clamp-on flow meter SONOFLOW CO.55 measures the flow ...
Process temperature: -20 °C - 70 °C
Process pressure: 0 bar - 16 bar
... features simple and easy mechanical installation and electrical integration procedures. It is equipped with two current outputs or pulse outputs, respectively, the service interface permits ...
Volumetric flow rate: 0.63 ft³/min - 120 ft³/min
... CentriFlow Meter from Eastern Instruments is a Solid Particle Mass Flow Meter that is durable, accurate, maintenance-free, compact, and cost-effective. It is unique and positioned to ...
Eastern Instruments
Mass flow rate: 2 lb/h - 200 lb/h
Volumetric flow rate: 1.69 ft³/min - 90 ft³/min
... measuring less expensive products, flow meter cost can be a determining factor in the selection of a flow meter. Unfortunately, extremely accurate flow ...
Eastern Instruments
Mass flow rate: 100 lb/h - 1,000,000 lb/h
Volumetric flow rate: 0.1 ft³/min - 156.3 ft³/min
Repeatibility: 0.1 %
... depending on your process. The CentriFlow® Type I Meter, just as all CentriFlow® brand meters, is a mass flow meter designed for measuring bulk solids continuously ...
Eastern Instruments
Process temperature: -30 °C - 80 °C
... permanently installed flow meter in distribution stations, in front of individual departments or for billing purposes of individual consumers. Advantages of the VA 520 flow meter: - ...
... from 1/2" to 12" DN 300 - Diameter freely adjustable at DS 400 - Output for 4...20 mA for m³/h - Pulse output for m³ (total flow) Chart recorder ...
Process pressure: 1.6, 2.5, 4 MPa
Precision: 5 %
Electromagnetic flowmeter type PEM-500 is applicable to the measurement of flow of the liquids with minimum conductivity of 5ěS/cm. Device measures flow and volume of liquids in both directions ...
Volumetric flow rate: 0.3 m³/h - 71 m³/h
Process temperature: -15 °C - 100 °C
Process pressure: 0 bar - 10 bar
... Treatment. 2.FineTek EPD/EPR series Flow Meter with high quality 3.EPR series Paddle Wheel Flow Meter 4.FineTek EPR Paddle Wheel Flowmeter 5.Total ...
Process temperature: -20 °C - 60 °C
The mag-flux M1 measuring transducer was developed specifically for use with the magnetic-inductive mag-flux-series flow sensors. With an optionally available operating module and a local display, the measuring transducer ...
Mass flow rate: 24 kg/h - 48,000 kg/h
Process temperature: -40 °C - 130 °C
Precision: 0.2 %
... mass flow meters are your go-to general-purpose mass flow meter. An affordable Coriolis mass flowmeter you can rely on Achieve robust, ...
Process temperature: 40 °C - 230 °C
Precision: 1 %
Repeatibility: 0.25 %
SITRANS FS290 is a portable ultrasonic flowmeter system for monitoring volumetric flow in pipes. It contains the SITRANS FST090 battery-operated transmitter and SITRANS FSS220 clamp-on sensors. Install ...
Volumetric flow rate: 0 l/min - 350 l/min
Process temperature: -40 °C - 140 °C
Process pressure: 0 bar - 16 bar
Magnetic Inductive Flowmeter (Flow Meter) - All Metal - Stainless Steel - MIM Measuring range: 0.03 - 3 l/min ... 1.5 - 350 l/min liquids Accuracy: ±(0.8% of reading + 0.5% of FS) pmax: ...
KOBOLD INSTRUMENTATION
Volumetric flow rate: 2 m³/h - 113,000 m³/h
Process temperature: -20 °C - 120 °C
Process pressure: 16 bar
Suitable for flow measurement of liquids with conductivity higher than 20 uS/cm. Materials Body: EN 1.4404 (SS 316L), PVDF Sensor head: PVDF Electrodes: Hastelloy C, EN 1.4404, Zr, Ti y Tantalum Options High ...
TECFLUID
Volumetric flow rate: 0.2 l/min - 16 l/min
Process temperature: -10 °C - 80 °C
Process pressure: 0 bar - 160 bar
... connection plates. Quickly replaceable without long process interruption output signal: Pulse signal The SIKA gearwheel volume sensors are suitable for the detection of volumetric flows ...
SIKA
Volumetric flow rate: 10.6 m³/h - 226.8 m³/h
Process temperature: -20 °C - 100 °C
Process pressure: 0 bar - 16 bar
... Ultrasonic flow meters optimize heat pump efficiency with low pressure drop, robust design, and advanced features. Integrated heat energy measurement, gas bubble, and glycol detection ensure safety and ...
Allengra GmbH
Volumetric flow rate: 0.1 m³/h - 381,703.5 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 0 bar - 250 bar
Electromagnetic Flow meter does not have any moving parts, ideal for wastewater applications or any dirty liquids which is conductive or water based, or for applications where low-pressure drop and low ...
Holykell
The FLODEM electromagnetic flow meters are based our decades of experience. They've are highly reliable, easy to operate and very suitable for harsh conditions.
SMAAT TECHNIQUES SAS
Process temperature: -45 °C - 80 °C
Precision: 0.2, 0.5 %
... magnetic flow meter can reach 0.2%. 2. Wide measurement range: electromagnetic flow meter can measure the flow of various fluids, applicable to a ...
Process temperature: -20 °C - 60 °C
Process pressure: 0.5 MPa
Precision: 1.5, 2 %
... Chimney exhaust gas flow rate measurement Calcination furnace flue gas flow measurement Gas process air flow measurement Compressed air flow measurement Half-way ...
Process pressure: 16 bar
Precision: 0.5 %
... of electromagnetic flowmeter display part flow meter and wireless communication module. The wireless communication module is equipped with IOT network card, that is SIM card. Its ...
Kamboda
Volumetric flow rate: 600 m³/h
Process temperature: -10 °C - 85 °C
... electrodes DIN or Tri-clamp process connection 4-20mA current, pulse, HART, Modbus RS485 and bluetooth output options Suitable for food, dairy, beverage and pharmaceutical applications
LTH Electronics Ltd
Volumetric flow rate: 0 m³/h - 305,000 m³/h
Process temperature: -20 °C - 150 °C
Process pressure: 0 psi - 9,000 psi
... for the flow rate and flow volume is used for configuration of the flowmeter parameters such as output scaling, total flow reset, damping, etc. Indumart ...
Process temperature: -10 °C - 60 °C
Precision: 0.2 %
... entire sensor body at equal area, measure and report the average flow rate over the full diameter of the pipe. The specific design of the multi-electrode sensor compensates for variable flow profiles, ...
Process temperature: -20 °C - 120 °C
Precision: 0.2, 0.5, 1 %
... Good repeatability, short-term repeatability up to 0.05%~0.2%, in the trade settlement is the preferred choice of flow meter. 3. Output pulse frequency signal, no ...
Xian Kacise Optronics Co., Ltd.
Process temperature: -10 °C - 80 °C
Precision: 1 %
Clamp-on type ultrasonic energy meters for flow and heat consumption measurement. Introduction D116-PT1000 is an upgraded version of D116, adding heat measurement function, so it can detect flow ...
Precision: 0.2 %
... electromagnetic flowmeter for DMA (District Metered Area) • Invest smartly through ‘single box’ DMA solution – combining flow, pressure and data-logging • Have greatest confidence in your billing based ...
Shanghai Powerbuilder Automation Technology Co. Ltd
Process temperature: -40 °C - 300 °C
Process pressure: 16 bar - 420 bar
LTD Series General Electron Flowmeter (hereafter call flowmeter), is a precise flowmeter to measure the flow of liquid in the tube. This flowmeter is a patent right product, ...
Volumetric flow rate: 15 l/h - 450 l/h
Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 30 bar
... measurement accuracy is not affected by bumpy road, display or totalizer Optional, completed set of flow meter could record the instantaneous flow and cumulative flow, ...
Soway Tech Limited
Please specify:
Help us improve:
remaining