DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C
Model RET-DS / REF-DS are the Direct Acting Pressure Reducing Valve designed with Duplex Stainless Steel material providng more options for different industries. Pressure Reducing Valve protecting the ...
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C
... orifice. Unique laminar flow design ensures sensitive, repeatable control. Perfect for use in application requiring precision gas metering, and circuit speed or sequencing control. FEATURES • - 3 degree Pin Angle • ...
DN: 0.5 in
Pressure: 20.7 bar
Temperature: 149 °C
... actuated trap) valve. This thermostatic actuator senses the fluid temperature and will modulate the valve open to initiate flow if the temperature falls below the valve’s set point. Once ...
DN: 0.375, 0.5 in
Pressure: 10 bar
Temperature: 66, 149 °C
... TV/HAT-RA-LP, the reverse acting cooling valve actuator modulates the valve open to allow a flow of cool water through the system. If the cooling water temperature is above the valve’s ...
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
... ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material of sample-contacting ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... Needle valve with shutting-off and fine-adjusting function - Compact design for surface mounting - Connections: G 1/4" i - Corrosion-resistant - High level of gas tightness - Material of sample-contacting ...
DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C
Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...
DN: 25 mm - 300 mm
Dueker gate valves – for water and gas.Sophisticated technology. Fully-fledged gate valves. Dueker service connection valves are essentially the same as gate valves ...
DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C
... in systems with low pressures. Fuels: gaseous Applications: Thermal Power Plants, Steelworks, Biogas & Landfill Gas, Industrial Combustion, Air Separation Plants – PSA NOMINAL ...
Kühme Armaturen GmbH
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C
... Applications: Thermal Power Plants, Gas Turbines & Gas Compressor Units, Steelworks, Refineries & Petrochemical Plants, Biogas & Landfill Gas, Pipeline & Gas ...
Kühme Armaturen GmbH
DN: 15 mm - 50 mm
Pressure: 21 bar
Temperature: 400 °C
QUICK-CLOSING VALVE TYPE KVF The KVF-Type is part of the KÜHME High-Performance Class. KVF-Valves are especially designed for quick and premium tight shut-off of any type of steam type fluids. This electro ...
Kühme Armaturen GmbH
DN: 65 mm - 300 mm
Pressure: 0 mbar - 1,600 mbar
Temperature: -15 °C - 60 °C
VMH Safety shut off valves, slow opening and fast closing with hydraulic or pneumatic actuator The VMH type valve is a safety shut off valve for gaseous media operated by hydraulic ...
Elettromeccanica Delta S.p.A.
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
... modulating control valves of the newly conceived MDV-D1 series are built according to the EN 161 norms to be used on industrial combustion systems. They are particularly suitable for the proportional regulation of all ...
ECONEX S.R.L.
DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C
... Römer flow and stop valve program consists of throttle, shut-off and check valves. The function fittings offer fine adjustment possibilities for the precise regulation of fluid flows. Throttle valves ...
AVS Römer
DN: 2.5 mm
Pressure: 3 bar - 10 bar
Temperature: 0 °C - 140 °C
AVS Römer pressure relief valves are used for protection in closed circuits. When the set response pressure is exceeded, the valve opens and discharges the fluid.
AVS Römer
DN: 4 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 140 °C
... anti-vacuum membrane solenoid valve and relief valve regulates negative pressure via an anti-vacuum membrane, with a relief valve opening in the event of overpressure and relieving upward ...
AVS Römer
DN: 15 mm - 150 mm
Pressure: 2 bar - 40 bar
Temperature: 250 °C
GESTRA control valves V 701 with electric or pneumatic drive For the open and closed-loop control of gas, steam and liquid up to 250 °C. The directly mounted positioner used with the pneumatic drives ...
GESTRA AG
Pressure: 0 psi - 5,500 psi
The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen ...
Generant
DN: 2 mm - 30 mm
This bi-directional valve is ideal for controlling varying flow rates of gas, liquid and slurries. Rangeability in excess of 350 to 1 Cavitation and noise reduction trim available Bi-directional ...
DN: 20 mm - 200 mm
... style control valves, the GS-General Service Valves combines advanced levels of body configuration, trims and actuation to produce a valve assembly capable of premium performance at a ...
DN: 20 mm - 500 mm
The SD-Severe Duty valve is Copes-Vulcans premium severe duty and critical service control valve design. While virtually identical in outward appearance to the Copes-Vulcan legendarily rugged and dependable ...
DN: 17 mm - 59 mm
Pressure: 1 bar - 16 bar
Temperature: -20 °C - 80 °C
2/2-way ball valve with full bore Producer Medium:Compressed air, vacuum, inert gases Material of seal:NBR Material of locking ring:Stainless steel 1.4301 Material of O-ring:NBR Material of retaining ring:Technopolymer Type:valve Price ...
DN: 300 mm - 1,200 mm
Pressure: 500 mbar
Temperature: 400 °C - 850 °C
DESIGN – Welded assembly register specially designed for air and warm gases transport. – Mounting flange, according to ISO 5211 standard: makes easy the mechanichal (gear box), pneumatic, and electric actuator adapting. – ...
TECOFI
DN: 3 mm
Pressure: 0 bar - 200 bar
Brass control valve (e. g. for the pressure regulator outlet) For non corrosive gases and gas mixtures up to qualität 6.0 Suitable for pressures up to 50 bar (control valve) or 200 bar ...
DN: 3 mm
Pressure: 0 bar - 200 bar
... Control- and shut-off valves (e.g. for the pressure regulator outlet) For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0 Suitable for pressures up to 50 bar (control ...
DN: 0.375 in - 1 in
3/8 to 1 in. (10 to 25mm) Description: Series GBV 2-Piece Brass Gas Ball Valves are used in residential applications for manufactured natural gas and LP gas on in-house ...
DN: 0.5 in - 2 in
Pressure: 5 bar
Temperature: -5 °C - 60 °C
... heavy-type gas ball valves constructed out of brass. It is used together with a steel pipe, but it can also be used with a copper pipe if the pipe has an ISO 7 male conical fitting. It is ideal to be ...
SFERACO
DN: 15 mm - 50 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
The pinch valves from Ross has a compact and economical design that is utilized for a broad range of applications in the industrial automation industries. It is ideally used for compressed air and other media. It is a ...
ROSS EUROPA
DN: 50 mm - 80 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (01): Aluminum alloy. Threaded cap (03): POM (polyoxymethylene). O-Ring (06): NBR (nitrile rubber). Screw (07): galvanized steel. Sleeve (08): see material selection. Port: Female threads, DIN ...
ROSS EUROPA
DN: 40, 32 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (01), Flange (04): POM(polyoxymethylene). Screw (07): galvanized steel. Sleeve (08): see material selection. Port: Flange, (DIN PN 10/16). Ambient temperature: -20° to +50°C. Media temperature: ...
ROSS EUROPA
Temperature: 180, 260 °C
The most reliable and durable valve Our patented compact Purged Lip Sealing Valve (PLSV) is a disruptive analytical valve that offers the best of both worlds: a longer lifetime than ...
DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h
This valve type is an efficient and durable solution for gas engineering deposit fluid systems, where erosion from solids reduces the life of valve internal components. High ...
Zaklady Automatyki POLNA S.A.
DN: 300 mm
Pressure: 100 bar
2-directional valves are applied in gas engineering in case of a change in fluid flow direction in the installation. Basic design comprises passage cage valve DN300, PN100, Kv1350. The ...
Zaklady Automatyki POLNA S.A.
DN: 200 mm
Pressure: 100, 80 bar
Flow rate: 175 m³/h
... on the type of valve. High pressure recovery valves (butterfly valves, ball valves) have a low FL value and are not suitable for operation under throttled flow and cavitation ...
Zaklady Automatyki POLNA S.A.
... transferring to a keg, or ball lock disconnects for gas and for liquids. With the spunding valve, it is possible to get natural carbonation in the fermentation tank, by fermentation. ...
Please specify:
Help us improve:
remaining