- Hydraulics - Pneumatics >
- Valve >
- Control valve >
- Mival
Mival control valves
DN: 0.5 in
Pressure: 250 bar
Temperature: -20 °C - 80 °C
This type of valves allows the fast and exact regulation of the flow in a sense. Roquet commercializes regulators of 2 and 3 ways with connections with threaded fittings or plate.
DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 10 °C - 55 °C
special ball valve completely moulded in place extremely low clearance volume high operating reliability - high torque transmission due to generously dimensioned stem excellent flow characteristics
ASV Stuebbe GmbH & Co. KG
DN: 15 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C
Material sealing element (in contact with medium): reliable and economical good control characteristics high kv value visual position indicator
ASV Stuebbe GmbH & Co. KG
DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h
Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation using electric variable speed actuators Reproducible ...
ASV Stuebbe GmbH & Co. KG
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
A liquid or gas solenoid valve is used to control the flow of liquids or gases in an industrial automation system, irrigation systems, cooling systems, process control applications and ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... can open or close the valve in response to electrical commands. The type of mechanism can vary depending on the design of the valve, but often involves a shaft or lever that adjusts ...
DN: 4, 6, 8, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C
... The function of a shock absorber is built in a speed controller. Two-stage exhausting flow rate adjustment make the same control as a cylinder with a shock absorber possible. No more cylinder mounting type shock ...
Pressure: 0 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
This Exhaust Needle Valve controls the exhaust flow rate. The valve can be attached directly to a solenoid valve. Best suitable in case a cylinder, etc has no sufficient ...
DN: 4, 12, 10, 8, 6 mm
Pressure: 0 MPa - 1 MPa
Temperature: 0 °C - 80 °C
PP (Polypropylene) is applied for the body material to adapt to clean environment. Easy to check sanitary condition. Clear (semitransparent) color used for the resin body makes it possible to check visually the fluid (liquid) inside. All ...
DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C
... flow restrictor hydraulic valve. Operation The NV08-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed out of ...
Hydrabase
Pressure: 0 bar - 40 bar
Temperature: 95 °C
Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure control Designed ...
DN: 0.5 in - 6 in
Pressure: 10 bar - 250 bar
Temperature: -50 °C - 400 °C
... clean ball surface during valve operation, protect the seats from abrasion by fluid solid content and avoid the wedging in of solids between seat and ball surface cause of valve blocking. Similar to all ...
Penta Srl
DN: 1 in - 24 in
Pressure: 10 bar - 420 bar
Temperature: -50 °C - 720 °C
... unique technical solutions in the market. Like all PENTA products, SAT valves are equipped with metallic seats in PENTAFITE to allow the manufacturing of metal seated ball valves with absolutely ZERO ...
Penta Srl
DN: 0.5 in - 10 in
Pressure: 10 bar - 100 bar
Temperature: -100 °C - 400 °C
... with metallic seats that have been manufactured with PENTAFITE technology materials, Penta's Multi-Sport Valves showcase zero leakage rates. These valves are based on trunnion-mounted ball designs, and ...
Penta Srl
DN: 0.125, 0.5, 0.25, 0.375 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C
... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves ...
DN: 12, 7, 10, 8 mm
Pressure: 15 bar
Temperature: 0 °C - 90 °C
– Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials Brass housing (Ms58), nickel-plated Ball made of brass (Ms58), chrome-plated Handle ...
DN: 100 mm - 400 mm
Temperature: -25 °C - 150 °C
Butterfly valves suitable for intercepting powdered products - Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of ...
MIX S.R.L.
DN: 150 mm - 800 mm
Slide gate valves suitable for intercepting products in powder, granules, fibers and heavier materials - Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in ...
MIX S.R.L.
DN: 250 mm - 300 mm
Temperature: -15 °C - 100 °C
Butterfly Valves for silos suitable for intercepting powder products - Valve body in carbon steel - Size DN250 - DN300 - With square or round fixing flange - Monobloc gasket in NBR for continuous ...
MIX S.R.L.
DN: 50 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Athena Through-conduit gate valves - Designs utilize flanged and butt-weld end connections. - The full port bi-Directional flow capability minimizes pressure drop and turbulence. - Isolating valves ...
Athena Engineering S.r.l.
DN: 50 mm - 1,200 mm
... with the latest edition of API600 and ASME B16.34. All the gate valve provided with a drain valve at the lower part of the body used for tightness control & drain.
Athena Engineering S.r.l.
DN: 15 mm - 600 mm
Pressure: 16 bar - 250 bar
Electric ball valve Body material: Stainless steel, Carbon steel End connection: RF, BW Operation: Electric
Athena Engineering S.r.l.
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
> - Type: 3X2 > - Design: Spool with Cartridge Type > - Port Size: In/Out/Exhaust -1/4" BSP > - Media:Compressed Air, Filtered & Lubricated > - Ambient/Medium Température: - 5°-60°C > Materials of Construction: Aluminium, ...
UFLOW AUTOMATION
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
Type - 5X2 Design - Spool with Cartridge Type Port Size - In/Out- 1/4" BSP & Exhaust - l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, Nitrile, Brass, ...
UFLOW AUTOMATION
DN: 0.25, 0.125 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
Type - 5X3 Design - Spool with Cartridge Type Port Size - In/Out/Exhaust - l/4" BSP & Pilot Port l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, ...
UFLOW AUTOMATION
Pressure: 1.2 bar - 10 bar
Flow rate: 0 l/min - 300 l/min
AWF
DN: 150 mm - 180 mm
AWF
AWF
DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C
PTFE lined centric butterfly valve for corrosive fluids and high-purity applications. Designed and manufactured for over 20 years in Switzerland, Bianca is built for long-lasting use in highly demanding media and environments ...
InterApp AG
... precision formed tapered seat. For replacement Viton® O-ring Kit, see R110112.0-12mm high vacuum valve(T-Type) Accessories: S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05
Synthware glass
DN: 9 mm
... 0-12mm high vacuum valve (3-way) Accessories: S540008 0-8mm high vacuum plug and control knob Viton® O-ring at tip 37.05 S540012 0-12mm high vacuum plug and control knob Viton® O-ring at tip 42.05
Synthware glass
DN: 9 mm
... ® O-ring Kit, see R7010,or R108110.0-8mm high vacuum valve ,180° Accessories: S540004 0-4mm high vacuum plug and control knob Viton® O-ring at tip 28.40 S540008 0-8mm high vacuum plug and control ...
Synthware glass
DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C
The 21IA4T15GC is a 2-way angle seat air operated valve that is capable of providing high flow rates. Its body has been constructed out of stainless steel and it features a corrosion resistant actuator that can be rotated ...
DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions.
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.
DN: 0.125 in - 1 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
Series of quick exhaust valves in nickel-plated brass and in stainless steel
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
DN: 40 mm - 1,200 mm
Pressure: 2.5 bar - 16 bar
Temperature: -10 °C - 120 °C
Di Nicola manufactures single eccentric butterfly valves type lug, wafer and flanged in ductil iron EN GJS 400 to EN GJS 500 , malleable cast iron GJL 250 and high- nickel NI resist , carbon steel ASTM 216 WCB / N + GP ...
Di Nicola Infinam Srl
Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C
The NV-30 series is a precision adjustable flow control used in pneumatic and fluidic systems. 303 Stainless Steel construction provides excellent corrosion resistance. Flow control needle has 7 to 8 ...
DN: 0.5, 0.75 in
Pressure: 20.7 bar
Temperature: 149 °C
The HAT/FP is a reliable and automatic freeze protection valve designed to protect water resupply lines from freezing. This thermostatic valve controls flow based on temperature variations ...
Thermomegatech
DN: 0.5 in
Pressure: 20.7 bar
Temperature: 149 °C
... actuated trap) valve. This thermostatic actuator senses the fluid temperature and will modulate the valve open to initiate flow if the temperature falls below the valve’s set point. Once ...
Thermomegatech
DN: 0.5 in
Pressure: 13.8 bar
Temperature: 198 °C
... self-contained sample cooler temperature control valves can be used to control cooling media to economically remove heat from equipment or a process. In general, they can be used whenever ...
Thermomegatech
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... adjustment M&C RV 11-… needle valves, this is possible in a reliable and exact manner thanks to the optimum design of the valve control system. The use of corrosion-resistant materials ...
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
Hydraulic control valve used to reduce the inlet pressure to a preset lower level pressure in the outlet by means of a three way plastic reducing pilot incorporated. This valve controls ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
Hydraulic control valve used to reduce the inlet pressure to a preset lower level pressure in the outlet by means of a three way plastic reducing pilot incorporated. The control of the ...
A.G.P. VALVULAS 10 SL
Pressure: 303 bar
Temperature: 121 °C
... sampling components from high temperature liquids. It is an economical and reliable mechanical replacement for a solenoid shutoff valve and temperature controller, requiring no external source of electricity, air or hydraulics. The ...
Sentry Equipment
DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C
Optional Pump Controls are available for all Williams pumps to allow for automatic control of the injection rate The Williams PCV-125-AL Pressure Control Valve provides ...
DN: 0.375 in
Pressure: 200 bar
Flow rate: 20 l/min
FR1-06-KD is an accurately regulating flow restrictor with an integrated non-return valve. It is made of stainless steel W.St.1.4301 and designed for both oil and water hydraulics. Suited for in-line installation. FR1-06-KD ...
DN: 1 mm - 10 mm
Pressure: 0 bar - 25 bar
Temperature: 0 °C - 80 °C
characteristics ports RMQ threads G 3/8 function stepless regulation pressure range 0-25 bar Kv value DN 1 2 3 4 5 6 8 10 l/min 0,8 1,8 3,5 5,7 9,0 15 26 45 media gaseous - liquid - highly viscous switching cycles operating time ...
Müller co ax GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining