MSA Modbus detectors
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... identification and accurately measurement • Wide working temperature -30℃~70℃, suitable for extreme weather environment • Modbus RS485 output for online remote monitoring Specifications • Operating principle:Laser ...
MicroSafe 500 and 600 Series gas detectors feature a non-intrusive operator interface. Calibration and programming instructions appear in simple intuitive and sequential script on a 16-character backlit display. The transmitter ...
... with standard analog 4-20mA, and Modbus™ RTU RS-485 outputs and can be used with SmartWireless Site Sentinel CX/CXT controllers. The CX is a very low power device making it an ideal choice for a battery powered detector ...
... or Venturi Type of Conveying Pneumatic leanphase, vertical freefall ATEX rating Category 1/2 Output 4…20mA Trend, Modbus, Profibus TECHNICAL DATA •Fast detection of coarse particles, for as little ...
... -PVOC06 VOCs detector is on-line monitoring instrument of volatile organic compounds (VOC) based on the principle of photoion detection. It is fast in response with no poisoning phenomenon. Principle PID is a photoionization ...
Tianjin Zwinsoft Technology Co.,Ltd.
Continuous Particulate Monitor BAM1006—M adopts the principle of β-ray absorption to measure the particle concentration. It has the characteristics of high measurement accuracy, small size, light weight and easy operation. It has ...
Tianjin Zwinsoft Technology Co.,Ltd.
... toxic and harmful gases monitored on site into standard MODBUS/RS-485 communication protocol for Digital signal output and 4-20mA standard analog signal output. ZWIN-GasGuard06 CO Detector is widely ...
Tianjin Zwinsoft Technology Co.,Ltd.
A New Angle on Accuracy The MS-90 Plus+ combines the build quality and accuracy of different EKO sensors into one compact and efficient DNI, GHI and DHI total solar irradiance measurement solution, a reliable, accurate, cost-saving ...
HVD high voltage indicator is adapted for indoor electrical panel, used in MV / HV switchgear. It is connected via internal wiring to capacitive sensors inside the switchgear. Rated voltage 3~40.5kv, operation frequency 50Hz network to ...
... reliable and high-performance flame detector. It uses advanced flame analysis and identification technology to quickly respond to infrared radiation in a fire and has the highest false alarm immunity . The MIC-200-IR4 ...
... pushed into the detector, this system guarantees much more stability and less maintenance than the standard continuous flow sampling systems with capillaries. The precision of an FID detector and the ...
A suction type detector for indoor use. Sensor units are factory calibrated and delivered to site ready for use. Optional communication module for DeviceNet interface or PoE, ModBus/TCP Features: Sensor ...
... no consumables. The remote data transfer makes it possible to connect the monitor to data collection systems via RS232, Modbus, and analogue output. Atomic absorption with Zeeman background correction. Direct ...
... planned maintenance). The remote data transfer makes it possible to connect the monitor to data collection systems via RS232, Modbus, and analogue output. principle of operation Atomic absorption with Zeeman background ...
The DA100 is a "SMART" gas detector designed to detect and monitor flammable gases in the air in the range of 0-100% LEL using Catalyst Cell technology. The DA100 is an intelligent electronic device that applies Rezontech's ...
The DB100 is a "SMART" gas detector designed to detect and monitor toxic (CO, H2S, HCI, etc.), oxygen, and VOC gases in the air by applying electrochemical, galvanic, and PID sensors. The DB100 is an intelligent electronic ...
The new XgardIQ, our most intelligent fixed-point gas detector, increases safety by minimising the time operators must spend hazardous areas. This versatile transmitter and gas detector has a range ...
Crowcon Detection Instruments
... Ex-proof audible and visual alarm ≤5W ) CABLE CONNECTION - ≤1000m,3(4) ×1.5 mm2 OUTPUT SIGNAL - 4~20 mA(Three wires) MODBUS / RS485 Alarm relays output in two levels(2A 30VDC ) Fault relay output 24VDC ...
Shenzhen Nuoan Environmental Safety Co.,Ltd
... Ex-proof audible and visual alarm ≤5W ) CABLE CONNECTION - ≤1000m,3(4) ×1.5 mm2 OUTPUT SIGNAL - 4~20 mA(Three wires) MODBUS / RS485 Alarm relays output in two levels(2A 30VDC ) Fault relay output 24VDC ...
Shenzhen Nuoan Environmental Safety Co.,Ltd
... Ex-proof audible and visual alarm ≤5W ) CABLE CONNECTION - ≤1000m,3(4) ×1.5 mm2 OUTPUT SIGNAL - 4~20 mA(Three wires) MODBUS / RS485 Alarm relays output in two levels(2A 30VDC ) Fault relay output 24VDC ...
Shenzhen Nuoan Environmental Safety Co.,Ltd
... metal wall-mounted cabinet or in a 19-inch rack fitted with a PLC controlling a network of CO-NO sensors. Available with Modbus or 4-20mA sensors, it is also available in a pneumatic version (renovation only). This ...
RAEGuard 2 PID is a fixed photoionisation detector (PID) that measures a broad range of volatile organic compounds (VOCs) Product Overview: RAEGuard 2 PID is a fixed photoionisation detector (PID) ...
RAE Systems
The IR400 Infrared (IR) Point Detector is a hydrocarbon gas detector that continuously monitors combustible gases and vapors within the lower explosive limit (LEL) and provides alarm indication. It features ...
MSA
The Remote Gas Detector is based on Tunable Diode Laser Absorption Spectroscopy (TDLAS). The detector emits a special wavelength laser to the gas and demodulates the laser signal passing through the gas. ...
Prosense "PQ" Series fixed gas detectors have been designed and developed for the demanding conditions of the industry in order to perform continuous measurement of combustible, toxic, asphyxiate, and VOC gases in the ...
Prosense Technology
... from all of ESP Safety’s gas detectors (SGOES, TGAES, and PGU). The vivid OLED display shows the type of gas, real-time concentration, and alarm levels. The detector comes in stainless steel housing. Configurable ...
... information is reported back either from dry contacts or from the RJ485 output to our MAXIBUS Universal or from the Modbus / API output. The Modbus / API output allows you to return information on your ...
Gas Detector electrochemical 6as Detector Unit available with either 1 or 2 electrochemical sensors, suitable for indoor and outdoor user. The GSE 410 and GSE 420 are BUS Units that are designed to detect ...
... IP65 Sample temperature -20 .. +50 °C Sample pressure max. ±3'000 Pa (±30 mbar) Interfaces RS232, Modbus, Profibus DP 0/4 .. 20 mA relay contacts Control unit Ambient environment Temperature ...
... ammonia nitrogen smart electrode with temperature, PH, and potassium ion compensation, using RS485 interface and standard Modbus protocol, with low power consumption, and supports solar power supply. It has the advantages ...
... oxygen and has no flow rate limit • The built-in temperature sensor automatically compensates for the temperature • Modbus RTU digital communication, anti-interference, greatly improving stability and accuracy
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining