- Hydraulics - Pneumatics >
- Pump >
- Water pump >
- NOV
NOV water pumps
Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
TZJ Slurry pumps, a new generation of “high efficiency, wear and corrosion resistance, no leakage” products especially for mineral processing application, are developed by the joint cooperation from Tsinghua University, ...
Flow: 112 m³/h - 10,800 m³/h
Head: 8.5 m - 140 m
... no leak inside the pump. Applying solid-liquid two-phase theory to the pump impellers to get the better efficiency. By using the liquid inside the pump to cool the ...
Flow: 90 m³/h - 8,000 m³/h
Head: 10 m - 50 m
Power: 2.5 ch - 13 ch
... building material and other industries. They can be used as Circulating Pump of FGD Absorbing Tower, Limestone Slurry Pump, Gypsum Slurry Pump, Waste Water Pump ...
Flow: 5, 2.7, 0.9, 2, 1.3 m³/h
Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: graphite braid NBR flange O-ring, Viton® ...
Pompes Japy
Flow: 2, 1.3, 2.7, 0.9 m³/h
Bare semi-rotary manual pumps Descriptive Construction materials Body, cover: bronze Inner mechanism: bronze Lever: bronze (brass as an option) Flange: bronze threaded oval ...
Pompes Japy
Flow: 1.3, 2.7 m³/h
Semi-rotary manual pumps Descriptive Construction materials Body, cover: bronze Mechanism: bronze Lever: cast iron (brass as an option -LL). Flange: PN 10 standard Waterproofing: ...
Pompes Japy
Flow: 10 m³/h
Pressure: 4 bar
... following industries: paint, dairy and beverage, meat and fish processing, pharmaceutical and cosmetics, waste water and water treatment, chemical and petrochemical industries, pulp and paper, textile, ...
Tapflo
Flow: 150 m³/h
Pressure: 15 bar
HIGH PRESSURE HOSE PUMPS The latest design PT pumps combine the best available materials with smart design solutions in order to maximise running time and minimise maintenance. The PT series pump ...
Tapflo
Flow: 0 m³/h - 15.6 m³/h
Head: 0 m - 16 m
Power: 1.1 kW
CTV 25-11 PLASTIC CTV 25-11 is a 1" vertical pump in PP or PVDF with 1.1 kW motor, capacity of 15.6 m3/h and max head of 16 m. Performance curve The performance curves are based on water at 20°C. Other ...
Tapflo
Flow: 1,500 m³/h
Head: 35 m
Power: 250 kW
... can be added to the main pump body to help break and mix sludge, and improve the suction concentration of the slurry pump. 4. The submersible dredging pump is easy to install and operate ...
Relong Tech
Flow: 600 m³/h - 1,000 m³/h
Head: 20 m - 65 m
Output diameter: 250, 200 mm
RLSDP dredge pump is a new type of sludge pump researched & manufactured by our company basing on International (Warman) Gravel Pumps, aiming at rivers and seas out of repair. RLDSP dredge ...
Relong Tech
Flow: 950 m³/h - 1,300 m³/h
Head: 20 m - 65 m
Output diameter: 250, 350, 300 mm
RLSDP dredge pump is a new type of sludge pump researched & manufactured by our company basing on International (Warman) Gravel Pumps, aiming at rivers and seas out of repair. RLDSP dredge ...
Relong Tech
Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m
... controlled by CM control module. - Multistage pump made of AISI 304 stainless steel. An inverter allows 4HS to: - Change pump speed to maintain set-pressure regardless of water ...
NASTEC
Flow: 0 m³/h - 18 m³/h
Pressure: 3 bar
Head: 2.5 m
SUND is the Nastec range of solar pumps for the circulation and filtering of pool water. It guarantees: Energy saving thanks to photovoltaic energy supply and variable-speed operation. Quick and ...
NASTEC
Flow: 0.5 m³/h - 8 m³/h
Head: 10 m - 60 m
Power: 800 W
... the pumped water. The flow rate is directly proportional to pump speed while the pres-sure supplied is kept almost constant. In this way, unlike a centrifugal pump, the helical rotor ...
NASTEC
Flow: 31 m³/h
Pressure: 8 bar
Head: 62 m
Wide range of pumps for domestic and industrial applications.
LOWARA
Flow: 0.3 l/min
Pressure: 3, 4 bar
Head: 30 mm
CMP30L,micro water pump,mini membrane pump,liquid micro pumps are well suited for transferring and evacuating neutral or corrosive liquid ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 0 l/min - 0.12 l/min
Pressure: 300 mbar - 4,000 mbar
Power: 10 W
CMP-18,miniature membrane pump,micro water pump,micro liquid pumps are well suited for transferring and evacuating neutral or corrosive liquid ...
ALLDOO Micropump | Micro Diaphragm Pumps
Flow: 0.03 l/min - 0.15 l/min
Pressure: 2, 1, 3 bar
Head: 17 mm
CMP-17L,micro liquid pump,micro diaphragm pump,water micro pumps are well suited for transferring and evacuating neutral or corrosive ...
ALLDOO Micropump | Micro Diaphragm Pumps
... When the rotor rotates liquid between rotor and stator will be forced to move from inlet to outlet. Then, the pur-pose of transporting liquid is achieved. Applications: 1﹒ Wastewater ...
Enfound enterprise co.,ltd
Close-coupled Centrifugal Pump for sea water and hot spring Spec Type:Other Key Features Features: 1. Pump casing and impeller are made of highly reinforced plastic. The shaft ...
Enfound enterprise co.,ltd
Flow: 36 m³/h
Pressure: 5 bar
Head: 25 m
Close-coupled Centrifugal Pump for sea water and hot spring Key Features Features: 1. Pump casing and impeller are made of highly reinforced plastic. The shaft is using SUS316 material. ...
Enfound enterprise co.,ltd
Flow: 20 l/min
Pressure: 0 bar - 1.1 bar
Power: 220 W
Electric pump CENTRI SP 30 -low-cost entry-level solution -low-wear centrifugal pump -electric motor 12 V, max. 20 A -version witn power pack for 230 V -self-priming as immersion pump ...
Flow: 20 l/min
Pressure: 0 bar - 1.1 bar
Power: 220 W
Submersible pump CENTRISP 30,12 VforAdBlue®, diesel, water and antifreeze fluid, set with cable, hose, dispensing nozzle Order-number: 10490 Details Submersible pump CENTRI SP 30, ...
Flow: 34 l/h - 336 l/h
Pressure: 238 bar
Weight: 15 kg - 38.2 kg
The Williams “W” Series Plunger Pumps offer a packed plunger design The Williams “W’ Series is a piston plunger pump with a mechanical seal. It is capable of precisely injecting chemical into a wide ...
... archimedean screw pump is suitable for the lifting of water and sludge in civil or industrial wastewater treatment plants. The main characteristics of its operation are the big flow clearance ...
Flow: 1,700 us gal/h - 8,000 us gal/h
Rule your dewatering! Backed by the Rule brand of DC pumps, a brand enjoying over 45 years of operational excellence, the Evacuator series is a new line of high efficiency portable utility pumps. Providing ...
RULE INDUSTRIES
Flow: 0 us gal/min - 178,000 us gal/min
Head: 0'00" ft - 152'00"
... to match application Applications Hayward Tyler Axial Mixed Flow Pumps are ideal for the following applications: Cooling Water Condenser Circulating Water Circulating Water
Hayward Tyler®
Flow: 0 us gal/min - 50,000 us gal/min
Head: 60 m - 210 m
... Turbine Pumps are ideal for the following applications: Containment Spray Cooling Water Emergency Service Water Essential Cooling Water Essential Service Water Essential ...
Hayward Tyler®
Flow: 0 us gal/min - 160,000 us gal/min
Head: 0 m - 500 m
... following applications: Cooling Water Fuel Pool Cooling Condensate Pump Reactor Building Spray Decay Heat Removal Cooling Tower Circulation Component Cooling Water Normal Component ...
Hayward Tyler®
Flow: 10 m³/h - 20,000 m³/h
Head: 3 m - 300 m
PRODUCT FEATURES Expect more with the improved design and above standard, standard materials options of the e-XC split-case pump: Xylem's proprietary mechanical seals - carbon/silicon carbide seal with an EPDM elastomer ...
Jabsco
Flow: 42 l/min - 129 l/min
Pressure: 500, 400, 320 bar
Power: 0 kW - 75 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 201, 167, 266, 221, 278 l/min
Pressure: 160, 210 bar
Power: 0 kW - 75 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 103 l/min - 163 l/min
Pressure: 365, 575, 465 bar
Power: 0 kW - 110 kW
HFA/HFC fluids Non-oily water/clear water Mine water Industrial water Descaling water Neutral fluids with a viscosity of 0.5 – 4.0 mm²/s
Hauhinco
Flow: 0 m³/h - 42 m³/h
Head: 0 m - 280 m
Power: 3, 4 kW
Multistage high pressure centrifugal pumps type ZHS are vertically mounted pumps. They are characterized by a minimum space requirement. Optionally, this series can be equipped with two or three pressure ...
SCHMALENBERGER GmbH + Co. KG
Flow: 0 m³/h - 0 m³/h
Head: 0 m - 38 m
Power: 3, 4 kW
... without costly and time-consuming chip crushers in conjunction with lifting systems. The SZcut combines a proven centrifugal pump design with a cutting element and optimises the difficult transport of aluminum chips in ...
SCHMALENBERGER GmbH + Co. KG
Flow: 0 m³/h - 60 m³/h
Head: 26 m
Power: 4, 3 kW
The Schmalenberger centrifugal pumps type S are single-stage inline block pumps without shaft bearing on the pump side. Important features are the maintenance-free mechanical seal arrangement ...
SCHMALENBERGER GmbH + Co. KG
Flow: 0.03 m³/h - 180 m³/h
Pressure: 24 bar
PCM Ecomoineau™ M is the most compact progressing cavity pump (PCP) available on the market today. Its revolutionary design combines the legendary performance and reliability of PCM PCP technology with ...
PCM
Flow: 0.003 m³/h - 300 m³/h
Pressure: 24 bar
... non-sticky fluids with high viscosity or low capacity to flow and requiring manual feeding or gravity fed pumps. Benefits of PCM EcoMoineau™ MVA - MVA FF - MSH cake pumps Product ...
PCM
Flow: 0 m³/h - 315 m³/h
Pressure: 12 bar
... Lagoa series of reciprocating pumps is designed for metering a wide variety of products, including minerals, paper and oil, across a range of industries. Lagoa reciprocating pump principle The Lagoa ...
PCM
Flow: 1,100 l/h
Head: 10 m
Power: 220 W
The SI 1850 pump is designed to evacuate heavy and contaminated condensates. Capable of evacuating up to 1100 l/h, the SI 1850 pump is suitable for air conditioning units and industrial refrigeration ...
Flow: 0 us gal/min - 4,000 us gal/min
Pressure: 0 psi - 175 psi
Head: 0'00" ft - 560'00"
The Series e-1510 base mounted end suction pumps deliver the highest efficiencies, performance and durability. All pumps feature stainless steel impellers and an expanded efficiency island for efficient ...
Bell & Gossett Domestic Pump
Flow: 0 us gal/min - 6 us gal/min
Pressure: 150 psi
Head: 0'00" ft - 12'00"
... Easy installation Small footprint Variable speed Many available options such as built-in thermostat, plug-in timer, plug/cord The energy-saving, shaft-free, high-performance, domestic hot water ...
Bell & Gossett Domestic Pump
Flow: 0 us gal/min - 2,300 us gal/min
Pressure: 175 psi
Head: 0'00" ft - 400'00"
... close-coupled, end suction pump with footless volute has been designed to offer the highest overall efficiencies in the market for HVAC and plumbing applications. With the largest “Efficiency Island” compared to other ...
Bell & Gossett Domestic Pump
Flow: 0 m³/h - 504 m³/h
Pressure: 6.5 bar
Head: 0 m - 65 m
MC series reliable and highly efficient pumps have been designed for pumping of municipal and industrial wastewater, raw water, storm water, sewage and sludges etc. A single channel closed ...
C.R.I. Pumps
Flow: 0 m³/h - 36 m³/h
Pressure: 0 bar - 2.5 bar
Head: 0 m - 25 m
... submersible sewage pumps are supplied with semi open single channel impeller for handling fibrous material without clogging. It can handle the solids upto 1½” in diameter. These pumps are suitable for ...
C.R.I. Pumps
Flow: 600 m³/h
Pressure: 16 bar
Power: 200 kW
... out, top centreline discharge type. These are offered with different material of construction to handle clear and slight raw water. Dynamically balanced impeller ensures vibration and noise free operation for long life. ...
C.R.I. Pumps
Flow: 0.02 us gal/h - 79.2 us gal/h
Pressure: 85 psi - 247 psi
Power: 62, 19, 110, 17 W
... mechanically-driven diaphragm pump to achieve a repeatability of ±1%. 70% Energy Savings Helical gears and return spring reduce power consumption by up to 70% compared to conventional mechanical diaphragm ...
Walchem
Flow: 0.3 us gal/h - 3.2 us gal/h
Pressure: 0.15 bar - 1.2 bar
Power: 15 W
... into the pump, enabling either proportional or On/Off control. • IP65 Equivalent Protection A robust housing protects the pump from normal wear. Mounting the Digital Display and Key Pad control within ...
Walchem
Flow: 4 us gal/h - 20 us gal/h
Pressure: 30 psi - 150 psi
Fluid temperature: 0 °C - 60 °C
... E-Series metering pumps. EHE Series pumps have outputs up to 20 GPH (75 l/h) and pressure capabilities to 150 PSI (10 bar). Combining the EHE performance with a turndown ratio of 1800:1 yields one of ...
Walchem
Flow: 15.9 l/min - 24 l/min
Pressure: 0 bar - 20 bar
Power: 0.1 kW - 0.8 kW
The pumps of the IOTA series, produce a flow from 19 to 24 l/min and operate at max. 20 bar pressure. They are generally driven by engines, electric and hydraulic motors. The pumps of this series ...
UDOR S.p.A.
Flow: 48.1 l/min - 71 l/min
Pressure: 0 bar - 20 bar
Power: 0.4 kW - 2.5 kW
The 3-diaphragms pump ZETA 70 produces a flow of 71 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic diaphragm pump ...
UDOR S.p.A.
Flow: 57.3 l/min - 85 l/min
Pressure: 0 bar - 20 bar
Power: 0.5 kW - 3.1 kW
The 3-diaphragms pump ZETA 85 produces a flow of 85 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic diaphragm pump ...
UDOR S.p.A.
Flow: 28 m³/min
Pressure: 2,100 Pa
Power: 3 kW
The SF6 gas pump mainly consists of pump shell, main shaft, impeller, motor and transmission, such as bearing. In detail, the motor shaft connects to the impeller directly with bearings on both ends. ...
ERG Technology
Pressure: 250, 500, 350 bar
Constant displacement pump with positive locking piston control Low noise level 600 - 1800 rpm speed range Incl. connection flange and screws
Flow: 1,600, 1,200 l/min
Pressure: 1.6 MPa
Head: 80, 85 m
The MTFO series is characterized by its wide power range of up to 22kW. The open impeller enables also applications with a solids content of up to 30%.
IWAKI Europe GmbH
Flow: 1 l/min - 80 l/min
Head: 28, 20 m
Power: 0.37 kW - 0.55 kW
The MMP series is characterized by the heat and pressure resistance. The bearing made of SIC-D supports the reliability and the freedom from maintenance. High and low temperature media can be transfered without any problems.
IWAKI Europe GmbH
Flow: 4 l/min - 79 l/min
Pressure: 1 MPa
Head: 50 m
... characteristics of the MEK series. The pumps are appliable in diverse applications with a variety of chemicals. The sealless, corrosion-resistant and leakage-free construction are special features of these pumps. ...
IWAKI Europe GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining