- Hydraulics - Pneumatics >
- Valve >
- Ball valve >
- Parker Fluid System Connectors Division Europe
Parker Fluid System Connectors Division Europe ball valves
DN: 10, 5.5 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of miniature ball valves with cast body, manually operated and with reduced dimensions. In line mounting they work to close or open the flow in both directions.
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.
DN: 25 mm - 1,200 mm
Pressure: 2.5 bar - 100 bar
Temperature: -45 °C - 200 °C
Di Nicola manufactures ball valves type floating and trunnion mounted alloy carbon steel ASTM 216 WCB / GP 240GH + N and stainless steel with high nickel content ranging in size and nominal pressures ...
DN: 50 mm - 1,600 mm
Pressure: 25 bar - 100 bar
Di Nicola manufactures safety turbine ball valves in carbon steel ASTM 216 WCB / N + GP 240GH, in fabricated EN S275J0 steel , in ASTM CF8 and CF8M cast stainless steel and fabricated Stainless steel ...
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
... 2-way ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material ...
DN: 10 mm - 50 mm
Pressure: 10, 16 bar
... • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality industrial valves • Flexible modular system with a wide range of variants • Reliable material combinations ...
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 100 °C
• BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • ...
DIVATEC,SL
DN: 15 mm - 50 mm
... spaces in the ball • PVC-U, PP-GF • Possibility of pneumatic actuator DA, NC or electric motor 230V / 24V Ball valve completely injected in one piece, very small dead space, high value ...
DIVATEC,SL
DN: 20 mm - 32 mm
Pressure: 63 psi
Temperature: -328 °F - 248 °F
CO2 for food / industrialapplications LAr for welding Cooling plants
Goetze KG Armaturen
DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C
Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...
DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C
... Pressure Control Valve provides regulated pressure to operate a variety of Williams pneumatic metering pumps. It features an economical pressure regulator capable of output pressures of 0-125 psi (0-862 Kpa). The Pressure ...
DN: 0.25 in - 1.5 in
DN: 0.25 in - 1.5 in
Pressure: 250 bar
Temperature: -10 °C - 80 °C
THROTTLE VALVE WITH FREE FLOW IN ONE DIRECTION DESCRIPTION The QTM7 valve is a one-way flow control valve with built-in non-return valve for reverse free flow, in ...
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
... PN16 flanges. Face to face according to EN 558 Series 14. SFF ball valves are not suitable for choking: open or closed position is possible only. Special execution [Series 02.111] with ball ...
DN: 100 mm
... production of fine chemicals, on the other hand, our ball valves are used within the production lines of the pharmaceutical industry or cosmetics industry. The precise end stops of the Böhmer multi-way ...
BÖHMER Kugelhähne, Werner Böhmer GmbH
DN: 450 mm - 1,400 mm
Pressure: 16 bar
Temperature: -180 °C - 650 °C
Ball valves are often subjected to extreme conditions, especially when used in pipelines. To withstand even the highest loads, Böhmer ball valves are therefore welded ...
BÖHMER Kugelhähne, Werner Böhmer GmbH
DN: 3 mm - 1,400 mm
Pressure: 10 bar - 800 bar
Temperature: 180 °C - 650 °C
Split body ball valves up to a nominal diameter of 56 inch are a integral component part of the Böhmer product line. Ball valves of this design are well suited for extremely ...
BÖHMER Kugelhähne, Werner Böhmer GmbH
DN: 10 mm - 100 mm
Pressure: 16 bar - 64 bar
... restrictions guaranteed High-precision Maximum versatility The VVS is a manual sanitary ball valve made by positioning a precision ball with hole inside the valve ...
BARDIANI VALVOLE S.p.a.
The PA intermittent blowdown valve is set to the open position using a lever. Here, the pressure pin forces the spring-loaded valve plug out of the valve seat, opening up a large cross ...
DN: 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
The SLT circuit switch allows to convey two pneumatic signals into one way, keeping the two pneumatic sources separated. They have aluminium body, NBR seals and brass components and are available with 1/8” and 1/4" ports. CONSTRUCTIVE ...
DN: 0.5, 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
UM series one way valves are used when there is the need to keep under pressure one tube, allowing, at the same time, the flow if air to one way.
DN: 0.5, 1, 0.125, 0.25 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
Quick exhaust valves SR are used to exhaust the pressure of the chambers of a pneumatic cylinder directly into the atmosphere, growing the speed of the cylinder to the maximum. They have the body and the components ...
Pressure: 0 psi - 5,500 psi
The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve ...
Generant
DN: 0.5, 0.75, 1 in
Pressure: 250 psi
Temperature: 400 °F
The Motorized Ball Valve delivers a torque of 150 in-lbs using a non-reversing motor, opening the valve in 5 seconds and minimizing pressure hammer. The motor is protected in a NEMA 4X ...
DN: 0.15 in - 1 in
Pressure: 10 bar
Temperature: 93 °C
Combines three valves in one: Isolation Valve, Check Valve and Companion Flange Free floating flange allows easy alignment and installation of pumps Prevents gravity circulation Isolates ...
DN: 0.75 in
Flow rate: 9 us gal/min
... hydronic systems utilizing zone valves Controls excess flow in the system when there is reduction in demand Available in ¾” connection All brass body with non-ferrous internals The differential bypass ...
DN: 2 in - 12 in
... direct mounting pad to ISO 5211 • 6” and larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves (Optional) • Antistatic grounding ...
HABONIM
DN: 2 in - 12 in
Pressure: 420 bar
Special mechanical design and construction Solid one-piece high torque durable stem. Tight stem-to-ball directional engagement, ensures relief hole alignment. Strict materials and manufacturing tolerances control. Efficient ...
HABONIM
DN: 0.25 in - 8 in
Pressure: 1,494 psi
... lower operating torque. Special mechanical design and construction Solid one-piece high torque durable stem. Tight stem-to-ball directional engagement, ensures relief hole alignment. Strict materials and manufacturing ...
HABONIM
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316
SOCLA
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M
SOCLA
DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible
SOCLA
DN: 3, 5.5 mm
Pressure: 20 bar
Temperature: -20 °C - 80 °C
2/2-way socket ball valve Micro brass design chromed with connection connector and male R-thread Producer Material of casing: Brass chromed Material of ball: Brass hard-chromium ...
Mader
DN: 15 mm - 76 mm
Temperature: -10 °C - 170 °C
2/2-way ball valve brass design nickel-plated in medium heavy design with female G-/R-thread Producer Material of casing: Brass nickel-plated Material of ball: Brass hard-chromium ...
Mader
DN: 10, 15, 20, 25 mm
Temperature: -20 °C - 150 °C
2/2-way ball valve brass design nickel-plated with butterfly handle with male thread Producer Function principle: 2/2-ways Actuation type: manually Material of casing: Brass nickel-plated Material ...
Mader
DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C
... Anfrage Contact travel 0°; 90° Surface burnished Material Steel housing, ball and operating shaft POM ball seal NBR O-ring
DN: 6 mm - 38 mm
Pressure: 400 bar
Temperature: -20 °C - 60 °C
... Temperaturmöglichkeiten auf Anfrage Contact travel 0°; 90° Material Stainless steel housing, ball and operating shaft POM ball seal NBR O-ring
DN: 6 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C
... 0°; 90° Surface nickel plated Material Brass housing Aluminium handle Brass ball, hard chrome-plated PTFE ball seal
DN: 0.375 in
Ball valve • Very suitable for quick shut-off valve (open-close) • Can be operated under maximum pressure • Connection: 3/8" NPT female (2x)
DN: 15 mm - 250 mm
Pressure: 16 bar - 40 bar
Temperature: -5 °C - 200 °C
The new KLINGER ball valve Monoball KHO is fully welded and generally used in the sector district heating, heating- and air conditioning and plant construction. The product is durable, functional, maintenance-free ...
KLINGER
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining