- Metrology - Laboratory >
- Metrology and Test Equipment >
- Industrial test bench >
- PC Progetti
PC Progetti industrial test benches
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... solution offering higher accuracy and dependability. The FGS-100Es is equipped with a 7 button key-pad and emergency halt switch which is designed for efficient use without prolonged training. Additionally, it consists ...
Nidec-SHIMPO
... tensile tests. Shimpo offers a variety of grips and fixtures to create the required set-up for your test parameters. The FGS-250W’s maximum 250 lbf (125 kgf) capacity combined with the precision wheel ...
Nidec-SHIMPO
Shimpo Instruments provide the FGS-50S Manual Hand-lever Force Test Stand, equipped with a modular and compact design for reducing footprint and weight. The tool is capable of obtaining proper and consistent results, ...
Nidec-SHIMPO
... allows tests on flanged valves, using proportional modulation of clamping effort. This prerogatives makes it compliant to the most widespread international test standards. A water vessel is installed ...
Think PC PROGETTI
Horizontal test rig with inner radial seal clamping style. The mobile reaction bridge is moved by two screwed columns that assure the complete absence of external forces on valve body. This prerogative ...
Think PC PROGETTI
Horizontal test rig with inner radial seal clamping style. The mobile reaction bridge is moved by two screwed columns that assure the complete absence of external forces on valve body. This prerogative ...
Think PC PROGETTI
... Eddy-Current induced on an aluminum disc directly mounted on the DUT (Device Under Test) shaft. Torque is measured frictionless by a Reaction Torque Sensor mounted under the test bench ...
MAGTROL
... With the ability to bring the motor under test (MUT) to synchronous RPM before beginning a test, repeatability is improved. Since the motor windings are at ambient temperature before starting a ramp ...
MAGTROL
... analyzer •M-TEST Software (or custom variations) •Motor power supply (AC and/or DC) for the motor under test (MUT) •Rack mounted computer, monitor and keyboard drawer •Dynamometer table or custom ...
MAGTROL
Vertical Motorized Test Stand EMX series is advanced type in capacity up to 1000N. This most rugged model is suitable for a variety of complex testing with its wide speed range, and digital setting ...
IMADA
Small Type Manual Test Stand FCA-50N Manual Test Stand FCA series is small type with 50N capacity. It realizes high repeatability by the fixed distance at budget ...
IMADA
Portable Type Manual Test Stand MS series Manual test stand MS series is portable type with 50N capacity. Its knob operation allows fine adjustment of a force gauge’s ...
IMADA
... equipment. Our expertise in static stress test bench systems is widely acknowledged, as several benches are used all around the world, by major industrial actors in the aerospace and ...
... independent tests on up to five (5) separate specimens using a single load frame. Based on our standard 68TM-30 testing frame (30 kN capacity)*, this system is especially suitable when test times are ...
... allows rapid removal prior to initiation of the test Effective Automatic Cutter Get accurate results when performing method A tests with our motorized cutter. Cutting time repeatability is within ...
The model TesT 105 is a very robust electromotive operated load frame that offers all well-proven qualities of TesT load frames at a remunerative price. By means of a digital potentiometer, reproducible ...
The motorized TCM Series force testers feature a small footprint while retaining ample clearance for large samples. With an ideal 100 mm (3.9 in) throat clearance, testing of large samples is no longer a limitation. The universal adapter ...
... dimensions, a wide range of tests can be performed, including break testing, cycling, limit testing to a load or distance, loadholding, elongation testing, tensile testing, compression testing, and more. Satisfy various ...
... furniture,ceramic present The usage Simulation Transportation Vibration Testing machine which simulates a transporation environment, is applicable to the vibration test of toys, electronics, furnitures, ...
... -the-art pressure pulsation test stands with media flow control and pressures up to 12 bar. The pressure pulsation rig is a flexible system and can be adapted to customers’ testing requirements. It covers tests ...
Poppe + Potthoff Maschinenbau GmbH
... tank system) additional burst pressure test: up to 500 bar additional leak test: up to 100 bar (long-term test) Frequency: 0.5 to 2.5 Hz (up to 10 Hz) Media temperature: RT up to ...
Poppe + Potthoff Maschinenbau GmbH
... Pulsation Test Stands up to 6,000 bar with Dual Chamber System including Burst Testing Pressure Cycle Test Bench | Impulse Test Stand | Automotive Testing ...
Poppe + Potthoff Maschinenbau GmbH
... directional drilling rig test bench is a special device for testing the performance and quality of the directional drilling rig. It usually consists of a rig mounting platform, testing instruments, and ...
HCTE PTE. LTD.
... Controls the test process, sets test conditions, and monitors and records test data in real time. 5. Data analysis software: Analyzes and processes the collected test ...
HCTE PTE. LTD.
Product introduction: The performance of precision reducers (RV/harmonic/planetary) is comprehensively designed in a modular and integrated manner. The operating part conforms to ergonomic design, and can complete manual/automatic mode ...
HCTE PTE. LTD.
... Thuringia) The interference-optical test device for applanation tonometers consists of an automated laser-optical test apparatus with USB interface and evaluation software for PC/laptop. Due to the ...
Single station machine for leak testing in water. Manual loading of the piece into the machine, cycle start by the operator. Automatic clamping closing, piece air inlet, piece descent into the water for visual check by ...
LOGITECH AUTOMAZIONE SRL
Three-station machine for pressure regulators tests. Leakage test check on three ways at a maximum of 10 bar, regulator pressure curve test. Manual loading of the regulators ...
LOGITECH AUTOMAZIONE SRL
Loading and unloading at the end of the cycle in automatic mode of the electric rotors from the conveyor line to the test bench. Rotor rotation, verification via triple camera system of all the connections ...
LOGITECH AUTOMAZIONE SRL
Hardened bench center MICROTECH for check run-out cylindrical and tapered parts. Can have ranges 300 500 1000 1500 and 2000mm (12 20 40 60 80 inches) Made form cast iron with surfaces finishing.Precision bench ...
MICROTECH
ELECTRICAL BURNER TEST APPARATUS Model : PolyNorme 503 The electrical burner test according to NF P 92-503 is the reaction to fire main test for M classification of building and ...
... inflammation during the main test (electrical burner test according to NF P 92-503 or radiation test in an epiradiator cabinet according to NF P 92-501). In that case, the flame persistency ...
... develops hoses test benches according to customer’s needs. First manufacturer of special vices to test seamless hoses during the production activity, up to DN50 1000 bar; plans and manufactures benches ...
Multi-coupling-system
Multi-Coupling System® plans and manufactures test benches for valves with reaction force from 50 TON up/to 3000 TON. Thanks to the use of its own high-pressure technology in the control consoles and to the experience ...
Multi-coupling-system
... develops hoses test benches according to customer’s needs. First manufacturer of special vices to test seamless hoses during the production activity, up to DN50 1000 bar; plans and manufactures benches ...
Multi-coupling-system
The Test Stand Stentor II is ideally designed to provide a good quality performance and functionality. It is built with a fully equipped force measurement unit which has a ready-to-be-used capability. ...
... designed to perform simple or complex tensile tests in quality and production laboratories. Driven by a computer, the test system allows the operator to program test sequences in several ...
... manual force bench with lever is designed for quick checking of cables and cable lugs. The test begins when the operator places the cable in the lower jaw and the terminal in the upper ...
... completely according to the standard design battery related testing, simulation, under the certain condition of the vibration test of battery, the battery or battery pack is fixed on the vibration table, according to ...
... windows for easy surveillance – water- proof lighting • Metal structure • Completely closed unit, locked during the test • Automatic test cycle by digital control panel allowing: • Quick filling to ...
... Technical specifications • Maximum pressure: 400 bar • Test cell 1000 x 500 x 150mm • 125L Tank • Pressure plug: 1/2 female • Protective cover with transparent part • During the test, opening ...
The motorized TCM Series force testers feature a small footprint while retaining ample clearance for large samples. With an ideal 100 mm (3.9 in) throat clearance, testing of large samples is no longer a limitation. The universal adapter ...
... M10 • - motor-driven height-adjustable frame construction for the electromotive pivoting unit; installation in existing test rig • - pivot frame with manually adjustable bracket for the specimen connection • ...
The VC25-SRV-FL5 is the new design high volume test bench for pressure relief valves meeting ASME NBIC, API RP 576. With the FL-serie we are moving towards a future model which is truly adapted to the ...
The Magnetic Particle Crack Detecting Machine DEUTROFLUX UWS is equipped with a moving coil, and thus it is particularly suitable for testing of long components. The mobile, motor-driven coil ensures high inspection ...
KARL DEUTSCH
Universal • Tensile Test • Compression Test • Bending Test • Hysteresis Test • Fatigue Test Ideal for testing applications in the medium and ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Test benches
- Test benches for the automotive industry
- Laboratory test benches
- Test benches for the aeronautical industry
- Research and development test benches
- Quality control test benches
- Test benches for the aerospace industry
- Workshop test benches
- Test benches for the electronics industry
- Test benches for dental applications
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining