{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Gap fill: 0.12 mm
Viscosity: 8, 1.7 Pa.s
... corrosion protection WRAS listed for contact with wholesome (potable) water Description Permabond® A1042 is a rapid curing adhesive designed to lock and seal metal parts that subsequently may need to be dismantled for maintenance. ...
Permabond
Gap fill: 0.25 mm
... circumferential bead; preferentially to the female component. Assemble with a twisting action. 2) For larger components use thixotropic products to prevent run off. 3) Take care to ensure adhesive ...
Permabond
Gap fill: 0.5 mm
... ). 2) For taper/parallel threads ensure adhesive is positioned where the threads will engage fully. Gaps and cure times may be greater than expected with this joint configuration. 3) Ensure sufficient adhesive is applied ...
Permabond
Gap fill: 0.5 mm
... required. It has excellent chemical and high temperature resistance or up to 200°C Surface Preparation Though the anaerobic adhesives will tolerate a slight degree of surface contamination, best results are obtained on clean, dry ...
Permabond
Gap fill: 0.1 mm
... low-viscosity, high-purity cyanoacrylate adhesive. It is ideal for use on hard-to-bond plastics and rubbers such as natural rubber, EPDM and butyl rubber. Cyanoacrylate adhesives are single component ...
Permabond
Gap fill: 0.5 mm
... for Use 1) Shake bottle before use. 2) Apply the adhesive sparingly to one surface. 3) Bring the components together quickly and correctly aligned. 4) Apply sufficient pressure to ensure the adhesive ...
Permabond
Gap fill: 0.15 mm
... frosting and fogging. Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface ...
Permabond
Gap fill: 0.25 mm
... oxide layer. Directions for Use 1) Apply the adhesive sparingly to one surface. 2) Bring the components together quickly and correctly aligned. 3) Apply sufficient pressure to ensure the adhesive ...
Permabond
Gap fill: 0.5 mm
... ceramics and wood. Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface initiates ...
Permabond
Working temperature: 120 °C
... oxide layer. Directions for Use 1) The adhesive should be dispensed from the cartridge via the nozzle supplied (this can be cut to give the appropriate sized bead to cover the bond area). 2) Apply the adhesive ...
Permabond