- Hydraulics - Pneumatics >
- Valve >
- Stainless steel valve >
- Pfeiffer Vacuum
Pfeiffer Vacuum stainless steel valves
DN: 6.35 mm
Pressure: 0 psi - 150 psi
DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C
... Ultraflon® conductive, UltraleneTM Disc materials: PFA, PFA conductive, Stainless steel, Hastelloy, Duplex, the full metal discs available mechanically polished Ra < 0.8, Stainless ...
InterApp AG
DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C
... Reducing Valve designed with Duplex Stainless Steel material providng more options for different industries. Pressure Reducing Valve protecting the system by reduce inlet ...
Elite Line Industrial Corp.
DN: 1.5 mm - 56 mm
Pressure: 0 psi - 142.2 psi
Temperature: -15 °C - 80 °C
... / BFF, The float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a specified water level is reached, ...
Elite Line Industrial Corp.
DN: 1.5 in - 56 in
Pressure: 0.3 psi - 8 psi
Temperature: -15 °C - 80 °C
... Presssure Sustaining Valve, also known as Back Pressure Valve, or Back Pressure Sustaining Valve, is a valve that maintain required pressure of inlet port by opening ...
Elite Line Industrial Corp.
DN: 100 mm - 455 mm
... Vortex® Iris Valve opens from and closes toward the center of its opening to create a gradual flow or restriction of materials. This design ensures an even discharge of materials and allows manual control over flow rates. ...
DN: 150 mm - 610 mm
Temperature: 80 °C
... Flange Options Standard flange Custom flanges are available Material Contact Options Carbon steel, 304 stainless steel, 235 BHN abrasion-resistant steel, SAE 660 bronze
DN: 50 mm - 255 mm
Temperature: 80 °C
... Silicone rubber Drive/Actuation Double-acting air cylinder Cylinder Construction Aluminum Cylinder Shaft, Barrel Nuts & Tie Rod Construction 303 stainless steel Position ...
DN: 25 mm - 300 mm
Pressure: 16, 10, 6 bar
Temperature: -10 °C - 120 °C
... Pressure 2.5 to 8 bar (Based on 5.5 bar air supply as standard) Body Aluminum alloy Ambient Temp -15 to 8 oC (Low and high temp versions also available) 0 Springs Stainless Steel Cycle ...
pneumaticairactuator.com
DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C
304 SS Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical ...
pneumaticairactuator.com
DN: 25 mm - 300 mm
Pressure: 2 bar - 8 bar
Temperature: -50 °C - 120 °C
... Butterfly Valve Air Operated For Marine Industry Structure - rack and pinion rotary actuator Surface Treatment - hard anodizing Low Temperature: -40ºC(-104°F) ~ 80ºC (+176°F). Connection - NAMUR, ISO5211, and ...
pneumaticairactuator.com
Type Filter Pressure Reducers Certifications Atex, EAC, PED Body material Aluminium, Stainless Steel AISI 316 series Port connection 1/4" ÷ 1 1/2" Applications Water treatment, Oil & Gas, Paint systems, ...
ODE
Type Pressure Reducers Certifications Atex, EAC, PED Body material Stainless Steel AISI 316 series Port connection 3/4" ÷ 1 1/2" Applications Packaging, Water treatment, Automotive, Chemical/Petrochemical
ODE
Type Pressure Reducers Certifications Atex, EAC, PED Body material Brass, Stainless Steel AISI 316 series Port connection 1/4" ÷ 3/8" Applications Packaging, Water treatment, Automotive, Chemical/Petrochemical
ODE
DN: 0.5 in - 40 in
... Temperature Trunnion Ball Valve Fabricator: Metal-Seated Trunnion Mounted Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. High Temperature Trunnion Ball Valve Cast ...
China MED Valve Co., Ltd.
DN: 2 in - 48 in
Through Conduit Gate valve Manufacturer: Full Port Slab Through Conduit Gate Valves, Resilient or Metal Seat, API 6D, API 6A, OS&Y, 2-48 Inch, Class 150-2500 LB. Med Slab Through Conduit ...
China MED Valve Co., Ltd.
DN: 15 mm - 600 mm
Pressure: 16 bar - 420 bar
Temperature: -29 °C - 560 °C
DIN GS-C2 Angle Globe Valve Fabricator: DIN 3356 Globe Valves, DIN GS-C2, 4 Inch, DN100, Class 300 LB, PN50, Flanged RF Ends, Test EN 12266-1/2. Design standard: DIN 3356. Body material: GS-C25. End ...
China MED Valve Co., Ltd.
DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C
Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.
DN: 0.125 in - 1 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
Series of quick exhaust valves in nickel-plated brass and in stainless steel
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
Di Nicola manufactures rising and non rising stem cast steel valves in carbon steel ASTM 216 WCB/GP 240GH+N and stainless steel with high nickel alloys ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C
The NV-30 series is a precision adjustable flow control used in pneumatic and fluidic systems. 303 Stainless Steel construction provides excellent corrosion resistance. Flow control needle has 7 to 8 ...
DN: 2 mm - 32 mm
Temperature: -196 °C - 550 °C
... features Consisting of ball valve and actuator Steel or stainless steel ball valve Corrosion-resistant materials to withstand corrosive process media DIN ...
Pfeiffer Chemie-Armaturenbau GmbH
DN: 2 mm - 16 mm
Temperature: -35 °C - 200 °C
Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...
Pfeiffer Chemie-Armaturenbau GmbH
DN: 2 mm - 48 mm
Temperature: -23 °C - 125 °C
Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...
Pfeiffer Chemie-Armaturenbau GmbH
DN: 0.5, 0.75 in
Pressure: 20.7 bar
Temperature: 149 °C
The HAT/FP is a reliable and automatic freeze protection valve designed to protect water resupply lines from freezing. This thermostatic valve controls flow based on temperature variations to prevent ...
Thermomegatech
DN: 0.5, 0.75 in
Pressure: 10.3, 6.9 bar
Temperature: 149 °C
... Protection Valve is installed into the lowest point within the heated system. The thermal actuator is tee’d into the NPT threaded opening with adequate internal clearance to monitor the water temperature. When the water ...
Thermomegatech
DN: 0.5 in
Pressure: 20.7 bar
Temperature: 149 °C
... actuated trap) valve. This thermostatic actuator senses the fluid temperature and will modulate the valve open to initiate flow if the temperature falls below the valve’s set point. Once ...
Thermomegatech
Pressure: 207 bar
Temperature: 121 °C
... The valve automatically opens as the element cools. Benefits The valve is automatic, with no reset or operator involvement required Features corrosion-resistent stainless steel ...
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment ...
DN: 40 mm - 300 mm
Pressure: 10 bar
Temperature: 150 °C
Cast iron (GJL 250) PN 10 gate valve flat body OS&y; stainless steel (AISI 304) trim 150°C (max)
DN: 50 mm - 600 mm
• DIN or ANSI flange connections • Robust, stainless steel shaft 304 • Manufactured in PVC-U body. PP / PP-GF • Gaskets in EPDM or FPM • Possibility of electric motor or pneumatic actuator DA, NA, ...
DIVATEC,SL
DN: 50 mm - 400 mm
Pressure: 6, 10 bar
• Robust with stainless steel shaft. AISI 304 with double seal PTFE or AISI316 • Joints in EPDM or FPM • PVC-U, PP and PVDF materials • Actuation by manual lever or reducer steering wheel • Possibility ...
DIVATEC,SL
DN: 50 mm - 600 mm
Pressure: 6, 5 bar
• Robust with stainless steel shaft. AISI 304 with double PTFE or AISI 316 seal • Gaskets in EPDM or FPM • Materials PVC-U, PP and PVDF • Actuation by manual lever or reducer steering wheel • Possibility ...
DIVATEC,SL
DN: 10 mm - 50 mm
Pressure: 63 psi
Temperature: -328 °F - 392 °F
The main function of the 2140 shut-off valve is the controlled opening and closing of pipeline sections via the valve seat integrated in the body. Due to the use of high-quality materials, the fitting ...
Goetze KG Armaturen
Stainless steel butterfly valve, material: S.S.304,S.S.316. We can offer this stainless steel butterfly valve according with SMS, DIN, ...
DN: 25 mm - 300 mm
Dueker gate valves – for water and gas.Sophisticated technology. Fully-fledged gate valves. Dueker service connection valves are essentially the same as gate valves ...
DN: 0.375 in
Pressure: 200 bar
Flow rate: 20 l/min
FR1-06-KD is an accurately regulating flow restrictor with an integrated non-return valve. It is made of stainless steel W.St.1.4301 and designed for both oil and water hydraulics. Suited ...
DN: 10 mm - 50 mm
Pressure: 16 bar
DN: 4 mm - 6 mm
Pressure: 315 bar
needle valve, both sides cutting ring connection, light duty series, material: 1.4571
Pressure: 3,000 psi
... flat face, the valve is easy to mount to a control panel, cabinet / enclosure or actuator. The major benefits of using four panel mount holes instead of one single nut type are that this design eliminates the possibility ...
Alco
DN: 8 mm - 20 mm
Pressure: 160, 100 bar
Temperature: -50 °C - 225 °C
INTEC K110 Mini plant ball valve with female threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to DIN 3202 part 4-M3 ...
KLINGER-SCHÖNEBERG GmbH
DN: 8 mm - 20 mm
Pressure: 100, 160 bar
Temperature: -50 °C - 225 °C
INTEC K120 Mini plant ball valve with male threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to producers standard ...
KLINGER-SCHÖNEBERG GmbH
DN: 15 mm - 200 mm
Pressure: 16, 40 bar
Temperature: -29 °C - 225 °C
INTEC K200 Flanged ball valve, floating ball, soft seated. Features nominal sizes DN 15 - DN 200 nominal sizes NPS 1/2" - NPS 8" two-piece split body soft seated floating ball FTF dimensions ...
KLINGER-SCHÖNEBERG GmbH
... lockup valve is open and allows the free flow of compressed air from the positioner to the pneumatic actuator. When the lockup valve loses its signal (or it drops below an adjustable set point), the lockup ...
DN: 15 mm - 50 mm
... DN40, DN50 material specifications housing, not in contact with medium: stainless steel 1.4435 / 1.4404 Tri-Clamp: stainless steel 1.4435 / 1.4404 screws: stainless ...
Ho-matic
DN: 10 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 25 °C
... many different applications requiring ample product passage. Available in versions with a plastic 5-position handle, stainless steel 4-position handle or with a millimetric regulation handle for precision ...
BARDIANI VALVOLE S.p.a.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining