- Electricity - Electronics >
- Cable, Connector, Enclosure >
- Connector >
- Phoenix Contact
Phoenix Contact connectors
Impedance: 0 Ohm - 4 Ohm
Primary current: 10, 16 A
Voltage: 24, 115, 230 V
Series of connectors in different sizes for coils. In the standard version they are provided with fixing screw and NBR profiled seal. Yellow LED as standard in the provided versions. Cabled versions available. ATEX ...
Hohner Automáticos have a wide range of female and male connectors: DIN 43650-4p, Military-7p, Military-10p, M12-8p, M23-12p, M23-16p, SUB-D-9p, etc.
Accessories for our sensor program. 3-pole connector plug AMP/TYCO SuperSeal 1.5, made of extremly durable ABS plastic.
RJ45 socket EROUND series General features Protection degree: IP67 Ring: Satin chrome Front connection: RJ45 integrated female socket Back connection: RJ45 integrated female socket
Pizzato Elettrica
... connected to spectrophotometers in two different ways. If the spectrophotometer has SMA sockets, an immersion probe with SMA connectors can be directly connected. For this purpose, fiber optic cables with SMA Collimator ...
Primary current: 3 A
Voltage: 60, 30 V
Operating temperature: -55 °C - 125 °C
... battery pack is required. Because they can be used as either compression or sliding Modular Contacts, they can function as connectors for many other non-battery related applications. Conflict Mineral Source Reporting ...
Klein exclusive Pass-Thru™ Connectors provide fast, reliable connector installations for data applications CAT5e Cable easily passes through connector to visually ensure that wires ...
Male power connector, Contacts: 3+PE, unshielded, solder, IP65 with seal (accessories), UL, ESTI+, VDE, with flat seal NBR beige Technical specifications Connector design: Male power connector ...
MC Technologies GmbH
26 Pin flat cable (cable length 3m). Simple electric wire system. Max. operating frequency: 5Hz.Remark Don't continuous energizing for about 2 hours or more. The total energizing time of a day don't exceeds the total non-energizing ...
Primary current: 2 A
Voltage: 300 V
Features A wide variety of DIN connectors that conform to UL/CSA standards -preserves the characteristics of normal DIN connectors while increasing the number of terminals available (DIN-style mates with ...
OMRON Electrical Components
To connect two regulators with a unique CO2 cylinder and save space on your line.
Oxyturbo also offers a range of tools for tank and kegs like high quality. Base made of inox 90 x 90 mm. These panels have to be wall mounted and are designed for the high pressure connections. Available with two or three connections.
Operating temperature: -25 °C - 200 °C
Plug-in connector for couplings I.D. 2.7, Stainless steel 1.4305, Sleeve I.D. 3, Operating pressure 0-35 bar,
Voltage: 11, 13.2, 15, 20 kV
... feeders. •Frequency range: 1-32 MHz •Accuracy: ±1 º for the defined temperature range •Insertion: type C symmetrical T connector •Transformation ratio: 10,000:1 •Protection level in primary area: IP65 •Primary ...
... Soldered battery Zone: Sigfox: RC1 LoRaWAN®: EU863-870 Standards: Directive 2014/53/EU (RED) BINDER CONNECTOR IP67 Female-angled connector DIN 6 pins UL certification ATEX Specifications ATEX ...
Power (DIN) connectors are available in FORM A & B (square and rectangle), with or without a moulded power cord. Special adapters, to take connection from FORM B to FORM A, are also available. FEATURES Optionally available ...
The bus connector EasyConn PB is used for the connection of PROFIBUS participants to the bus line. The fully visible diagnostic LEDs facilitate the installation considerably. Users can immediately check the status of ...
Ideal for wide-ranging electrical connections, including signals, ground and antennas
ALPS Electric
Primary current: 250 A
Voltage: 12 kV - 24 kV
... cable connector is used for XLPE insulted 1-core or 3-core cables with A1 or Cu conductor for 12-24 kV. Fit standard bushing of outer cone type A according to EN50181. Standard • GB/T12706.4 • IEC 60502.4 Features • ...
Voltage: 50 V
Operating temperature: -40 °C - 125 °C
•Suitable for automotive applications that require vibration and heat resistance (125℃) characteristics. •“Anti-misoperation bridge structure” prevents unintended operation of mating lock. •FPCs and boards can be directly connected ...
Matsushita Electric Works
... for material and machine-specific batch systems The hopper connector is used together with suction nozzles as discharge unit for product stored in the silo or hoppers. The hopper connector is flanged ...
High-quality accessories Developed for our products Aligned to our products Originals from the manufacturer IP65 socket devices or IP54 rubber protective caps for increased protection Simple installation with plug-in ...
SUCO Robert Scheuffele GmbH & Co. KG
Achieved overwhelmingly low cost and high quality at the same time. ・ M12 circular connector with excellent environmental resistance and easy connection. ・ M12A coding for sensor connection. Can be used in 2-wire, ...
Cable connectors are used for cable extension between idOil control unit and idOil sensors. They are oil resistant, IP68 and suitable for ATEX Zone 0. Simple apparatus according to IEC/EN 60079-11. LCJ1-1 cable connector ...
Labkotec Oy
DG10070 H2 - QUICK CONNECTOR FOR FUEL CELL STACK DAM Group has developed its own quick connector DG10070, able to adapting to the maximum number of stacks on the market. It is designed for air supply ...
Primary current: 6 A
Voltage: 250, 320, 630 V
Compact Design Connecting Point for a Jumper Solder-free PCB - Contacting Connector for Interchangeable Components such as Small Relays
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining