- Environment - Health - Safety >
- Air Treatment and Noise Management >
- Fan >
- PLYMOVENT
PLYMOVENT fans
Air flow: 0 m³/h - 0.7 m³/h
Noise level: 50 dB
Effective Improvement for Air Environment Simply installing it at the edge of the display case to efficiently improve air quality. It is unnecessary to move exhibits when installing it and to open the display case for ventilation after ...
These fans enable heating of hot chambers with steam. Produced from AISI 304 grade materials.
These fans enable heating of hot chambers with steam. Produced from AISI 304 grade materials. Capacity Options: 5000, 10000, 20000, 30000 LT/H
Air flow: 100 m³/h - 700,000 m³/h
I.VA.CO. fans division consists of a team of qualified technicians with wide and relevant experience, who are able to design special industrial fans by using the most updated technologies. Heavy industrial ...
Ivaco
Air flow: 0 l/s - 100 l/s
This explosion-proof ExVENT electric motor is used to power: Fans for ventilation or better temperature distribution in heated analyzer cabinets to increase the heat exchange performance of heating or cooling systems. Pumps ...
Air flow: 0 m³/h - 177 m³/h
... At the same time, the fan itself remains clean and thus operable for a long time. Like the ExVENT motor, the filter ventilator is explosion-proof. The FL-ExVENT is equipped with a temperature limiter, which separates ...
Air flow: 0 m³/h - 50 m³/h
If flammable gases or liquids can be released inside a housing, a technical ventilation system must dilute them with clean air to such an extent that the lower explosion limit is not exceeded. However, if there are large temperature differences ...
Air flow: 15 l/min - 45 l/min
Rotational speed: 2,300 rpm
The VF80 Ventilating Fans are designed for ventilating large spaces such as vaults. Designed for heavy duty service Quiet operation Centrifugal blower to deliver large volume of air High impact plastic ...
NMB axial fans are available in sizes ranging from 60 to 150 millimeters. The fans are ideally suited for all harsh environments, having no difficulty withstanding sunlight and moisture. The motor is ...
MinebeaMitsumi Technology Center Europe GmbH
Diameter: 711 mm - 813 mm
Visctronic Fan Drives utilize BorgWarner’s proven viscous technology with precise electronic control. The fan drive is controlled by the engine’s control module for precise fan speed ...
Air flow: 2,000 m³/h - 6,000 m³/h
... the large fan wheel. The major advantages of the SPF are very low dust formation and in-line flexibility, with a left-hand or right-hand version and various different outlet directions. The SPF fan is ...
Air flow: 13,000, 16,000, 23,000, 30,000 m³/h
... steel cylinder and larger separation section. The Varifan air volume adjustment ensures optimal conditions. Cimbria ACG axial fans are also available for applications that do not require dust separation. • Promotes ...
Air flow: 468 m³/h - 2,390 m³/h
... extraction. Designed and produced in Italy; characterized by steel sheet housings and finned lower base; high-head centrifugal-fans generated flow; more than 40.000h reliability; terminal box connection; polyurethane ...
Air flow: 2,300 m³/h - 115,000 m³/h
Diameter: 310 mm - 1,600 mm
Rotational speed: 750, 1,500, 1,000 rpm
Smoke extraction in case of fire, 300/400°c for 120 minutes. • Smoke extraction • Pressurization • Industrial ventilation & explosion-proof application Multiple european laboratories, BSI KITEMARK, APPLUS. ADVANTAGES DUCT- ...
Air flow: 4,400 m³/h - 15,000 m³/h
... to 30%. DS is realised with a robust, galvanised, powder-coated steel supporting structure, equipped with a high-capacity fan capable of guaranteeing more than efficient air recirculation, positioned behind a special ...
Ventilators Essential machine for the pneumatic conveying, product conditioning and dust extraction, the ventilators supplied by Sangati Berga are projected according to the calculus methodology proven worldwide. Gathering over 50 ...
The exhaust fan is an indispensable machine which carries the grape stalks that come out of the grape-destalker to the place in which they will be gathered. These models are entirely in stainless-steel and it is possible ...
Air flow: 750 m³/h - 150,000 m³/h
Diameter: 165 mm - 1,700 mm
Rotational speed: 3,000, 1,500, 1,000 rpm
... range of ENAG fans has been designed especially for the marine environment. With more than 30 years’ experience in fan design and manufacture, efficiency and reliability are assured. Advantages Designed ...
Air flow: 900 m³/h - 4,500 m³/h
Rotational speed: 1,200 rpm - 1,460 rpm
Noise level: 55 dB - 72 dB
Explosion Proof Certified Axial fans to extract air and fumes directly outside through short ducting, wall or panel mounting.
Siccis
Air flow: 1,900 m³/h - 3,200 m³/h
Efficient cooling Ventilators delivery energy savings – in fact, the continuous-flow machines in our portfolio offer up to 30% higher efficiency than conventional AC motors. Soft-start devices reduce the start-up current. Our flexible, ...
Elektrosil GmbH
Air flow: 3,000 m³/h
Air flow: 1,400 m³/h - 6,300 m³/h
UVO H EC is the group of roof fans with horizontal air outlet. They are designed for ventilation of public and industrial buildings. Their main function is to remove stale air from the room. Combined with LEO and KM ...
... GKseries high temperature high humidity axial ventilator fan is widely used in drying kiln, painting workshop, warehous, basement. etc.The axial fan is novelty structure and high performance. The fan ...
Air flow: 1.63, 2.45 m³/s
... coating to any RAL colour. All fans are manufactured to the ISO 9001 quality standard. Low maintenance – With the additional advantage that there is no ductwork to clean. High thrust – With a higher thrust, each ...
Colt International Ltd
Single-piece, glass-reinforced polyamide fan with blade geometry derived from our long experience as a market leader in radiator and engine cooling for off-road applications. Ranges from 12 inches (305 mm) to 39 inches (1000 mm).
Air flow: 2,000 m³/h
Diameter: 100, 150, 160 mm
Noise level: 68 dB
- Mobile suction fan for aeration and ventilation - Large amounts of smoke/dust - Continuous use FEATURES - Portable and mobile - Exhaust air hoses of Ø 100 mm, Ø 150 mm, Ø 160 mm can be connected TECHNICAL ...
Air flow: 17.9, 22.6, 27, 31.6, 13.3 m³/h
Rotational speed: 6,000, 8,000, 10,000, 12,000, 14,000 rpm
Noise level: 48, 29, 36, 40 dB
Material : Impeller& Frame Plastic(UL94V-0) Lead Wires :UL 1007 AWG#26 or Equivalent Impeller : 7 Blades Rotational direction CCW view from impeller side Mass:24g
NINGBO SHENGJIU CABINETS LOCK
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining