Fans

Rotational speed: 2,800 rpm
Noise level: 10 dB

Don't give hearing damage a chance! The Sound Absorbing Fan (SAF) reduces noise by more than 10 dB, reducing the risk of hearing damage. The exhaust fans from the SAF series are equipped with sound insulation ...

Air flow: 3,000 m³/h - 22,000 m³/h
Rotational speed: 2,900 rpm

... by frequency inverter The SIF is a central fan with an insulated case made for general filtration- and welding fume extraction systems The SIF ventilation fans are designed for use as central fans. ...

Air flow: 2,400 m³/h
Diameter: 200, 160 mm
Rotational speed: 2,800, 3,400 rpm

... the UltraFlex, Flex, T-Flex extraction arms FAN-28 is a wall-mounted extraction fan FAN-28 is especially designed to fit the large diameter (200mm) arms in our extraction arm program. ...

Air flow: 500 m³/h - 1,870 m³/h
Noise level: 52 dB - 63 dB

... radial fans on KryosROOF provide high flow rates and heads to ensure the correct airflow within the cabinet. In addition, there is a high efficiency version with EC fans and an active control probe, ...

Air flow: 0 m³/s - 23 m³/s

Filter fan FPI size 1 (92 x 92 mm) for air conditioning enclosures and casings. Configuration: FPI - airflow direction "in" (standard version: blowing). Optimum air conditioning for your enclosure: The Filter Fan ...

Air flow: 0 m³/h - 32 m³/h

Filter fan FPO size 1 (92 x 92 mm) for air conditioning enclosures and casings. Configuration: FPO - airflow direction "in" (design: intaking). Optimum filter fan for enclosures: The Filter Fan ...

Air flow: 0 m³/h - 33 m³/h

Filter fan FPO size 1 (92 x 92 mm) for air conditioning enclosures and casings. Configuration: FPO - airflow direction "in" (design: intaking). Optimum filter fan for enclosures: The Filter Fan ...

Bomaksan branded BAF model fans are specially designed to work with extraction arms. Bomaksan BAF series fans are preferred thanks to their high suction power and their ability to serve for a long time ...

... type of fan in which air or gas enters axially and exits radially with the direction of the blades is called RADIAL VENTILATOR. Belt and pulley driven fans drive the rotor by means of a mechanical ...

Air flow: 1,000 m³/h - 35,000 m³/h

The Extractair® is a centrifugal fan that allows the evacuation of polluted air to the workstations. Installed on the roof and connected to piping networks, it is used to: - Cleaning and air renewal; - Cooling ...

Air flow: 1,000 m³/h - 35,000 m³/h

... of hot environments, - acceleration of drying and evaporation, - extraction of vapours and steams. The Nylair® fans are axial fans covering a wide flow range (1000 to 35000 m3/h). They of course, ...

Air flow: 5,800 m³/h - 7,200 m³/h

The Projectair® fan is a mobile helical fan. Wherever moving air improves working or production conditions, it can provide a solution adapted to: - Cleaning and air renewal; - Cooling of hot locations; - ...

Diameter: 1.5, 2, 2.5, 3 m
Rotational speed: 180, 130, 95, 70 rpm
Noise level: 35 dB

SUNON HVLS Fan has a lighter and stylish look. The airfoil combines aircraft-grade aluminum with a patented winglet design, it reduces the wind resistance and wind noise. Suitable for users who don’t have high ceilings, ...

Diameter: 4, 5, 5.5, 6.1, 7.3 m
Rotational speed: 115, 90, 65, 60, 50 rpm
Noise level: 50, 46 dB

Different from most large industrial ceiling fans on the market that rely on rapid turning speeds to generate unsteady and uneven airflows, Powerful HVLS Fan series 10 large industrial ceiling fans ...

Diameter: 4.2, 3.6, 3, 2.5 m
Rotational speed: 56, 70, 100, 150 rpm
Noise level: 40 dB

Powerful HVLS Fan series 3 is suitable for cooling a large space, it reduces body temperature efficiently and heat dissipation evenly. The high-efficiency BLDC direct-drive motor shows remarkable results and does not ...

Air flow: 200 m³/h - 750 m³/h
Diameter: 108 mm - 200 mm

ECOFIT Single inlet centrifugal fans AC single phase motor Forward impeller galvanized steel or plastic, Impeller diameter of 108 up to 200mm, AC single phase capacitor external rotor motor 230V50/60Hz and 120V50/60Hz, Plastic, ...

Air flow: 400 m³/h - 1,100 m³/h
Diameter: 120 mm - 180 mm

ECOFIT Double inlet centrifugal fans AC single phase motor Forward impeller galvanized steel, Impeller diameter of 120 up to 180mm, AC single phase capacitor external rotor motor 230V50/60Hz and 120V50/60Hz, Black ...

Air flow: 310 m³/h - 2,700 m³/h
Diameter: 170 mm - 400 mm

ECOFIT axial fans AC single phase and three phase motor Plastic and black painted steel propeller, air direction “A” or “V”, Propeller diameter of 170 up to 400mm, AC single phase capacitor external rotor motor ...

Air flow: 0 m³/h - 1,000 m³/h

Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due to the cast silumin ...

Air flow: 0 m³/h - 3,000 m³/h

Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due to the cast silumin ...

Air flow: 2,000 m³/h - 4,000 m³/h

Central fans are the ideal solution when large amounts of air need to be moved. They are put to use in combination with duct on welding fume extraction tables, hoods and arms. Fans are used everywhere ...

NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the raw gas side, it blows into the filter system and is referred to as an overpressure ...

NESTRO transport fans transport the material to be filtered, e.g. in long pipelines or in the event of high volume flow requirements. They support/relieve the burden on the extraction fans.

NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the clean gas side, it sucks air through the filter system and is referred to as a vacuum ...

Air flow: 15,000 m³/h
Rotational speed: 2,755 rpm - 2,950 rpm
Noise level: 70 dB - 94 dB

FUMEX FBE – an energy-efficient fan designed for industrial environments which can be installed both indoors and outdoors. For expelling non-explosive gases, fumes and lighter particles with an airflow of up to 15000 ...

Air flow: 6,600 m³/h
Rotational speed: 2,890 rpm - 2,940 rpm

Radial fan for high concentrations of dust-laden air FUMEX FTE is a range of radial fans for use at high concentrations of dust-laden air. Fan housings and impellers are made from heavy-duty ...

Air flow: 600 m³/h
Rotational speed: 2,800 rpm

Centrifugal fan for smaller applications FUMEX C 600 – a compact and sturdy fan which can be installed both indoors and outdoors, designed for industrial environments. The forward-curved impeller ...

Air flow: 0 m³/s - 198.218 m³/s

... EFFICIENCY WITH THE REVOLUTION HVLS FAN The Révolution® is Rite-Hite’s original Hiah Volume. Low Speed (HVLS) Fan and today’s standard for low cost, high-efficiency climate control, delivering the most ...

Designed for manual parcel loading and unloading CoolMan 2800 Trailer Fan swivels on unique bracketing to service two loading dock openings Easy vertical or horizontal adjustment using T-style handle for full access ...

Circulation Fans with Steel Blades & Galvanized Housing Our circulation fans provide uniform temperature throughout your tunnel, greenhouse or commercial warehouse. With our circulation fans ...

Air flow: 20,000, 30,000 m³/h
Diameter: 1,340 mm
Rotational speed: 750, 730 rpm

X-Fans are particularly addressed to cow barns and industrial plants and allow very high energy savings thanks to the low energy consumption. The system is the perfect choice to provide ventilation and to enlower heat ...

Air flow: 10,102 m³/h - 77,340 m³/h
Diameter: 26 in - 69 in
Noise level: 62 dB - 74 dB

Exhaust Fans with Steel blades & Galvanized Housing Move and refresh the stagnant air in your tunnel, greenhouse or commercial warehouse to create a healthy and more productive environment. Our exhaust fans ...

Air flow: 2,000 m³/h

•High power thanks to the possibility given by hydraulic motors to give a high speed to the fan •Hydraulic motor has no exhaust so can be placed directly in closed ambient •Absence of electricity makes it implicitly ...

Air flow: 2,100 m³/h

•Can be power by common home electric sockets or from small generators •Electric motor has no exhaust so can be placed directly in closed ambient •Quiet, no vibration, minimal maintenance need • Can be used in many positions or in ...

Air flow: 2,100 m³/h

... inlets in just a few moments and without the need for tools thanks to the exclusive quick eyelet system •The volute and the air fan can be washed without problems Practical centrifugal ventilator/aspirator with gasoline ...

Air flow: 120 l/min
Diameter: 24 mm
Rotational speed: 26,000 rpm

Tube fan with high airflow, economic motor and integrated power electronic. Compared to a flat fan, the Micronel D-Line offers much higher pressure and still high volume flow at the same time. Typical ...

Air flow: 313 l/min
Diameter: 30 mm
Rotational speed: 21,420 rpm

The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly ...

Air flow: 492 l/min
Diameter: 34 mm
Rotational speed: 21,370 rpm

The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly ...

Air flow: 13,600 m³/h - 72,400 m³/h
Diameter: 660 mm - 1,752 mm
Noise level: 65 dB - 74 dB

... closed environments Technical features of axial air extractors MTV G: - Very high air flow - 6-blade stainless steel fans - System for easy disassembly of the engine - Venturi mouthpiece in moplen - Patented ...

Air flow: 20,700 m³/h - 36,700 m³/h
Noise level: 64 dB

... warehouses, farms, greenhouses, etc. The equipment consists of a structure made of galvanized steel and incorporates a helical fan with overpressure shutter with an automatic opening system. In addition, it incorporates ...

Air flow: 20,700 m³/h - 36,700 m³/h
Noise level: 64 dB

This type of fans provide significant air flows for the extraction and/or ventilation of industrial, livestock or agricultural premises. Main features - Structure and overpressure slats in galvanized steel to avoid ...

Air flow: 69,000 m³/h
Diameter: 1,400, 900 mm

Ceiling fans to cool in summer and save in winter DVW ceiling fans allow them to be used to ventilate in the summer and recover the stratified heat on the ceiling in winter, using the fan ...

Water Cooling Tower fans were devided into three types, fixed type fan, the cross type fan, and the wing type fan.The wing type fan include the four ...