- Hydraulics - Pneumatics >
- Valve >
- Lever valve >
- PRAHER
PRAHER lever valves
DN: 8 mm - 150 mm
Pressure: 125 bar
Ball valve for applications in corrosive media (e.g. chlorides and dilute acids). With a PREN value between 42 and 47, suitable for seawater. 3-piece body, pressure class depending on the nominal size up to PN 125, floating ...
GEFA Processtechnik
DN: 12 mm - 152 mm
Pressure: 0 bar - 10 bar
Temperature: 93 °C
Valves / Butterfly Valves Butterfly Valves offer great durability and ease of use for a wide range of services. Features Easy to install and maintain, butterfly valves ...
DN: 0.25 in - 4 in
Pressure: 7, 10 bar
Temperature: -17 °C - 175 °C
Valves / Ball Valves Ball valves offer great economy and durability for a wide range of applications that do not require clean-in-place (CIP) service. They are easy to install and ...
DN: 12, 6 mm
Pressure: 0 bar - 500 bar
Temperature: -20 °C - 60 °C
C2.940 High-pressure shut-off valves C2.940 High-pressure shut-off valves max. operating pressure 500 bar nominal diameter: ND 6 and 12 temperature range: 40º ... + 100ºC ports: G1/4 or G1/2
Temperature: -10 °C - 95 °C
Tork's T-PKV .W812 is a butterfly valve which is made up of PVC with an extensive pressure of 10 bar and a maximum temperature that ranges from -10 up to 95° C. The unit has EPDM,VITON for its seal. The butterfly valve ...
Pressure: 10 bar
Temperature: -30 °C - 130 °C
... L1140 LUG screwed hole butterfly valve is designed for use in heavy duty industrial operations. Constructed with epoxy coated GG 25 casting iron, the valve is equipped with EPDM standard seals and ...
Pressure: 16, 40 bar
Temperature: -20 °C - 140 °C
... with 3-way ball valves screwed connection that can be mounted and has two slide flow and the o-ring is PTFE. The w-temperature is -20 up to 140 degrees and the w. pressure is PN 40 bar or 1/2"..11/4" and 16 bar or 11/2"...3". ...
DN: 50.8, 76.2, 127, 38.1 mm
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...
3-Way and 6-Way Ball Valves Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, which are limited ...
DN: 1.5 in - 8 in
Pressure: 0 psi - 5 psi
Flow rate: 0 us gal/min - 2,000 us gal/min
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...
DN: 20 mm - 63 mm
Pressure: -1 bar - 16 bar
Temperature: -20 °C - 80 °C
Main advantages - Separation system for the condense - Easiness and quickness of assembling - Reliability and security - High flow rate - Wide range of accessories - Fire resistance: The system does not stroke or propagate any ...
DN: 110, 80, 168 mm
Pressure: -1 mbar - 16,000 mbar
Temperature: -20 °C - 80 °C
Main advantages - Separation system for the condense - Easiness and quickness of assembling - Reliability and security - High flow rate - Wide range of accessories - Fire resistance: The system does not stroke or propagate any ...
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 80 °C
Radial installation or removal Safety locking handle system Double sided blocked ball Full sectional area of flow Seal materials - EPDM, FPM Ball seating joint - PTFE Connections - flange, PE fusion socket, PE fusion spigot, solvent ...
Praher Plastics Austria GmbH
DN: 65 mm - 200 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
Safety handle with PLS – Praher Labeling System Ten different locking positions Double sealed shaft Encapsulated wetted parts Integrated brackets for fix point mounting Simple upgrade to automatic actuation – ISO 5211 flange type ...
Praher Plastics Austria GmbH
DN: 65 mm - 200 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
Safety handle with PLS – Praher Labelling System Ten different locking positions Double sealed shaft Encapsulated wetted parts Integrated brackets for fix point mounting Simple upgrade to automatic actuation – ISO 5211 flange type ...
Praher Plastics Austria GmbH
Flow rate: 23.7 l/min
Model SP248 chrome-plated brass stay-open valve with squeeze lever handle and built-in 6.25 gpm (23.7 L) flow control. 1/2" IPS inlet x 1/4" IPS outlet.
Haws AG - Headquarters for Europe, Middle East and
DN: 32, 25, 63, 40, 20 mm
OMI Officine Meccaniche Industriali
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 70 °C
This is a hand lever operated pneumatic valve which in turn operates the hydraulic valve and clutch assembly to connect the hydraulic pump. It is also with ETO ON and OFF switch for ...
DN: 1, 0.75, 0.5 in
Pressure: 350 bar
Flow rate: 180, 120, 80 l/min
Circuit selector valve, manual operation maximum pressure
DN: 0.75, 0.5, 1 in
Pressure: 500 bar
Flow rate: 100, 80, 180 l/min
Constant openning valve, 3 way, made in steel for working with high pressure.
DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
... developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required ...
DN: 40 mm - 200 mm
Pressure: 4 bar - 16 bar
Temperature: 0 °C - 60 °C
... installed as an end line valve, bottom discharge valve or tank dump valve • The wafer valve can be transformed into a one-way Lug body valve thanks ...
DN: 40 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: 0 °C - 100 °C
... dimensions of the valve in accordance with standard ISO 5752 (DN 40÷200 Medium Series 25, DN 250÷ 300 Long Series 16) and DIN 3202 K2 and ISO 5752 (DN 65÷200 K2, DN 250÷300 K3) • Can also be installed as an end line valve, ...
DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C
... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...
DN: 1 in - 3 in
Temperature: -51 °C - 260 °C
Railroad tank car flanged ball valve Performance and quality Features Robust engineering design Special tank car interface options Self relieving seat technology Low emissions stem seal technology High quality Benefits Very ...
DN: 1, 1.5 in
Pressure: 80 bar
Temperature: 0 °C - 70 °C
The iValve is the revolutionary new development of Bucher Hydraulics. This valve contains all advantages of the approved LRV-1 and follows trends and changes in the hydraulic market. With the iValve, yor are ready for ...
DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C
Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to obtain ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
A-BV1-F One-piece housing, short body, open passage, with flange connection to EN 1092-1 PN16, with flange for actuators to DIN / ISO 5211 Housing and ball made of 1.4408. Sealing material PTFE / glass fibre 15%. Temperature range -50 ° C to 200 ° C
DN: 8 mm - 80 mm
Pressure: 64 bar
Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. We reserve the right to alter dimensions.
DN: 4, 6, 3 mm
Pressure: 0 MPa - 0.7 MPa
Temperature: 0 °C - 60 °C
Ball Valve turns on and off air pressure to pneumatic devices. Easily adjustable lever with scale. The flow rate can be adjusted roughly by setting the angle of the lever.
DN: 4 mm - 16 mm
Pressure: 0 MPa - 5.5 MPa
Temperature: -29 °C - 232 °C
... off the valve body. Prevent stem come-off from valve body. No restriction for flow direction. IN/OUT flow can be connected to both side of valve. Oil-free for all parts. There ...
DN: 0.5 in - 6 in
Pressure: 10 bar - 40 bar
Temperature: -46 °C - 400 °C
The AP20P valve belongs to the AP series. It is equipped with metallic seats that permits that engineering of metal seated ball valves. It features ease of maintenance without requiring extra lapping ...
Penta Srl
DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C
Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services (AP10HP) ● ...
Penta Srl
DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: -46 °C - 400 °C
The AP20P valve belongs to the AP series. It is equipped with metallic seats that permit that engineering of metal seated ball valves. It features ease of maintenance without requiring extra lapping of ...
Penta Srl
DN: 8 mm - 50 mm
Pressure: 25 bar - 50 bar
Temperature: -20 °C - 150 °C
... applications – Mini ball valves also with plug connection Operating pressure See table Materials Handle made of steel, nickel-plated and painted Handle made of steel, coated series 20, 21, 30, 31, DVGW series ...
DN: 10 mm - 45 mm
Pressure: 0 bar - 60 bar
Temperature: -20 °C - 220 °C
– Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Ball valve up to max. 60 bar Actuation up to max. 8.4 bar Materials Brass ...
DN: 250 mm - 300 mm
Temperature: -15 °C - 100 °C
Butterfly Valves for silos suitable for intercepting powder products - Valve body in carbon steel - Size DN250 - DN300 - With square or round fixing flange - Monobloc gasket in NBR for continuous ...
DN: 50 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Temperature: -46 °C - 200 °C
Floating Ball Valve soft seated Athena cast steel ball valve - Mainly designed for low-pressure services with a flexible temperature range. - Provides a wide variety of this series of ball valves ...
Athena Engineering S.r.l.
DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar
Trunnion Mounted Ball Valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: RF/RTJ/BW operation: Lever Gear motor/pneumatic actuators product ...
Athena Engineering S.r.l.
DN: 50 mm - 2,400 mm
Pressure: 16 bar - 420 bar
... eccentric butterfly valve, with two-way sealing zero leakage, small torque characteristics, metal sealing valve seat can make it suitable for all kinds of harsh working conditions, the eccentric design ...
Athena Engineering S.r.l.
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
> - Type: 3X2 > - Design: Spool with Cartridge Type > - Port Size: In/Out/Exhaust -1/4" BSP > - Media:Compressed Air, Filtered & Lubricated > - Ambient/Medium Température: - 5°-60°C > Materials of Construction: Aluminium, ...
UFLOW AUTOMATION
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
Type - 5X2 Design - Spool with Cartridge Type Port Size - In/Out- 1/4" BSP & Exhaust - l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, Nitrile, Brass, ...
UFLOW AUTOMATION
DN: 0.25, 0.125 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
Type - 5X3 Design - Spool with Cartridge Type Port Size - In/Out/Exhaust - l/4" BSP & Pilot Port l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, ...
UFLOW AUTOMATION
DN: 2 in - 8 in
Pressure: 0 bar - 284.4 bar
... FVF, a Foot Valve with Strainer and clean lever that make removing of debris easy. It is used in any water pump system pipelines, also served as a check valve function to prevent backflow. What ...
DN: 0.5 in - 2 in
Pressure: 0 bar - 20 bar
Temperature: -15 °C - 80 °C
Model ATRF, This model include a manual lever for quick release action in urgent situations. Suitable for UL Fire protection and Fire Sprinkler air venting systems. Air Vent Valve for Fire Protection ...
DN: 1 in
Male-female straight ball valve complete with soft-seal fitting, butterfly operation (red)
Unidelta S.p.A.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining