DN: 40 mm - 300 mm
Pressure: 6, 16 bar
Temperature: -10 °C - 70 °C
SINGLE-PLATE GATE VALVE TYPE PSA-ELI SIL / ELITA Being part of the proven KÜHME shut-off valves for gas supply lines, the gate valve type PSA-ELI SIL can be used in every application ...
Kühme Armaturen GmbH
DN: 63 mm - 225 mm
Pressure: 1, 4 bar
Temperature: -10 °C - 70 °C
SINGLE-PLATE GATE VALVE TYPE PSA-ELI SIL-PE Being part of the proven KÜHME shut-off valves for gas supply lines, the gate valve type PSA-ELI SIL-PE can be used in every application ...
Kühme Armaturen GmbH
DN: 50 mm - 500 mm
Pressure: 25, 100 bar
Temperature: -10 °C - 80 °C
SINGLE-PLATE GATE VALVE TYPE PSA-ELI SIL Being part of the proven KÜHME shut-off valves for gas supply lines, the gate valve type PSA-ELI SIL can be used in every application where ...
Kühme Armaturen GmbH
DN: 0.25 in - 0.5 in
Pressure: 6, 16 bar
manometer gauge cock, light design, female thread x female thread, material: brass
DN: 8 mm - 20 mm
Pressure: 160, 100 bar
Temperature: -50 °C - 225 °C
... accessories Accessories Heating jacket Hand lever with bayonet locking Hand lever extension Block unit - padlock unit Spring close unit - automatical return lever ...
KLINGER-SCHÖNEBERG GmbH
DN: 8 mm - 20 mm
Pressure: 100, 160 bar
Temperature: -50 °C - 225 °C
... accessories Accessories Heating jacket Hand lever with bayonet locking Hand lever extension Block unit - padlock unit Spring close unit - automatical return lever ...
KLINGER-SCHÖNEBERG GmbH
DN: 15 mm - 200 mm
Pressure: 16, 40 bar
Temperature: -29 °C - 225 °C
... accessories Accessories Heating jacket Hand lever with bayonet locking Hand lever extension Block unit - padlock unit Spring close unit - automatical return lever ...
KLINGER-SCHÖNEBERG GmbH
DN: 50 mm - 200 mm
Pressure: 10 bar - 16 bar
Temperature: 70 °C
optimised body design with guided float to ensure maximal protection of the bleeding and venting device | large bleeding or ventilation quantities owing to ventilation cross sections and connection flange dimensions of the same size | ...
DN: 15 mm - 50 mm
Pressure: 5, 0.5 bar
Temperature: -20 °C - 600 °C
DN: 15, 8, 10 mm
Pressure: 8, 10, 6 bar
Temperature: -20 °C - 140 °C
The ball and shut-off valves are available in 2-way and 3-way configurations and in a wide variety of threaded connections – including push-in. The different flow capacities ensure a reliable solution to the specific ...
DN: 3 mm
Pressure: 320 bar
Flow rate: 20 l/min
The pilot valve is suitable for applications with permanent pressure. The valve is fitted on the left and right side with a locking lever.
DN: 0.25, 0.5 in
Pressure: 100 bar
Temperature: -20 °C - 180 °C
... reducing the ram contact.. Fully open with rotation of 90º, with the lever remaining in line with the valve. If we turn the lever 90º, we give access to the gauge.
Pressure: -1 bar - 10 bar
Temperature: -20 °C - 200 °C
... materials. Lever controlled. Operation Push down lever until sample is collected. Valve spring closes. Features Spring return (Close). Lever operated or ...
DN: 15, 20 mm
Pressure: 16 bar
Temperature: 120 °C
Brass ball valve Novo • - Brass ball valve, screwed ends • - Used for water, steam, gas, petroleum • - Blue color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: ...
Viet - Tiep Joint Stock Company
DN: 8 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C
Brass ball valve Novo • - Brass ball valve, full bore, screwed ends • - Used for water, steam, gas, petroleum • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working ...
Viet - Tiep Joint Stock Company
DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 120 °C
Brass ball valve Kuma • - Brass ball valve, full bore, screwed ends • - Used for water, steam, petroleum • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: ...
Viet - Tiep Joint Stock Company
DN: 10 mm
Pressure: 0.3 bar - 10 bar
Temperature: 5 °C - 60 °C
... , the final closing procedure is due to the buoyancy of the float body. Valves of this design are single chamber valves with the inlet ninety degrees to the outlet. The valve, having ...
A. u. K. Müller
Pressure: 15,000, 10,000 psi
Temperature: -18 °C - 204 °C
... style ball and stem that eliminates the possibility of ,,stem-turnout,, common with other valves designed for similar service. In addition, these specialty ball valves have re-torqueable seat glands that ...
Watts Fluid Air
DN: 0.5 in - 1 in
Pressure: 138 bar
... Drain Ball Valve has a spring return handle, and available in either stainless or carbon steel. The spring return “deadman” handle 76-500 and 89-500 series valves are handles that have a water, oil ...
DN: 40 mm - 400 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 95 °C
Butterfly valves, Butterfly valves lug type, Butterfly valves lug type on nodular cast iron PN 16 (EN-GJS-400-15) This butterfly valve's nodular cast iron body and ...
Mival
DN: 8 mm - 300 mm
Pressure: 63 bar
Temperature: -10 °C - 200 °C
Ball valve to ANSI/ASME with threaded ends (NPT), butt weld or socket weld ends, three-piece body, full bore, floating ball. Plastomer sealing (also in fire-safe design). Main Applications General industry ...
KSB
DN: 15 mm - 80 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 185 °C
... steel full bore ball valve of 3-piece design for steam, water and air. Benefits and Features High Cost Performance Ratio Long Service Life All stainless steel for excellent resistance to rust, and the carbon-Teflon ...
DN: 80 mm
Pressure: 10 bar
Temperature: -40 °C - 180 °C
Features •Maximum mounting flexibility •Superior corrosion resistance •Extended lifetime •Minimized operating costs Specifications •Design - ISO/DIN •Nominal Pressure = 10 bar •Disc Lining = PFA •Body Lining = PTFE ...
DN: 0.25 in - 2 in
Pressure: 27.5 bar
These ball valves are 2-way floating ball type. They Provide quick, reliable and easy on/off control for manual release, isolating valves and drains.
BERMAD CS Ltd
DN: 0.5 in - 2 in
Pressure: 28 bar
... information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and residential applications. NIBCO® specialty valves are backed by ...
NIBCO
DN: 0.25 in - 2 in
Pressure: 2,000 psi
AISI-316 (ASTM-A351-CF8M, EN10213 1.4408), AISI-304 (ASTM-A351-CF8, EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end,Blow-out proof stem Polished surface (stainless steel only),
BOLA-TEK Mfg.Co
DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C
... Features MH32F: 3-way valves with nominal diameters DN 20...150 MH42F: 4-way valves with nominal diameters DN 32...50 Can be combined with the AR30 and ASM 105, 115, 124 motorised actuators Manual ...
DN: 0.375 in
Ball valve • Very suitable for quick shut-off valve (open-close) • Can be operated under maximum pressure • Connection: 3/8" NPT female (2x)
DN: 15 mm - 400 mm
Pressure: 55 bar
Temperature: -196 °C - 450 °C
... floating (seat supported) ball valves, incorporating mounting flanges to BS EN ISO 5211, featuring soft, metal and carbon seated designs There are two separate design types within the one piece Ultra-Seal range, depending ...
Pentair Valves & Controls
DN: 4 mm
Pressure: 500 bar
... SAE J 514 (UN/UNF), ISO 8434-3 (ORFS), DIN 2353/ISO 8434-1 (24° taper, light and heavy series) Ball Valve Mild Steel, zinc/iron-plated 3-way Ball Valves 24° 06L
STAUFF
DN: 25, 50, 16, 40 mm
Pressure: 4.5 bar - 7 bar
Temperature: 100, 80, 50 °C
The low-priced mini vacuum gate valve is well suited for industrial and R&D applications. It is often used in pipings of industrial systems.
VAT Vakuumventile AG
Please specify:
Help us improve:
remaining