Richter lever valves

DN: 12, 6 mm
Pressure: 0 bar - 500 bar
Temperature: -20 °C - 60 °C

C2.940 High-pressure shut-off valves C2.940 High-pressure shut-off valves max. operating pressure 500 bar nominal diameter: ND 6 and 12 temperature range: 40º ... + 100ºC ports: G1/4 or G1/2

Temperature: -10 °C - 95 °C

Tork's T-PKV .W812 is a butterfly valve which is made up of PVC with an extensive pressure of 10 bar and a maximum temperature that ranges from -10 up to 95° C. The unit has EPDM,VITON for its seal. The butterfly valve ...

Pressure: 10 bar
Temperature: -30 °C - 130 °C

... L1140 LUG screwed hole butterfly valve is designed for use in heavy duty industrial operations. Constructed with epoxy coated GG 25 casting iron, the valve is equipped with EPDM standard seals and ...

Pressure: 16, 40 bar
Temperature: -20 °C - 140 °C

... with 3-way ball valves screwed connection that can be mounted and has two slide flow and the o-ring is PTFE. The w-temperature is -20 up to 140 degrees and the w. pressure is PN 40 bar or 1/2"..11/4" and 16 bar or 11/2"...3". ...

DN: 50.8, 76.2, 127, 38.1 mm

HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...

3-Way and 6-Way Ball Valves Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, which are limited ...

DN: 1.5 in - 8 in
Pressure: 0 psi - 5 psi
Flow rate: 0 us gal/min - 2,000 us gal/min

HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...

DN: 20 mm - 63 mm
Pressure: -1 bar - 16 bar
Temperature: -20 °C - 80 °C

Main advantages - Separation system for the condense - Easiness and quickness of assembling - Reliability and security - High flow rate - Wide range of accessories - Fire resistance: The system does not stroke or propagate any ...

DN: 110, 80, 168 mm
Pressure: -1 mbar - 16,000 mbar
Temperature: -20 °C - 80 °C

Main advantages - Separation system for the condense - Easiness and quickness of assembling - Reliability and security - High flow rate - Wide range of accessories - Fire resistance: The system does not stroke or propagate any ...

DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 80 °C

Radial installation or removal Safety locking handle system Double sided blocked ball Full sectional area of flow Seal materials - EPDM, FPM Ball seating joint - PTFE Connections - flange, PE fusion socket, PE fusion spigot, solvent ...

DN: 65 mm - 200 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

Safety handle with PLS – Praher Labeling System Ten different locking positions Double sealed shaft Encapsulated wetted parts Integrated brackets for fix point mounting Simple upgrade to automatic actuation – ISO 5211 flange type ...

DN: 65 mm - 200 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

Safety handle with PLS – Praher Labelling System Ten different locking positions Double sealed shaft Encapsulated wetted parts Integrated brackets for fix point mounting Simple upgrade to automatic actuation – ISO 5211 flange type ...

Pressure: 0 bar - 10 bar
Temperature: -20 °C - 70 °C

This is a hand lever operated pneumatic valve which in turn operates the hydraulic valve and clutch assembly to connect the hydraulic pump. It is also with ETO ON and OFF switch for ...

DN: 1, 0.75, 0.5 in
Pressure: 350 bar
Flow rate: 180, 120, 80 l/min

Circuit selector valve, manual operation maximum pressure

DN: 0.75, 0.5, 1 in
Pressure: 500 bar
Flow rate: 100, 80, 180 l/min

Constant openning valve, 3 way, made in steel for working with high pressure.

DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

... developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required ...

DN: 40 mm - 200 mm
Pressure: 4 bar - 16 bar
Temperature: 0 °C - 60 °C

... installed as an end line valve, bottom discharge valve or tank dump valve • The wafer valve can be transformed into a one-way Lug body valve thanks ...

DN: 40 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: 0 °C - 100 °C

... dimensions of the valve in accordance with standard ISO 5752 (DN 40÷200 Medium Series 25, DN 250÷ 300 Long Series 16) and DIN 3202 K2 and ISO 5752 (DN 65÷200 K2, DN 250÷300 K3) • Can also be installed as an end line valve, ...

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...

DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C

Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to obtain ...

DN: 50 mm - 200 mm
Temperature: -30 °C - 120 °C
Flow rate: 0 l/min - 15,000 l/min

robust chemical valve with clip seal stainless steel spindle for reliable power transmission additional, double shaft seal hand lever with practical locking function O rings included in the scope ...

DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h

Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation using electric variable speed actuators Reproducible ...

DN: 10 mm - 25 mm
Pressure: 10 bar - 16 bar
Temperature: -30 °C - 140 °C

Dosing ball valve based on the C 200 Finely adjustable using 180° opening angle Reproducible settings by means of 180° scale disk / scale division 5° Simple automation using electric variable speed actuators

DN: 4, 6, 3 mm
Pressure: 0 MPa - 0.7 MPa
Temperature: 0 °C - 60 °C

Ball Valve turns on and off air pressure to pneumatic devices. Easily adjustable lever with scale. The flow rate can be adjusted roughly by setting the angle of the lever.

DN: 4 mm - 16 mm
Pressure: 0 MPa - 5.5 MPa
Temperature: -29 °C - 232 °C

... off the valve body. Prevent stem come-off from valve body. No restriction for flow direction. IN/OUT flow can be connected to both side of valve. Oil-free for all parts. There ...

DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C

Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services (AP10HP) ● ...

DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: -46 °C - 400 °C

The AP20P valve belongs to the AP series. It is equipped with metallic seats that permit that engineering of metal seated ball valves. It features ease of maintenance without requiring extra lapping of ...

DN: 0.5 in - 6 in
Pressure: 16 bar
Temperature: -46 °C - 400 °C

... series is a line of ball valves manufactured by Penta. It offers an efficient solution for high-temperature fluid handling with reliability and capability. The ball valves are also produced with quality, ...

DN: 8 mm - 50 mm
Pressure: 25 bar - 50 bar
Temperature: -20 °C - 150 °C

... applications – Mini ball valves also with plug connection Operating pressure See table Materials Handle made of steel, nickel-plated and painted Handle made of steel, coated series 20, 21, 30, 31, DVGW series ...

DN: 10 mm - 45 mm
Pressure: 0 bar - 60 bar
Temperature: -20 °C - 220 °C

– Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Ball valve up to max. 60 bar Actuation up to max. 8.4 bar Materials Brass ...

DN: 250 mm - 300 mm
Temperature: -15 °C - 100 °C

Butterfly Valves for silos suitable for intercepting powder products - Valve body in carbon steel - Size DN250 - DN300 - With square or round fixing flange - Monobloc gasket in NBR for continuous ...

DN: 50 mm - 1,500 mm
Pressure: 16 bar - 420 bar
Temperature: -46 °C - 200 °C

Floating Ball Valve soft seated Athena cast steel ball valve - Mainly designed for low-pressure services with a flexible temperature range. - Provides a wide variety of this series of ball valves ...

DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar

Trunnion Mounted Ball Valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: RF/RTJ/BW operation: Lever Gear motor/pneumatic actuators product ...

DN: 50 mm - 2,400 mm
Pressure: 16 bar - 420 bar

... eccentric butterfly valve, with two-way sealing zero leakage, small torque characteristics, metal sealing valve seat can make it suitable for all kinds of harsh working conditions, the eccentric design ...

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C

> - Type: 3X2 > - Design: Spool with Cartridge Type > - Port Size: In/Out/Exhaust -1/4" BSP > - Media:Compressed Air, Filtered & Lubricated > - Ambient/Medium Température: - 5°-60°C > Materials of Construction: Aluminium, ...

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C

Type - 5X2 Design - Spool with Cartridge Type Port Size - In/Out- 1/4" BSP & Exhaust - l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, Nitrile, Brass, ...

DN: 0.25, 0.125 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C

Type - 5X3 Design - Spool with Cartridge Type Port Size - In/Out/Exhaust - l/4" BSP & Pilot Port l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, ...

DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C

... shut-off valve is arrested even without a shift lever. Various additional flanges and parts permit direct fixing to an oil tank (T-flange) or incorporation in a pipe (threaded bush). Thanks to the ...

DN: 2 in - 8 in
Pressure: 0 bar - 284.4 bar

... FVF, a Foot Valve with Strainer and clean lever that make removing of debris easy. It is used in any water pump system pipelines, also served as a check valve function to prevent backflow. What ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 20 bar
Temperature: -15 °C - 80 °C

Model ATRF, This model include a manual lever for quick release action in urgent situations. Suitable for UL Fire protection and Fire Sprinkler air venting systems. Air Vent Valve for Fire Protection ...