RINGSPANN clamping

Clamping force: 2,500 N - 200,000 N

The KE … FHK clamping unit is a spring activated product which has a hydraulic release which make it useful for operations such as continuous piston rod clamping. The unit has holding forces which ...

Clamping force: 1,000 N - 6,300 N

Features - Clamping Unit - Sizes 40, 50, 63, 80 or 100 are available - Spring activated - Pneumatically released - No wear adjustment

Clamping Systems RTM 601 for integrated torque motors for mounting and centring rotors Features - Provides a mechanical connection and centring between rotor and machine shaft - Backlash free, torsion-proof transmission ...

... breaking off the workpieces, deburring or clamping using clamps or double-sided tape is no longer required. grinding milling drilling 5-side machining, including all cutouts high holding force clamping ...

... accommodate clamping elements of the same size in a grid of 150 x 150 millimeters - individually distributed as required and according to the shape of the workpiece to be clamped. Various elements are available with ...

... individual adaptation to the respective clamping situation Handling pods serve as support for the workpiece to be clamped easy activation of individual pods by flipping over modular system, extendable for large ...

Clamping force: 20 kN

... sub-part clamp and the sub-part stop enable workpieces to be clamped on the front face. This allows the full area of the machine table to be used to clamp the workpiece. Hold-down effect due to inclined ...

The floating clamp is used to clamp and support additional clamping points on components. The benefits of the floating clamp are: Avoids vibration during the ...

... Floating clamps with separate clamping and locking are used to clamp and support additional clamping points on extremly pliable workpieces. Both, clamping ...

Clamping force: 400 N - 5,000 N

Pneumatic Clamping Element For rails : 15 to 65 mm Type: Closed without pressure Body in steel Operating temp. -20°C to 80°C Operation Pressure 5,5 to 8 bar

Clamping force: 650 N - 3,000 N

Pneumatic Clamping Element For rails : 15 to 65 mm Type: Open without pressure Body in steel Operating temp. -20°C to 80°C Operation Pressure 5,5 to 8 bar

Clamping force: 1,300 N - 3,000 N

Double Piston Clamping Element For rails : 20 to 45 mm Type: Open without pressure Body in steel Operating temp. -20°C to 80°C Operation Pressure 5,5 to 8 bar

Clamping force: 0 N - 12,000 N

Body in spheroidal graphite cas iron of high resistance protected by epoxy paint. Double ribbed reinforced body. Grooved and zinc plated pat at screw. Adjusted milled and grooved anvil. Rolled, browned screw with trapezoidal thread. ...

Clamping force: 0 N - 12,000 N

Body in spheroidal graphite cas iron of high resistance protected by epoxy paint. Double ribbed reinforced body. Grooved and zinc plated pat at screw. Adjusted milled and grooved anvil. Rolled, browned screw with trapezoidal thread. ...

Clamping force: 0 N - 12,000 N

Body in spheroidal graphite cas iron of high resistance protected by epoxy paint. Double ribbed reinforced body. Grooved and zinc plated pat at screw. Adjusted milled and grooved anvil. Rolled, browned screw with trapezoidal thread. ...

EASYCLAMP -a Popular clamp tool for plastic injection molding in Japan- Quick yet reliable mold replacement is realized thanks to its unique structure. One type of EASYCLAMP can fit 4 different heights just turning the ...

WELDING TABLE EQUIPMENT SET 1 for Manufacturing Frames

Well thought-out and easy to handle, robust and tried and tested.

Well thought-out and easy to handle, robust and tried and tested.

Materials: flexible PVC Colours: transparent (indoor use) black - grey - yellow (outdoor use) Temperatures of use: -20 to +60°C Hardness Shore A: 85 ±5 Tensile strength at break: >20 MPa Ultimate elongation: 300 % Dielectric strength: ...

Material: nitrile rubber Colour: black Temperatures of use: -20 to +85°C Tensile strength: > 14 MPa Ultimate elongation: 400 % Chemical resistance: • good resistance to solvents • good resistance to ozone • good resistance to ...

Clamping force: max 120.0 kN

• side operation • low profile • with through-hole thread

Clamping force: 250, 80, 40, 180, 140 kN

SC – power clamping screw • wedge mechanism as force booster • high clamping force - low tightening torque • high operation safety • simple manual operation

Clamping force: 60 kN - 200 kN

• high clamping forces - low tightening torques • with bottomed thread - thread protected • centered operation • compact design - up to 200° C (optional up to 400°C)

B TYPE (ALUMINUM ALLOY BODY) Product Description Model No. LD-30B / LD-40B / LD-50B Vertical and horizontal configuration. Applicable to BT, CAT, DIN tapers.

There are 4 types of product items. AMS-160A, AMS-160AH,AMS-160B, AMS-160BH 1. - Fast, accurate and repeated selection and use. Multi-point positioning can be done. 2. - It can be locked on various machinery. 3. - Easy to operate, ...

1. - Fast, accurate, and repeated selection and use. Multi-point positioning can be done. 2. - It can be locked on various machinery. 3. - Easy to operate, and arbitrarily change of height and direction. 4. - With wrench.

... & RISERS 52/96 COMBO PLATES & RISERS SINGLE PLATES MASTER GAUGING PLATES ADAPTER PLATES RISER BLOCKS MULTI PLATES CLAMPING BRIDGES for 4-AXIS TWIN BASES TOMBSTONES 3-FACED PYRAMIDS COLLECT CHUCK ROUND BAR ...

Multi-Fixture Clamps and Stops The MITEE-BITE Multi-Fixture Clamp offers increased versatility through its unique riser clamp design. Provides flexible set ups for hard to hold ...

Clamping force: 50,000, 89,000 N

... large M12 Pitbull® Clamps (12,000 lbs/50,000 N.) or OK-VISE® DK model clamps (20,000 lbs/89,000 N.). PROPER USE: 1. Hand tighten two rear mounting screws and clamp screw just until t-nuts ...

Spring Loc™ and Sliding Stop™ The Spring-Loc™ is an extremely low profile (.072″) adjustable clamp capable of producing approximately 10 lbs. of clamping pressure depending on how much the flex arm is ...

This is an Eccentric clamping device manufactured by Andilog Technologies which is designed for a sample which has one inch wide and a 0.375 in thickness. It features its functionality of having a self-closing cam clamps ...

Clamping force: 2.7 kN - 17.6 kN

... stroke).After the swing strike (swivel movement) has been completed, the actual clamping stroke is initiated.Swivel- and clamping stroke result in the total stroke.The swing clamps are ...

Clamping force: 1.4 N - 6.6 N

Compact Swing Clamp Hydraulic, max. 230 bar, double acting This swing clamp is interchangeable to competitive link clamps. Available as plug-in and manifold mounting type. - Mechanically insensitive - ...

Clamping force: 1.8 kN - 21.2 kN

Standard Swing Clamp Hydraulic, max. 350 bar, Single- and double acting These swing clamps are offered as a superstructure version and can be operated by means of the lateral threaded connections ...

... layers of paving blocks at a time. Mostly applied in conjunction with sandblasting machines. Available with 2 or 4 sided clamping, depending on the size and shape of the paving blocks. Further information • - ...

... precise. To secure the building material, the user pushes on the top clamping element with one foot. When the user takes their foot off the non-slip tread, springs push the clamping elements apart again ...

... compressed air, it does not cause any contamination. Different clamping directions The RotoClamp clamping systems are available in an internal clamping - RotoClamp Inside - and ...

... DiskClamp also has an emergency braking function that effectively decelerates loads in the event of a pneumatic failure. A clamping system alone is sometimes not enough Some applications are about more than fixing ...

PClamp is a modular built system for the secure clamping of rod loads and pneumatic cylinders. It can be adapted to standard systems such as pneumatic cylinders of leading manufacturers (e.g. SMC, Festo) or to individual ...