- Hydraulics - Pneumatics >
- Valve >
- Diaphragm valve >
- Saint-Gobain
Saint-Gobain diaphragm valves
DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C
The rossignol metering valve will be fitted di- rectly to the cylinder valve. Due to the slim conus of the metering spindle the rossignol valve guarantees precise metering. As an ...
Hornung GmbH
DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C
The diaphragm shut-off valve HP 550 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has 3 inlets and one outlet. Threaded holes on ...
Hornung GmbH
DN: 4 mm
Pressure: 0 bar - 300 bar
Temperature: -20 °C - 70 °C
The diaphragm shut-off valve HP 551 is laid out for the use in pure gas supply systems. The diaphragm shut-off valve has an inlet and an outlet. Threaded holes on the ...
Hornung GmbH
DN: 4 mm - 8 mm
Pressure: 0.1 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C
This speed controller fixes the operation speed of driving device. It is best suited for use with mass-produced dedicated machines. Orifice bore φ0.1mm and φ0.2 mm are added. Orifice bore can be selected from φ0.1mm to φ2 mm, in ...
DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel ...
Kemper Olpe GmbH
DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... sensor or thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel free from dead ...
Kemper Olpe GmbH
DN: 50, 15, 40, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water spindle with O-ring EPDM-seat gasket gunmetal cone male union thread with plugged drain ...
Kemper Olpe GmbH
DN: 15 mm - 900 mm
Pressure: 16 bar - 420 bar
Sliding Stem Valves Series body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) alloy steel end connection: RF/RTJ/BW operation: Diaphragm/ motor/pneumatic ...
Athena Engineering S.r.l.
DN: 20 mm - 300 mm
Pressure: 16 bar - 420 bar
Single-seated Control Valve body material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel end connection: operation:the PDL series pneumatic diaphragm actuator, PCL series pneumatic piston ...
Athena Engineering S.r.l.
DN: 40 mm - 450 mm
Pressure: 16 bar - 420 bar
... Control Valve body material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel end connection: operation: PDL pneumatic diaphragm actuator、PCL pneumatic piston actuator、Electric actuator product ...
Athena Engineering S.r.l.
Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C
• Compact series lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment.
... ] orifice diameter, internal pilot type chemical 2-3 port valve that does not transmit heat to fluid. Up to two air-operated valves can be controlled simultaneously by a single solenoid valve. ...
Pressure: 25 psi - 250 psi
Temperature: 71 °C
DN: 2 in - 12 in
Model RAF, Altitude Valve closes at a preset maximum water level to prevent overflow of a ground storage tank or reservoir and opens to refill when the water level in the tank or reservoir lowers. Features ◆ Maintains ...
Elite Line Industrial Corp.
DN: 1.5 in - 10 in
Pressure: 0 psi - 144.2 psi
Temperature: -15 °C - 80 °C
... , The Diaphragm design Float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a specified ...
Elite Line Industrial Corp.
DN: 1.5 in - 12 in
Pressure: 1 bar - 13 bar
Model DTR / DFR, Diaphragm pilot control Pressure Reducing Valve reduces pressure of inlet flow into desired outlet pressure. Pressure Reducing Valve can prevent damage within pipelines ...
Elite Line Industrial Corp.
DN: 0.125 in - 1 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
Series of quick exhaust valves in nickel-plated brass and in stainless steel
Pressure: 250 bar
CAV-250 Stand-alone high pressure valves for all type of paint types. CVM-250 is a colour valve module to be used for external paint or material supply to an applicator of any type. Can be built in ...
DN: 1.5, 2, 2.5, 3, 4 in
Flow rate: 5 m³/h - 150 m³/h
This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...
A.G.P. VALVULAS 10 SL
DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h
This valve opens and closes in response to an electric signal by means of an incorporated 3 way solenoid (3/2). The signal can come from a controller, main switch, PLC, etc. Depending on the type of the solenoid the ...
A.G.P. VALVULAS 10 SL
DN: 10 mm - 100 mm
Temperature: -20 °C - 60 °C
... only remove 4 screws • Box with two end of career – Electromechanical – Proximity NAMUR – PNP Proximity • Pilot Solenoid Valve 3/2 and 5/2 way • Robust pneumatic actuator
DIVATEC,SL
DN: 15 mm - 100 mm
Pressure: 10 bar
• For regulating viscous fluids or with solid particles • Diaphragm in EPDM or FPM, PTEF resistant to all acids • PVC, PP or PVDF materials • PN10 • Handwheel or with pneumatic actuator NA, DA, NC • Electromechanical ...
DIVATEC,SL
DN: 15 mm - 32 mm
Pressure: 6 bar
• For regulating viscous fluids or with solid particles • Diaphragm in EPDM or FPM, PTEF resistant to all acids • PVC, PP or PVDF materials • PN6 • Handwheel or with pneumatic actuator NA, DA, NC • Electromechanical ...
DIVATEC,SL
DN: 25 mm - 150 mm
Pressure: 10 bar
Temperature: -10 °C - 25 °C
... different applications and products Easy maintenance without the need for special tools Sturdiness: valve bodies made from solid bar The BZAW3 is a double seal valve designed to guarantee separation ...
BARDIANI VALVOLE S.p.a.
DN: 0.5 in
Pressure: 30 psi - 125 psi
Walchem’s economical Tri-Purpose Valves are three valves in one. Installed in one direction, the spring loaded PTFE faced diaphragm provides 30 psi of back pressure and anti-syphon protection. ...
Pressure: 30 psi - 150 psi
Walchem’s Multi-Function Valves (MFV) provide anti-syphon, back pressure, bleed, drain and pressure relief for your 11, 16 and 21 size E class metering pumps. These valves will prevent syphoning when ...
DN: 3 mm - 24 mm
M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...
DN: 10 mm - 100 mm
Pressure: 25 bar
Temperature: -10 °C - 80 °C
for water distribution domestic and individual 10 BIS : With 1/4'' plugs on both sides to allow pressure gauge connection Possibility of assembly of compensating spring (except for 4'' size) to obtain settings at 0.5 bar Setting ...
Diaphragm / Pinch valves Diaphragm valves are characterized by a straight passage design, and are typically used with corrosive or abrasive fluids. This valve ...
KLINGER
DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: -10 °C - 120 °C
Body material Forged brass Stem material Stainless steel Diaphragm EPDM Tightness PTFE
DN: 8 mm - 19 mm
Pressure: 0 bar - 40 bar
Brass diaphragm valve For non corrosive gases and gas mixtures up to quality 6.0 Suitable for pressures up to 40 bar Wide range of in- / outlets Metal-to-metal sealing to atmosphere ...
Spectron Gas Control Systems GmbH
DN: 3 mm
Pressure: 0 bar - 200 bar
Brass control valve (e. g. for the pressure regulator outlet) For non corrosive gases and gas mixtures up to qualität 6.0 Suitable for pressures up to 50 bar (control valve) or 200 bar (shut-off-valve) Ergonomically ...
Spectron Gas Control Systems GmbH
DN: 8 mm - 19 mm
Pressure: 1 Pa - 4,000,000 Pa
Product features Stainless steel diaphragm valves For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0 Suitable for pressures up to 40 bar Wide range ...
Spectron Gas Control Systems GmbH
DN: 0.125 in - 0.5 in
Pressure: 21 bar
... connections, 1/4 in. 2-way low-pressure gauge port, aluminum spring cage, Buna-N stainless steel disc, reinforced Buna-N diaphragm, and tee handle adjustment. Options include Viton trim and slotted adjusting screw. Strainers ...
Temperature: 330, 180, 265 °C
... contamination from air leaks into the valve. Reduced maintenance with extended valve lifetime Extend your treated GC valve head coating lifetime due to our reduced insert and ...
ASDevices
Temperature: 180, 260 °C
The most reliable and durable valve Our patented compact Purged Lip Sealing Valve (PLSV) is a disruptive analytical valve that offers the best of both worlds: a longer lifetime than ...
ASDevices
... complexity. Our Purged Pulse Diaphragm Valve (PPDV) changed all that. Using the static purge principle to purge the valve’s inner volume through the actuation gas, it works for applications ...
ASDevices
DN: 3 in - 24 in
M&J Valve's high quality 4-way diverter valve system is specifically designed for the rigid requirements of bi-directional meter proving. The M&J 4-Way Diverter Valve is the heart of ...
DN: 1 mm - 50.8 mm
Pressure: 5 bar - 70 bar
Temperature: -20 °C - 60 °C
The valve model TWIN has unique design that offers for high pressure applications with compressed gas two systems of slam shut for over pressure in only one body valve. It because the valve ...
DN: 1 in - 12 in
Pressure: 20 mbar - 70,000 mbar
Temperature: -20 °C - 60 °C
... For disengaging by decrease on pressure it is possible to regulate the shut-off valve from 0 to 15 bar; over matching the EN 14382 standard. The security shut-off valves are very fast disengaging, ...
DN: 1, 2 in
Pressure: 8 bar
The valve CELTIC-N is a new model developed by Gascat Engineering to use in blanketing systems. Blanketing systems is a process of using an inert gas such as nitrogen or carbon dioxide, in storage tanks to maintain a ...
DN: 50 mm - 1,000 mm
Pressure: 10, 16, 25 bar
Valves are used for an extensive range of applications and are entirely made of ductile iron with internal components in stainless steel. STANDARDS OF MANUFACTURE EN 1074-1 VALVES FOR WATER SUPPLY EN ...
ACMO S.p.A.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining