SAMES KREMLIN pneumatic pumps

Pressure: 90 psi

... 6.2 bar) •Ultimate performance and reliability with extended service life •Built-in auto shutoff, automatically shuts off pump when bag is empty and restarts when a full bag is connected •Easy installation with all ...

Flow: 7 l/min - 40 l/min
Pressure: 2 bar - 8 bar
Input diameter: 90, 80, 48 mm

The full-flow pumps of the TF series for wells produced by DIMACO S.a.s., make it possible to operate without need to external controls or sensors. The pumps are in fact able to check inside the fluid ...

Flow: 84.9 l/min
Pressure: 2.07 bar
Power: 350 W - 388 W

Oil-less, non-lube piston and cylinder Permanently lubricated bearings Stainless steel valves Lightweight cast aluminum components Long-life, high performance piston seal Thin wall, hard coated aluminum cylinder ...

Flow: 7.5 l/min
Pressure: 580 bar
Weight: 55 kg

... sealing performance, even with contaminated "dirty" air environments for long life without repair. Reduced Icing - Large air porting design provides efficient use of compressed air ...

Flow: 5 l/min
Pressure: 100 psi
Fluid temperature: 5 °C - 45 °C

... connections with push-in fittings Applications: • Point-of-Care Testing • Nucleic Acid Purification • Air Over Liquid • Pneumatic Actuation • Microfluidic Chips

Flow: 0.95 l/min - 7.57 l/min
Pressure: 207, 103 bar

... Nordson® Model 64B pump is a positive-displacement, demand-type pump designed to operate multiple guns at mid-range volume or a single gun in high-volume applications of high viscosity materials. Lower ...

Flow: 18, 2.4 l/min
Pressure: 14.4, 12, 0.8 MPa
Weight: 15 kg

... 4-leg, mobile trolley version for small volumes with hopper or with wall mount for stationary operation No more icing in continuous operation IceBreaker motor Outstandingly economical: Operates even at low inlet air ...

Flow: 50 l/min
Pressure: 6 bar
Fluid temperature: 65 °C

... new pneumatic, double diaphragm pump from Sames designed for low-pressure circulating systems, capable of feeding multiple guns. Sames is proud to introduce the new 3.5:1 pump into our ...

Flow: 0 l/min - 0.3 l/min
Pressure: 2,000 psi - 10,000 psi

... Series D continuous-flow systems couple two pump modules to a single controller, and use an active or passive valve manifold to provide non-stop, continuous feed of almost any fluid. The controller refills one pump ...

Flow: 11 l/min - 17 l/min
Pressure: 2 bar - 8 bar
Head: 0 m - 80 m

... designed and constructed in Italy ■ PATENTED stall-prevention pneumatic circuit ■ Operates with non-lubricated air ■ SELF-PRIMING ■ Dry operation ■ ATEX certification for ZONE 1 - ZONE 2 ■ Adjustable ...

Flow: 7 l/min
Pressure: 6 bar
Head: 60 m

... double-diaphragm pump gives process managers a versatile solution to almost any chemical dosing or liquid transfer application. Free of electrical components, Duotek can be fully submerged without any affect on performance, ...

Pressure: 5 bar - 8.5 bar
Fluid temperature: 0 °C - 49 °C

... filter/regulator/lubricator) to control air to recommended operating range. Normally, the air-operated Airmatic is used with a 3/2-way electrical solenoid valve (optional) to control and vent shop air ...

Flow: 0.3, 0.5, 1, 2 l/min
Pressure: 1,000, 670, 250, 160 bar

... supercritical fluids such as CO2 (with mounted pump head cooling device)metering against constant pressureThe delivery flow rate depends on the compressed air supply and the back pressure ...

Flow: 70 l/min - 100 l/min
Head: 6 m - 12 m
Power: 420 W

Product Details Pump Tube Material: PP Pump Shaft Material: Hastelloy Pump Pipe Length: 1200 or 1000 mm Diameter of Pump Pipe: 41mm Sealing: Non-seal, exact solution! ...

Flow: 0 l/min - 50 l/min
Pressure: 0 Pa - 12,000,000 Pa

Pneumatic pump units with a mechanical limit switch.

... . T6000 SERIES PUMPS Features 6 inch air cylinder Available in 9 different pump ratios 2.5 inch pump stroke Maximum operating pressure of 58,000 psi (4000 bar) Maximum ...

Flow: 10 l/min
Pressure: 16 bar
Fluid temperature: 10 °C - 60 °C

PNEUMATIC PUMP FOR FRESH OIL REMOTE OIL EQUIPMENT TPKE, LEGALLY CALIBRATABLE This pneumatically-driven piston pump is used for the conveying of lubricants and similar fluids when the ...

Flow: 75 l/min
Pressure: 0 bar - 8.4 bar
Head: 84 m

... indefinitely. It cannot air bind, has no stator to burn out, and no seal to fail. The ODS Pump is adjustable while in operation for maximum flexibility of both the capacity and discharge pressures. The ...

Flow: 8.4 l/min
Pressure: 21 bar

Air operated 3:1 diaphragm pump The Binks DX200 3:1 pump has been designed to perform in tough spray gun, system or transfer applications. Higher fluid pressure with constant low ...