DN: 150 mm - 180 mm
AWF
DN: 50 mm - 800 mm
Pressure: 10 bar - 50 bar
Temperature: -40 °C - 400 °C
... eccentric butterfly valve Elara is available in forged or cast executions and different body, disc and seat materials. Application fields cover power generation, district cooling and heating as well as chemical processes ...
DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C
Model RET-DS / REF-DS are the Direct Acting Pressure Reducing Valve designed with Duplex Stainless Steel material providng more options for different industries. Pressure Reducing Valve protecting the ...
DN: 0.5 in
Pressure: 25 bar
Temperature: 70 °C
Pressure gauge push-button valves with DVGW approval, PN 25 / gas max. PN 4 bar SKU MXT-341MSPB Body material Brass-nickel-plated
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C
... orifice. Unique laminar flow design ensures sensitive, repeatable control. Perfect for use in application requiring precision gas metering, and circuit speed or sequencing control. FEATURES • - 3 degree Pin Angle • ...
DN: 0.5 in
Pressure: 20.7 bar
Temperature: 149 °C
... actuated trap) valve. This thermostatic actuator senses the fluid temperature and will modulate the valve open to initiate flow if the temperature falls below the valve’s set point. Once ...
DN: 0.375, 0.5 in
Pressure: 10 bar
Temperature: 66, 149 °C
... TV/HAT-RA-LP, the reverse acting cooling valve actuator modulates the valve open to allow a flow of cool water through the system. If the cooling water temperature is above the valve’s ...
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
... ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material of sample-contacting ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... Needle valve with shutting-off and fine-adjusting function - Compact design for surface mounting - Connections: G 1/4" i - Corrosion-resistant - High level of gas tightness - Material of sample-contacting ...
DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C
Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...
DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C
... in systems with low pressures. Fuels: gaseous Applications: Thermal Power Plants, Steelworks, Biogas & Landfill Gas, Industrial Combustion, Air Separation Plants – PSA NOMINAL ...
Kühme Armaturen GmbH
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 200 °C
... Applications: Thermal Power Plants, Gas Turbines & Gas Compressor Units, Steelworks, Refineries & Petrochemical Plants, Biogas & Landfill Gas, Pipeline & Gas ...
Kühme Armaturen GmbH
DN: 15 mm - 50 mm
Pressure: 21 bar
Temperature: 400 °C
QUICK-CLOSING VALVE TYPE KVF The KVF-Type is part of the KÜHME High-Performance Class. KVF-Valves are especially designed for quick and premium tight shut-off of any type of steam type fluids. This electro ...
Kühme Armaturen GmbH
DN: 65 mm - 300 mm
Pressure: 0 mbar - 1,600 mbar
Temperature: -15 °C - 60 °C
VMH Safety shut off valves, slow opening and fast closing with hydraulic or pneumatic actuator The VMH type valve is a safety shut off valve for gaseous media operated by hydraulic ...
Elettromeccanica Delta S.p.A.
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
... modulating control valves of the newly conceived MDV-D1 series are built according to the EN 161 norms to be used on industrial combustion systems. They are particularly suitable for the proportional regulation of all ...
ECONEX S.R.L.
DN: 2 in - 24 in
... Shut Down Valve) and HIPPS (High Integrity Pipeline Protection System) systems. Fields of application: • Natural gas industry; • Energy; • Petrolchemical industry; • Water transport. Deltaflux ...
PIETRO FIORENTINI
DN: 1 in - 8 in
Pressure: 102 bar
Temperature: -20 °C - 60 °C
CONTROL GAS VALVES Synchroflux Synchroflux valves are bypass and throttling devices suitable for use with previously treated, non-aggressive gaseous fluids. The main characteristics ...
PIETRO FIORENTINI
DN: 300 mm - 600 mm
Pressure: 16, 19 bar
BF 31 BF31 butterfly valves are interception devices for average/low pressure gas pipelines. They may be used also for intercepting liquids when a hermetic seal, low pressure losses and compact construction ...
PIETRO FIORENTINI
DN: 0.25 in - 0.75 in
Pressure: 40 bar
Temperature: -20 °C - 80 °C
Threaded BSP or NPT direct action pressure regulator valve for steam, gases and liquids for reduce pressure in lines available in different materials and pressure ranges self-actuated.
EFSVALVES
DN: 0.5 in - 1 in
Pressure: 16 bar
Temperature: -10 °C - 210 °C
Threaded BSP/NPT or flanged direct action pressure regulator valve for steam, gases and liquids for reduce pressure in lines available in different materials and pressure ranges self-actuated.
EFSVALVES
DN: 0.5 in - 4 in
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 80 °C
Self-actuated flanged or threaded EN or ASA Pressure reducing valve, suitable for liquids for reduce pressure in lines, available in different materials and pressure ranges.
EFSVALVES
DN: 15 mm - 150 mm
Pressure: 2 bar - 40 bar
Temperature: 250 °C
GESTRA control valves V 701 with electric or pneumatic drive For the open and closed-loop control of gas, steam and liquid up to 250 °C. The directly mounted positioner used with the pneumatic drives ...
GESTRA AG
Pressure: 0 psi - 5,500 psi
The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen ...
Generant
DN: 2 mm - 30 mm
This bi-directional valve is ideal for controlling varying flow rates of gas, liquid and slurries. Rangeability in excess of 350 to 1 Cavitation and noise reduction trim available Bi-directional ...
DN: 20 mm - 200 mm
... style control valves, the GS-General Service Valves combines advanced levels of body configuration, trims and actuation to produce a valve assembly capable of premium performance at a ...
DN: 20 mm - 500 mm
The SD-Severe Duty valve is Copes-Vulcans premium severe duty and critical service control valve design. While virtually identical in outward appearance to the Copes-Vulcan legendarily rugged and dependable ...
DN: 17 mm - 59 mm
Pressure: 1 bar - 16 bar
Temperature: -20 °C - 80 °C
2/2-way ball valve with full bore Producer Medium:Compressed air, vacuum, inert gases Material of seal:NBR Material of locking ring:Stainless steel 1.4301 Material of O-ring:NBR Material of retaining ring:Technopolymer Type:valve Price ...
DN: 300 mm - 1,200 mm
Pressure: 500 mbar
Temperature: 400 °C - 850 °C
DESIGN – Welded assembly register specially designed for air and warm gases transport. – Mounting flange, according to ISO 5211 standard: makes easy the mechanichal (gear box), pneumatic, and electric actuator adapting. – ...
TECOFI
DN: 3 mm
Pressure: 0 bar - 200 bar
Brass control valve (e. g. for the pressure regulator outlet) For non corrosive gases and gas mixtures up to qualität 6.0 Suitable for pressures up to 50 bar (control valve) or 200 bar ...
DN: 3 mm
Pressure: 0 bar - 200 bar
... Control- and shut-off valves (e.g. for the pressure regulator outlet) For corrosive, toxic gases and gas mixtures with corrosive components up to quality 6.0 Suitable for pressures up to 50 bar (control ...
DN: 0.375 in - 1 in
3/8 to 1 in. (10 to 25mm) Description: Series GBV 2-Piece Brass Gas Ball Valves are used in residential applications for manufactured natural gas and LP gas on in-house ...
DN: 0.5 in - 2 in
Pressure: 5 bar
Temperature: -5 °C - 60 °C
... heavy-type gas ball valves constructed out of brass. It is used together with a steel pipe, but it can also be used with a copper pipe if the pipe has an ISO 7 male conical fitting. It is ideal to be ...
SFERACO
DN: 15 mm - 50 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
The pinch valves from Ross has a compact and economical design that is utilized for a broad range of applications in the industrial automation industries. It is ideally used for compressed air and other media. It is a ...
ROSS EUROPA
DN: 50 mm - 80 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (01): Aluminum alloy. Threaded cap (03): POM (polyoxymethylene). O-Ring (06): NBR (nitrile rubber). Screw (07): galvanized steel. Sleeve (08): see material selection. Port: Female threads, DIN ...
ROSS EUROPA
DN: 40, 32 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (01), Flange (04): POM(polyoxymethylene). Screw (07): galvanized steel. Sleeve (08): see material selection. Port: Flange, (DIN PN 10/16). Ambient temperature: -20° to +50°C. Media temperature: ...
ROSS EUROPA
Please specify:
Help us improve:
remaining