Schubert & Salzer pneumatic valves

DN: 0.5 in - 6 in
Pressure: 10 bar - 40 bar
Temperature: -46 °C - 400 °C

The AP20P valve belongs to the AP series. It is equipped with metallic seats that permits that engineering of metal seated ball valves. It features ease of maintenance without requiring extra lapping ...

DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C

Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services (AP10HP) ● ...

DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: -46 °C - 400 °C

The AP20P valve belongs to the AP series. It is equipped with metallic seats that permit that engineering of metal seated ball valves. It features ease of maintenance without requiring extra lapping of ...

DN: 0.125 in - 1 in
Pressure: 0.8 bar - 10 bar
Temperature: 0 °C - 70 °C

... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...

DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C

... unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators 041, 042, 043 Unidirectional flow regulator (block shaped) Valves in ...

DN: 0.25, 0.5 in
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C

... made of aluminium pressure die-casting Cup made of metal Thread - DIN 2779 Connection sizes - G1/4“ to G1“ Medium - Compressed air

DN: 100 mm - 400 mm
Temperature: -25 °C - 150 °C

Butterfly valves suitable for intercepting powdered products - Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of ...

DN: 150 mm - 800 mm

Slide gate valves suitable for intercepting products in powder, granules, fibers and heavier materials - Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in ...

DN: 15 mm - 1,000 mm
Pressure: 16 bar - 420 bar

... sized globe valves and segmented control valves offered by other companies. Athena control valves offer fast response times to control signals due to advanced digital control of actuation ...

DN: 40 mm - 300 mm
Pressure: 16 bar - 420 bar

Multil-stage Depress Pressure Control Valve body material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel end connection: operation: PDL pneumatic diaphragm actuator、PCL pneumatic ...

DN: 15 mm - 600 mm
Pressure: 16 bar - 250 bar

Pneumatic gate valve body material: Stainless steel, Carbon steel end connection: RF, BW, RTJ operation: electric /pneumatic/ hydraulic actuators

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C

> - Type: 3X2 > - Design: Spool with Cartridge Type > - Port Size: In/Out/Exhaust -1/4" BSP > - Media:Compressed Air, Filtered & Lubricated > - Ambient/Medium Température: - 5°-60°C > Materials of Construction: Aluminium, ...

DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C

Type - 5X2 Design - Spool with Cartridge Type Port Size - In/Out- 1/4" BSP & Exhaust - l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, Nitrile, Brass, ...

DN: 0.25, 0.125 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C

Type - 5X3 Design - Spool with Cartridge Type Port Size - In/Out/Exhaust - l/4" BSP & Pilot Port l/8" BSP Media - Compressed Air, Filtered & Lubricated Ambient/Medium Température - 5°- 60° C Materials of Construction Aluminium, ...

DN: 150, 200, 250 mm
Pressure: 10 bar

The slide valves from Comav are ideally used to cut-off product flow. They are designed to provide an accurate outside sealing, and can work with powder, granules and ground products. Also, the valves ...

Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and closing. The ...

Knife gate valves are designed to isolate the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and ...

Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C

• Compact series lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment.

Pressure: 1.2 bar - 10 bar
Flow rate: 0 l/min - 300 l/min

Pressure: 13 bar - 50 bar
Temperature: -29 °C - 204 °C

Pressure: 3 bar - 35 bar

DN: 2 in - 12 in
Pressure: 150 psi

SIZE: 2＂～12＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC pneumatic butterfly valve

DN: 2 in - 12 in
Pressure: 150 psi

SIZE: 2＂～12＂ JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI

DN: 0.5 in - 3 in
Pressure: 150 psi

SIZE: 1/2＂～3＂ JOINT END TYPE 1: SOCKET (ANSI /DIN / JIS/ CNS) JOINT END TYPE 2: THREADED (PT/NPT/BSPF) WORKING PRESSURE: 150PSI

DN: 50 mm - 400 mm
Pressure: 1 bar
Temperature: 80 °C

... industry standard. It was the first valve specifically designed for handling dry bulk solid materials, and is “the original” orifice gate valve. Purpose: Prior to the Orifice Gate, conventional knife ...

DN: 150 mm - 610 mm
Temperature: 120 °C

... 400 BHN abrasion-resistant steel, carbon steel Arc Seal Construction Polymer & rubber Drive/Actuation Double-acting air cylinder, electric actuator, hydraulic actuator Position Confirmation Proximity switches

DN: 50 mm - 255 mm
Temperature: 80 °C

... treatment solutions not exceeding 180°F | 80°C Load Seal Construction Silicone rubber Drive/Actuation Double-acting air cylinder Cylinder Construction Aluminum Cylinder Shaft, Barrel Nuts & Tie Rod Construction 303 ...

DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C

The 21IA4T15GC is a 2-way angle seat air operated valve that is capable of providing high flow rates. Its body has been constructed out of stainless steel and it features a corrosion resistant actuator ...

DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C

The actuator features anti water hammer that allows fluid to pass below the seat and an optical position indicator. Its body is made of stainless steel and its corrosion resistant. The rotation is possible up to 360 degrees, and it has ...

DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C

The 21IA-IP1 is a 2-way angle seat air operated valve that is capable of providing high flow rates. Its body has been constructed out of stainless steel and it features a corrosion resistant actuator ...

DN: 0.125 in - 1 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

Series of quick exhaust valves in nickel-plated brass and in stainless steel

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...

DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C

... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...

DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar

... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...

DN: 4 mm - 32 mm
Temperature: -50 °C - 200 °C

Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 1 mm - 6 mm
Temperature: -10 °C - 200 °C

Pneumatic control valve VALVE STYLE Globe valve USAGE Throttling service Low-pressure service On/off service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 1 mm - 6 mm
Temperature: -10 °C - 200 °C

Pneumatic control valve VALVE STYLE Globe valve USAGE Throttling service Low-pressure service On/off service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: 120 °C

Cast iron (GJL 250) PN 16 foot valve Viton gaskets. Made in Italy. Fields of application: Fuel - Diesel - Lubricating.

DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C

Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim max 150°C 13 BAR consolflange for electric actuator. Made in Italy. Fields of application: Industrial plants - Sea water use - Fuel - Aggressive ...

DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C

Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim position indicator drain plug max 150°C 13 BAR. Made in Italy. Fields of application: Industrial plants - Sea water - Fuel - Aggressive fluids ...

DN: 10 mm - 50 mm
Pressure: 10, 16 bar

... NPT threaded connections • Pneumatic actuator DA, NO, NC or with electric motor 230V / 24V • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality industrial ...

DN: 15 mm - 50 mm

... with fluids with small solids without dead spaces in the ball • PVC-U, PP-GF • Possibility of pneumatic actuator DA, NC or electric motor 230V / 24V Ball valve completely injected in one piece, very ...

DN: 65 mm - 150 mm
Pressure: 16, 10 bar

... aggressive liquid or gaseous media if the valve components that contact the media are resistant to the service temperature according to the Divatec resistance list. This model can also be automated with electric or ...

DN: 0.125 in - 0.75 in
Temperature: -10 °C - 70 °C
Flow rate: 310 l/min - 6,300 l/min

This valve can easily vent the circuit in case of an air supply failure. If assembled on the cylinder port, it increases the cylinder speed. DATASHEET Recommended tubings: according to the fitting ...

DN: 0.125, 0.25 in
Pressure: 0 bar - 8 bar
Temperature: 0 °C - 70 °C

... installée! in a pneumatic circuit, the pressure control sets the working pressure of ail the connected components. The pressure adjustment will be thereby kept steatfy for a long time. h can also be used as an economuer ...

DN: 0.125 in - 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 70 °C

The valve is used to section a pneumatic installation. Sliding the sleeve on the rod. both ON and OFF positions can be achieved. When the sleeve is against the rod hexagon. the flcw goes in the arrcw ...

DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C

... Pressure Control Valve provides regulated pressure to operate a variety of Williams pneumatic metering pumps. It features an economical pressure regulator capable of output pressures of 0-125 psi (0-862 ...

Pressure: 6 bar - 10 bar
Temperature: 121, 135, 130, 150 °C

The valve body of the RIEGER aseptic valves is hermetically sealed from the environment, thus ensuring the perfect protection for your liquid product. The pocket-free design of the valve ...

Pressure: 6 bar - 10 bar
Temperature: 150, 130 °C

RIEGER hygienic single seat valves are used, when a maximum level of productivity, safety and quality is requested. They are found in plants of the dairy industry and the food industry. The advanced valve ...

Pressure: 6 bar - 10 bar
Temperature: 130, 150 °C

... of its one-piece valve body and the radial sealing of both valve seats along with the balanced valve disks enable a perfectly safe CIP/ IP cleaning, thus ensuring extremely high security ...

DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C

... soft seal (leakage rate A in acc. with EN 12266-1) Closing of the valve is dampened to reduce pressure surges in the pipeline Double seat – one valve instead of two separate valves ...

DN: 65 mm - 300 mm
Pressure: 40, 35 bar
Temperature: 180 °C

... operating cycles igh-performance valve with extended service life H2-ready OPERATION DETAILS The linear movement of the valve stem is generated by a strong pneumatic actuator ...

DN: 3 in - 12 in
Pressure: 50 bar
Temperature: 225 °C

... operating cycles High-performance valve with extended service life H2-ready OPERATION DETAILS The linear movement of the valve stem is generated by a strong pneumatic actuator ...