Schubert & Salzer pneumatic valves

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 120 °C

Modular design Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devicesions due to special features ...

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: 10 °C - 60 °C

Modular design Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devices Seal materials ...

DN: 10 mm - 80 mm
Pressure: 10 bar
Temperature: 5 °C - 80 °C

Modular design Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devices Seal ...

DN: 0.5 in - 2 in
Pressure: 0.8 bar - 10 bar
Temperature: -10 °C - 180 °C

... Operator Port Connections. More Number Of Gland Packings At Valve End & Operator End For Longer Life. Operator With Threaded / Namur Ports. Lubricated Pilot Air Not Necessary. Applications: Air ...

DN: 0.5 in - 3 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

Pressure Range(Bar): Normally Close -Above P lug : 0-25 | Below plug : 0-25Normally Open : 0-25Universal - Above plug : 0-25 | Below plug : 0-16 Orifice Size (mm): 12 Port Connection: 1/2" MOC: CF8 (SS304 Cast) | CF3M (SS316L Cast) ...

DN: 50 mm - 150 mm

Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The REDEX® slide valve is suitable for the ...

DN: 50 mm - 500 mm

Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The RSV slide valve is suitable for the ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... - Easy to install, even in confined spaces: compressed air inlets with G 1/4” threaded adjustable connections to enable alignment with the piping. PPGR connections prevent any risk of corrosion. - New valve ...

DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...

DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...

DN: 21 mm

... CONTAMINATED AIR UNIQUE MOUNTING The BV21 represents yet another evolution in air valve technology from MAC. The Bullet Valve® utilizes “lifting” solenoid technology. ...

DN: 10 mm

... CONTAMINATED AIR UNIQUE MOUNTING The BV10 represents yet another evolution in air valve technology from MAC. The Bullet Valve® utilizes “lifting” solenoid technology. ...

DN: 14 mm

... CONTAMINATED AIR UNIQUE MOUNTING The BV14 represents yet another evolution in air valve technology from MAC. The Bullet Valve® utilizes “lifting” solenoid technology. ...

DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C

Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to obtain ...

DN: 0.125 in - 0.25 in
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 60 °C

The selective valve is mainly used to guide or control two different inputs which either chooses one or another but uses only a single a way out.

Pressure: 2 bar - 10 bar
Temperature: -10 °C - 70 °C

The quick exhaust valve allows to exhaust the air in the cylinder to increase the speed. We suggest the mounting directly on the cylinder’s supply

DN: 63 mm - 110 mm

BASIC HYDRAULIC VALVE Hydraulically or Pneumatic operated. TYPICAL APPLICATIONS Irrigation, water treatment, animal feeding plants.

DN: 63 mm - 110 mm

HYDRAULIC MANUAL VALVE Hydraulically or Pneumatic operated. TYPICAL APPLICATIONS Irrigation, water treatment, animal feeding plants.

Pressure: 1.5, 3.5 bar
Temperature: -20 °C - 120 °C

... outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral ...

Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C

... outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral ...

Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 120 °C

... outside Low construction height Flange drillings available to PN1O,ANSI l5Olbs Manual (handwheels chainwheels.bevelgeras)or pneumatic version available InstallatIon posthon up to 30 to the horizontal The integral ...

DN: 40 mm - 250 mm
Pressure: 17.2 bar

... and resets locally. When the pneumatic dry pilot detection line is exposed to flame heat, its automatic fire sprinklers shatter-open, while venting the air pressure from the FDV-DP0’s actuator, commanding ...

... ensures high flowrates with minimum head loss * The valve trips open automatically upon a gradual release of water pressure from its control chamber.The valve is actuated by Dry Pilot Line’s pneumatic ...

Introducing FPS-SIPO: the pinnacle of precision control for pneumatic systems. FPS-SIPO, standing for Single Interlock, Pneumatic, Local, is meticulously engineered to seamlessly integrate into industrial ...

SMBA PNEUMATIC MODEL based on SMB The gear transmission mechanism inside of unit is based on that of the SMB model. Air motor is driven and operated by a supply of air, and SMBA is ideal for use in ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 10 °C - 55 °C

special ball valve completely moulded in place extremely low clearance volume high operating reliability - high torque transmission due to generously dimensioned stem excellent flow characteristics

DN: 12 mm - 15 mm
Pressure: 6 bar

compact design with high flow capacities integrated lift limitation visual position indicator ideal for realising switching functions in restricted installation spaces

DN: 15 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C

Material sealing element (in contact with medium): EPDM | FPM reliable and economical good control characteristics high kv value visual position indicator

DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C

... Coil: The solenoid valve has an electromagnetic coil wrapped around a ferromagnetic core. When an electrical voltage is applied to the coil, it generates a magnetic field around the core. Armature or piston: Inside the ...

DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C

... monitor and adjust the valve position as needed. Fluid Flow: When the engine opens the valve, fluid can flow through the valve opening. The size of the opening can be adjusted continuously ...

DN: 4, 6, 8, 10 mm
Pressure: 0.2 MPa - 1 MPa
Temperature: 0 °C - 60 °C

Industry's First! (Patent no. 5578502) The function of a shock absorber is built in a speed controller. Two-stage exhausting flow rate adjustment make the same control as a cylinder with a shock absorber possible. No more cylinder ...

DN: 3 mm - 12 mm
Pressure: 0.1 MPa - 1 MPa
Temperature: 0 °C - 60 °C

Flow rate can be set with indicator. Reducing the task of initial flow settings or their maintenance / replacement. The scales are on the side (upper / lower) and the top. Flow rate is proportional to the knob turns. 2 types with ...

DN: 6, 8, 10, 12 mm
Pressure: 0.1 MPa - 0.7 MPa
Temperature: 0 °C - 60 °C

Large-flow type Speed Controller for driving device. Best suitable for high-speed operation cylinder. Large-Flow type with same size as Speed Controller series. For price options, please contact our distributor near your office. ...

DN: 0.5 in - 2 in

INDUSTRIAL USE Spring return or double effect pneumatic actuator 3-way FFF BRASS ball valve, full bore See the above-mentioned diagram. In the opening phase, the actuator provides a decreasmg ...

DN: 8 mm - 100 mm

PNEUMATIC VALVE – 2 WAY FF BRASS INDUSTRIAL USE Spring return or double effect pneumatic actuator 2-way FF BRASS ball valve, full bore The Pneumatic ...

DN: 8 mm - 100 mm

PNEUMATIC VALVE – 2 WAY FF AISI 316 INDUSTRIAL USE Spring return or double effect pneumatic actuator 2-way FF AISI 316 ball valve, full bore ACCESSORIES ON ...

DN: 20 mm - 500 mm

The SD-Severe Duty valve is Copes-Vulcans premium severe duty and critical service control valve design. While virtually identical in outward appearance to the Copes-Vulcan legendarily rugged and dependable ...

DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C

Description Compact positioner with analogue control. Compressed air for remote control necessary. The stroke is made proportional to the flow through the paraboüc contour of the piston. The valve shuts ...

Pressure: 0 bar - 40 bar
Temperature: 95 °C

Externally controlled valve for the hydrogen sector Valves for hydrogen and oxygen in electrolyser operation Pneumatically operated 2/2-way valve - Direct pressure ...