Schubert & Salzer process valves

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...

DN: 0.5 in - 3 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

Pressure Range(Bar): Normally Close -Above P lug : 0-25 | Below plug : 0-25Normally Open : 0-25Universal - Above plug : 0-25 | Below plug : 0-16 Orifice Size (mm): 12 Port Connection: 1/2" MOC: CF8 (SS304 Cast) | CF3M (SS316L Cast) ...

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...

DN: 0.25 in
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 70 °C

The rossignol metering valve will be fitted di- rectly to the cylinder valve. Due to the slim conus of the metering spindle the rossignol valve guarantees precise metering. As an ...

DN: 3 mm
Pressure: 300, 40 bar
Temperature: -20 °C - 70 °C

HP 500 is a metal diaphragm shut-off valve. Diaphragm shut-off valves are system components for central gas supply units and can be used for low pressure as well as for high pressure.

DN: 0.25, 0.375 in
Pressure: 0 bar - 40 bar
Temperature: -20 °C - 70 °C

The 90° shut-off valve HP 501 is a shut-off for point of use regulators. The HP 501 is a shut-off valve will be used with pressure regulator HP 410 as a point of use regulator for laboratory benches ...

DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: -10 °C - 110 °C

2 way MM BRASS Diamant ball valve 2-way MM BRASS with caps and tangs Full bore PN16 Code - Size - DN - PN - KVS DC2A2A - 1/2" - 15 - 16 - 16,3 DC2B2A - 3/4" - 20 - 16 - 29,5 DC2C2A - 1" - 25 - 16 - 43

DN: 3 in
Pressure: 230 mbar - 8,000 mbar
Temperature: 60 °C

... Vaive opens and closes automatically. - - No residual liquid in pipe at the end of loading process. - - The operator cannot leave the pump during the refuellinq process. * Flow and Turbolence should ...

DN: 15 mm - 65 mm
Pressure: 0 bar - 10.2 bar
Temperature: 0 °C - 180 °C

... position feedback signal 0-10 V / 4-20 mA (after automatic balance) Control element 2-port/2-way valve, NC (normally closed) as standard, as option 3-port/2-way valve for mixing different media, with ...

DN: 0.5 in - 6 in
Pressure: 16 bar
Temperature: -46 °C - 400 °C

... series is a line of ball valves manufactured by Penta. It offers an efficient solution for high-temperature fluid handling with reliability and capability. The ball valves are also produced with quality, ...

DN: 0.5 in - 3 in
Pressure: 63 bar - 100 bar
Temperature: -46 °C - 400 °C

The AP20P is a valve that belongs to the AP series. It is equipped with metallic seats that permit the engineering of metal seated ball valves. It features ease of maintenance and it does not require ...

DN: 0.5 in - 1.5 in
Pressure: 160 bar
Temperature: -46 °C - 400 °C

The AP609 is a metallic ball valve. It integrates the reliability and the capability in finding the right answer to the high temperature liquid handling problems on all Penta metal seated ball valves. The ...

DN: 50 mm - 900 mm
Pressure: 16 bar - 250 bar

... Entry ball valve body material: Carbon steel /Stainless steel / Alloy steel /Special ( Monel /Inconel /Hastelly etc.) end connection: RF/RTJ/BW operation:Lever Gear motor/pneumatic actuators product overview:Athena ...

DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar

... soft-seated trunnion mounted ball valves are designed according to API6D standard and be offered two-piece and three-piece split body designs. The valves can be applied in wide pressure and temperature ...

DN: 50 mm - 2,400 mm
Pressure: 16 bar - 420 bar

... eccentric butterfly valve, with two-way sealing zero leakage, small torque characteristics, metal sealing valve seat can make it suitable for all kinds of harsh working conditions, the eccentric design ...

... internal pilot type chemical 2-3 port valve that does not transmit heat to fluid. Up to two air-operated valves can be controlled simultaneously by a single solenoid valve. Perfect ...

DN: 0.375 in

Electro-Pneumatically operated pinch valve Low power 1.3W, high pinching force for 3/8" Silicon tube. other on request pharma, analyses, instrumentation

DN: 50 mm - 1,600 mm
Pressure: 10 bar - 100 bar
Temperature: -196 °C - 550 °C

... customer requirements valves in higher pressure classes, larger sizes and other materials are offered. The range comprises valves for cryogenic services also. The metal-seated valves ...

DN: 15 mm - 150 mm
Pressure: 10, 16 bar

Forged Carbon Steel Ball Valve Manufacturer: Forged Ball Valves, Carbon Steel, 1/2-6 Inch, 150 LB, Wafer Ends, BS 5351, ASME B16.34, DIN 3357, ASME B16.5. MED Wafer Ball Valves are ...

DN: 0.5 in - 24 in
Pressure: 16 bar - 420 bar

Cryogenic Globe Valve Supplier: BS 1873, ASME B16.34, DIN 3202 Cryogenic Globe Valves, 1/2-24 Inch, 150-2500 LB, PN16-PN420, Flanged, Threaded, Welded Ends. Med Cryogenic Globe Valves ...

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...

DN: 25 mm - 1,200 mm
Pressure: 2.5 bar - 100 bar
Temperature: -45 °C - 200 °C

Di Nicola manufactures ball valves type floating and trunnion mounted alloy carbon steel ASTM 216 WCB / GP 240GH + N and stainless steel with high nickel content ranging in size and nominal pressures in accordance with ...

DN: 40 mm - 1,200 mm
Pressure: 2.5 bar - 16 bar
Temperature: -10 °C - 120 °C

Di Nicola manufactures single eccentric butterfly valves type lug, wafer and flanged in ductil iron EN GJS 400 to EN GJS 500 , malleable cast iron GJL 250 and high- nickel NI resist , carbon steel ASTM 216 WCB / N + GP ...

DN: 2 mm - 32 mm
Temperature: -196 °C - 550 °C

Pneumatic control valve VALVE STYLE Ball valve USAGE Low-pressure service On/off service High-pressure service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 1 mm - 8 mm
Temperature: -10 °C - 200 °C

... control valve VALVE STYLE Ball valve USAGE Low-pressure service On/off service VERSION ANSI SUPPLY Pneumatic VALVE SIZE PRESSURE RATING Class ...

DN: 15 mm - 200 mm
Temperature: -10 °C - 200 °C

... control valve VALVE STYLE Ball valve USAGE Low-pressure service On/off service VERSION DIN SUPPLY Pneumatic VALVE SIZE PRESSURE RATING PN 10 to ...

DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C

Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN ...

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C

Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning systems (HVAC) ...

... water valves, micro-valves, magnetic valves, mechanical valves, pneumatic valves. Check valves are available with various connections ...

DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C

... soft seal (leakage rate A in acc. with EN 12266-1) Closing of the valve is dampened to reduce pressure surges in the pipeline Double seat – one valve instead of two separate valves ...

DN: 25 mm - 300 mm
Pressure: 60 bar
Temperature: 60 °C - 280 °C

... operating cycles High-performance valve with a extended service life Optimised for use with chemical process media with a broad temperature range H2-ready OPERATION DETAILS The linear movement ...

DN: 300 mm - 3,000 mm
Pressure: 16 bar
Temperature: -25 °C - 300 °C

SAFETY QUICK-CLOSING BUTTERFLY FLAP VALVE TYPE PKIII Being part of the proven KÜHME high-performance valve series for industrial applications, the PKIII type is used in any application where safe and ...

DN: 8 mm - 20 mm
Pressure: 160, 100 bar
Temperature: -50 °C - 225 °C

INTEC K110 Mini plant ball valve with female threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to DIN 3202 part 4-M3 ...

DN: 8 mm - 20 mm
Pressure: 100, 160 bar
Temperature: -50 °C - 225 °C

INTEC K120 Mini plant ball valve with male threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to producers standard ...

DN: 15 mm - 200 mm
Pressure: 16, 40 bar
Temperature: -29 °C - 225 °C

INTEC K200 Flanged ball valve, floating ball, soft seated. Features nominal sizes DN 15 - DN 200 nominal sizes NPS 1/2" - NPS 8" two-piece split body soft seated floating ball FTF dimensions ...

DN: 50 mm - 600 mm
Pressure: 1 bar - 10 bar

The type C Knife Gate Valve for bulk material is a unidirectional wafer valve which was designed especially for bulk material technology (powder or granulated materials). The Knife Gate Valve ...

DN: 20 mm - 200 mm

... style control valves, the GS-General Service Valves combines advanced levels of body configuration, trims and actuation to produce a valve assembly capable of premium performance at a ...