SMS - TORK ball valves

DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C

... 2-way ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material ...

DN: 10 mm - 50 mm
Pressure: 10, 16 bar

... • Box with limit switches position indication (electromechanical and / or inductive) Advantage • High quality industrial valves • Flexible modular system with a wide range of variants • Reliable material combinations ...

DN: 15 mm - 100 mm
Pressure: 10, 16 bar
Temperature: -20 °C - 100 °C

• BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • ...

DN: 15 mm - 50 mm

... spaces in the ball • PVC-U, PP-GF • Possibility of pneumatic actuator DA, NC or electric motor 230V / 24V Ball valve completely injected in one piece, very small dead space, high value ...

DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C

Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...

DN: 6.35 mm
Pressure: 250, 160 psi
Temperature: -29 °C - 66 °C

... Pressure Control Valve provides regulated pressure to operate a variety of Williams pneumatic metering pumps. It features an economical pressure regulator capable of output pressures of 0-125 psi (0-862 Kpa). The Pressure ...

DN: 0.25 in - 1.5 in
Pressure: 250 bar
Temperature: -10 °C - 80 °C

DN: 0.25 in - 1.5 in

DN: 100 mm

... production of fine chemicals, on the other hand, our ball valves are used within the production lines of the pharmaceutical industry or cosmetics industry. The precise end stops of the Böhmer multi-way ...

DN: 450 mm - 1,400 mm
Pressure: 16 bar
Temperature: -180 °C - 650 °C

Ball valves are often subjected to extreme conditions, especially when used in pipelines. To withstand even the highest loads, Böhmer ball valves are therefore welded ...

DN: 3 mm - 1,400 mm
Pressure: 10 bar - 800 bar
Temperature: 180 °C - 650 °C

Split body ball valves up to a nominal diameter of 56 inch are a integral component part of the Böhmer product line. Ball valves of this design are well suited for extremely ...

DN: 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

The SLT circuit switch allows to convey two pneumatic signals into one way, keeping the two pneumatic sources separated. They have aluminium body, NBR seals and brass components and are available with 1/8” and 1/4" ports. CONSTRUCTIVE ...

DN: 0.5, 0.25, 0.125 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

UM series one way valves are used when there is the need to keep under pressure one tube, allowing, at the same time, the flow if air to one way.

DN: 0.5, 1, 0.125, 0.25 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

Quick exhaust valves SR are used to exhaust the pressure of the chambers of a pneumatic cylinder directly into the atmosphere, growing the speed of the cylinder to the maximum. They have the body and the components ...

DN: 500 mm - 2,200 mm
Pressure: 10 bar - 100 bar

Ball and Spherical Valves Mainly used in hydroelectric power plants when high values of flow rate speed and/or pressure rating are required. Functions ■ maintenance operation ■ emergency / safety ...

DN: 0.5, 0.75, 1 in
Pressure: 250 psi
Temperature: 400 °F

The Motorized Ball Valve delivers a torque of 150 in-lbs using a non-reversing motor, opening the valve in 5 seconds and minimizing pressure hammer. The motor is protected in a NEMA 4X ...

DN: 2 mm - 30 mm

This bi-directional valve is ideal for controlling varying flow rates of gas, liquid and slurries. Rangeability in excess of 350 to 1 Cavitation and noise reduction trim available Bi-directional ...

Temperature: 454, 565 °C

The DSCV-SA is generally used for Turbine Bypass applications where the valves typically remain closed for long periods of time to isolate steam flow.: Cast & fabricated design. Wide size configuration Extremely ...

DN: 2 in - 30 in

This valve offers the highest Cvs of any competitive valve in the wide open position, yet gives modulating control over the full range of travel. Features This bi-directional valve ...

DN: 0.15 in - 1 in
Pressure: 10 bar
Temperature: 93 °C

Combines three valves in one: Isolation Valve, Check Valve and Companion Flange Free floating flange allows easy alignment and installation of pumps Prevents gravity circulation Isolates ...

DN: 0.75 in
Flow rate: 9 us gal/min

... hydronic systems utilizing zone valves Controls excess flow in the system when there is reduction in demand Available in ¾” connection All brass body with non-ferrous internals The differential bypass ...

DN: 2 in - 12 in

... direct mounting pad to ISO 5211 • 6” and larger valves are equipped with lifting lugs • 8” and larger valves can be equipped with vent and drain valves (Optional) • Antistatic grounding ...

DN: 2 in - 12 in
Pressure: 420 bar

Special mechanical design and construction Solid one-piece high torque durable stem. Tight stem-to-ball directional engagement, ensures relief hole alignment. Strict materials and manufacturing tolerances control. Efficient ...

DN: 0.25 in - 8 in
Pressure: 1,494 psi

... lower operating torque. Special mechanical design and construction Solid one-piece high torque durable stem. Tight stem-to-ball directional engagement, ensures relief hole alignment. Strict materials and manufacturing ...

DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316

DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M

DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible

DN: 3, 5.5 mm
Pressure: 20 bar
Temperature: -20 °C - 80 °C

2/2-way socket ball valve Micro brass design chromed with connection connector and male R-thread Producer Material of casing: Brass chromed Material of ball: Brass hard-chromium ...

DN: 15 mm - 76 mm
Temperature: -10 °C - 170 °C

2/2-way ball valve brass design nickel-plated in medium heavy design with female G-/R-thread Producer Material of casing: Brass nickel-plated Material of ball: Brass hard-chromium ...

DN: 10, 15, 20, 25 mm
Temperature: -20 °C - 150 °C

2/2-way ball valve brass design nickel-plated with butterfly handle with male thread Producer Function principle: 2/2-ways Actuation type: manually Material of casing: Brass nickel-plated Material ...

DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C

... Anfrage Contact travel 0°; 90° Surface burnished Material Steel housing, ball and operating shaft POM ball seal NBR O-ring

DN: 6 mm - 38 mm
Pressure: 400 bar
Temperature: -20 °C - 60 °C

... Temperaturmöglichkeiten auf Anfrage Contact travel 0°; 90° Material Stainless steel housing, ball and operating shaft POM ball seal NBR O-ring

DN: 6 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 150 °C

... 0°; 90° Surface nickel plated Material Brass housing Aluminium handle Brass ball, hard chrome-plated PTFE ball seal