Spirax Sarco manual valves

DN: 12, 6 mm
Pressure: 0 bar - 500 bar
Temperature: -20 °C - 60 °C

C2.940 High-pressure shut-off valves C2.940 High-pressure shut-off valves max. operating pressure 500 bar nominal diameter: ND 6 and 12 temperature range: 40º ... + 100ºC ports: G1/4 or G1/2

Pressure: 350 bar

C2.940 Flow control valve with locking screw C2.940 Flow control valve with locking screw max. operating pressure 350 bar nominal diameter: ND 4 .. 12 ports: G1/8 .. G1/2

Pressure: 10 bar
Temperature: -30 °C - 130 °C

... casting iron which has a 10 bar working pressure and a working temperature that ranges from -30...130 C degree. The valve contains a hand and an actuated control. Meanwhile, airconditioning technology, ...

Temperature: -10 °C - 95 °C

Tork's T-PKV .W812 is a butterfly valve which is made up of PVC with an extensive pressure of 10 bar and a maximum temperature that ranges from -10 up to 95° C. The unit has EPDM,VITON for its seal. The butterfly valve ...

Pressure: 10 bar
Temperature: -30 °C - 130 °C

The TORK T-KV.W 1320 series wafer type butterfly valve is constructed using stainless steel materials for its base and AISI 316 or 304 for its disc fitting. It generates 10 bar pressure rating, and works under -30 to ...

DN: 50.8, 76.2, 127, 38.1 mm

HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...

3-Way and 6-Way Ball Valves Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, which are limited ...

DN: 1.5 in - 8 in
Pressure: 0 psi - 5 psi
Flow rate: 0 us gal/min - 2,000 us gal/min

HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize ...

DN: 6, 14, 8, 10 mm
Pressure: -1 bar - 20 bar
Temperature: -30 °C - 130 °C

FEMALE RP ISO 7 - FEMALE RP ISO 7 VALVE The GHILUX miniature ballvaves have been created and engineered by Aignep in the 90’s. The supercompact dimensions and the excellent performance respond to the growing demand ...

DN: 10, 6, 14, 8 mm
Pressure: -1 bar - 20 bar
Temperature: -30 °C - 130 °C

TAPER MALE R ISO 7 - FEMALE RP ISO 7 VALVE The GHILUX miniature ballvaves have been created and engineered by Aignep in the 90’s. The supercompact dimensions and the excellent performance respond to the growing demand ...

DN: 5.5 mm
Pressure: -1 bar - 40 bar
Temperature: -15 °C - 180 °C

FEMALE RP ISO 7 - FEMALE RP ISO 7 VALVE The 66.000 serie is made of stainless steel AISI 316L function fittings: flow controls for cylineders, in-line and banjo fittings, unidirectional valve, quick ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...

Pressure: 10 bar - 500 bar

max. operating pressure 500 bar, min. operating pressure 10 bar. Type of actuation: manual Application: For single acting cylinders. CETOP 3 adaptation.

DN: 6 mm

The hand valve provides bubble tight shut-off time after use. The valve is directly attached into the plate with O-ring seal.

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 80 °C

... nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with ...

DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -10 °C - 50 °C

... the union nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS ...

DN: 10 mm - 80 mm
Pressure: 10 bar
Temperature: -10 °C - 50 °C

... the union nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS ...

DN: 6, 8, 4 mm
Pressure: 0.2 bar - 10 bar
Temperature: 5 °C - 80 °C

... CONTROL VALVES - WITH SWIVEL JOINT ► Configurable flow control valves for regulating the exhaust air ► Optimal for regulating the speeds during piston movements ► Angled version FLOW CONTROL VALVES ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ...

DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...

DN: 65 mm - 100 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C

... developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs required ...

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

... pneumatic rotary actuator. Gas ball valves are mainly used to shut off the gas flow in gas trains or gas installations before and after other equipment like gas pressure regulators, gas meters etc. These ball valves ...

DN: 2.5 mm
Pressure: 2 bar - 10 bar
Temperature: 0 °C - 60 °C

Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual. Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two ...

DN: 0.375, 0.5, 0.125, 0.25 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 60 °C

They are ON/OFF valves for various application areas: air, water and hydraulic circuits, and it’s also possible the use for pneumatic vacuum.

DN: 0.25 in
Pressure: 5,000 psi

Multiple-turn flow restrictor valves Features Hytec’s Needle Valves are multiple-turn flow restrictor valves which provide finely adjustable flow control for components or circuits ...

DN: 0.25 in
Pressure: 5,000 psi

High Pressure Ball Valves Designed for shifting under high differential pressures Features These two new high pressure ball valves provide full unrestricted flow and positive shut-off of fluids under ...

DN: 50 mm - 1,400 mm
Pressure: 16 bar - 420 bar

... soft-seated trunnion mounted ball valves are designed according to API6D standard and be offered two-piece and three-piece split body designs. The valves can be applied in wide pressure and temperature ...

DN: 50 mm - 2,400 mm
Pressure: 16 bar - 420 bar

... eccentric butterfly valve, with two-way sealing zero leakage, small torque characteristics, metal sealing valve seat can make it suitable for all kinds of harsh working conditions, the eccentric design ...

DN: 50 mm - 2,400 mm
Pressure: 16 bar - 100 bar

... eccentric butterfly valve, using elastic pressure self-sealing valve seat structure, with two-way zero leakage and can achieve lower torque, reduce the cost of driving device procurement. Cam effect type ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar

... Bi-directional zero leakage butterfly valve.ISO Pad for mounting, Gear Operator /ActuatorExtremely small play between the stem and disc due to ‘Double D’ drive.Accurate dual stem sealing prevents leakage.Butterfly valve ...

DN: 50.8, 3, 4 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 140 °C

... Bi-directional zero leakage butterfly valve.ISO Pad for mounting, Gear Operator /ActuatorExtremely small play between the stem and disc due to ‘Double D’ drive.Accurate dual stem sealing prevents leakage.Butterfly valve ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar

Butterfly Valve Bi-directional zero leakage butterfly valve.

DN: 2 in - 8 in
Pressure: 0 bar - 284.4 bar

... FVF, a Foot Valve with Strainer and clean lever that make removing of debris easy. It is used in any water pump system pipelines, also served as a check valve function to prevent backflow. What is ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 20 bar
Temperature: -15 °C - 80 °C

Model ATRF, This model include a manual lever for quick release action in urgent situations. Suitable for UL Fire protection and Fire Sprinkler air venting systems. Air Vent Valve for Fire Protection ...

DN: 2 in - 12 in
Pressure: 300 psi
Temperature: 0 °C - 80 °C

Model HBF-300G , UL Listed Grooved Type Butterfly Valve, cuts or regulates the flow of fluid through the piping systems. Grooved Type Butterfly Valve for fire protection serve as a control valve ...

DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C

Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN ...

DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C

Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim max 150°C 13 BAR consolflange for electric actuator. Made in Italy. Fields of application: Industrial plants - Sea water use - Fuel - Aggressive ...

DN: 40 mm - 300 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C

Cast iron (GJL 250) PN 16 gate valve flat body inside screw bronze trim position indicator drain plug max 150°C 13 BAR. Made in Italy. Fields of application: Industrial plants - Sea water - Fuel - Aggressive fluids ...