Spirax Sarco stainless steel valves

DN: 10 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 90 °C

Series of brass ball valves full bore with long lever and manually operated. In line mounting they work to close or open the air flow in both directions. In nichel-plated brass and in stainless steel.

DN: 0.125 in - 1 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

Series of quick exhaust valves in nickel-plated brass and in stainless steel

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

Di Nicola manufactures rising and non rising stem cast steel valves in carbon steel ASTM 216 WCB/GP 240GH+N and stainless steel with high nickel alloys ...

DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C

... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...

DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar

... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...

Pressure: 0 psi - 180 psi
Temperature: -40 °C - 93 °C

The NV-30 series is a precision adjustable flow control used in pneumatic and fluidic systems. 303 Stainless Steel construction provides excellent corrosion resistance. Flow control needle has 7 to 8 ...

DN: 1 mm - 8 mm
Temperature: -10 °C - 200 °C

... control valve VALVE STYLE Ball valve USAGE Low-pressure service On/off service VERSION ANSI SUPPLY Pneumatic VALVE SIZE PRESSURE RATING Class ...

DN: 2 mm - 16 mm
Temperature: -35 °C - 200 °C

Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 2 mm - 48 mm
Temperature: -23 °C - 125 °C

Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 0.5, 0.75 in
Pressure: 20.7 bar
Temperature: 149 °C

The HAT/FP is a reliable and automatic freeze protection valve designed to protect water resupply lines from freezing. This thermostatic valve controls flow based on temperature variations to prevent ...

DN: 0.5, 0.75 in
Pressure: 10.3, 6.9 bar
Temperature: 149 °C

... Protection Valve is installed into the lowest point within the heated system. The thermal actuator is tee’d into the NPT threaded opening with adequate internal clearance to monitor the water temperature. When the water ...

DN: 0.5 in
Pressure: 20.7 bar
Temperature: 149 °C

... actuated trap) valve. This thermostatic actuator senses the fluid temperature and will modulate the valve open to initiate flow if the temperature falls below the valve’s set point. Once ...

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C

Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment ...

DN: 40 mm - 300 mm
Pressure: 10 bar
Temperature: 150 °C

Cast iron (GJL 250) PN 10 gate valve flat body OS&y; stainless steel (AISI 304) trim 150°C (max)

DN: 50 mm - 600 mm

• DIN or ANSI flange connections • Robust, stainless steel shaft 304 • Manufactured in PVC-U body. PP / PP-GF • Gaskets in EPDM or FPM • Possibility of electric motor or pneumatic actuator DA, NA, ...

DN: 50 mm - 400 mm
Pressure: 6, 10 bar

• Robust with stainless steel shaft. AISI 304 with double seal PTFE or AISI316 • Joints in EPDM or FPM • PVC-U, PP and PVDF materials • Actuation by manual lever or reducer steering wheel • Possibility ...

DN: 50 mm - 600 mm
Pressure: 6, 5 bar

• Robust with stainless steel shaft. AISI 304 with double PTFE or AISI 316 seal • Gaskets in EPDM or FPM • Materials PVC-U, PP and PVDF • Actuation by manual lever or reducer steering wheel • Possibility ...

Stainless steel butterfly valve, material: S.S.304,S.S.316. We can offer this stainless steel butterfly valve according with SMS, DIN, ...

DN: 0.375 in
Pressure: 200 bar
Flow rate: 20 l/min

FR1-06-KD is an accurately regulating flow restrictor with an integrated non-return valve. It is made of stainless steel W.St.1.4301 and designed for both oil and water hydraulics. Suited ...

DN: 15 mm - 200 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 260 °C

INTEC K224 Flanged ball valve, floating ball, single side spring loaded seat ring, PEEK seated. Features nominal sizes DN 15 - DN 200 nominal sizes NPS 1/2" - NPS 8" two-piece split body PEEK seated floating ...

DN: 8 mm - 20 mm
Pressure: 160, 100 bar
Temperature: -50 °C - 225 °C

INTEC K110 Mini plant ball valve with female threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to DIN 3202 part 4-M3 ...

DN: 8 mm - 20 mm
Pressure: 100, 160 bar
Temperature: -50 °C - 225 °C

INTEC K120 Mini plant ball valve with male threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to producers standard ...

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 130 °C

... tanks etc. They are manufactured from deep-drawn stainless steel featuring excellent corrosion resistance. The valve cone can be fitted with a soft or metallic seal. Top ...

DN: 20 mm - 150 mm
Pressure: 16 bar
Temperature: 110 °C

single-seat feed valve of angle design | body made of GG-25, GGG-40 | incl. lever and float made of CrNiMo-steel, proven technology that requires no external energy | parallel guidance available

DN: 40 mm - 80 mm
Pressure: 16 bar
Temperature: 130 °C

... immediately results in a changed flow volume. NV 98 is a float valve for horizontal installation inside a tank as inlet valve with outlet at the bottom. This valve is made entirely of ...

DN: 0.5 in - 1 in
Pressure: 16 bar
Temperature: -10 °C - 210 °C

Threaded BSP/NPT or flanged direct action pressure regulator valve for steam, gases and liquids for reduce pressure in lines available in different materials and pressure ranges self-actuated.

DN: 50 mm - 250 mm
Pressure: 10 bar
Temperature: 150 °C

The float valve is direct action device, the float or buoy is acting by the thrust of the fluid that finally is transmitted to the valve arm and closing seat. Valves are available in ...

DN: 0.5 in - 2.5 in
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 250 °C

Self-actuated flanged or threaded EN or ASA Pressure reducing valve, suitable for steam, gases and liquids for reduce pressure in lines, available in different materials and pressure ranges.

DN: 10 mm - 600 mm

Pinch valves can be used in a variety of applications due to the wide range of materials used for the body and flanges/socket end covers on a pinch valve, such as aluminium, steel, stainless ...

DN: 25 mm - 150 mm
Pressure: 6 bar

... air operated pinch valves can also be provided in compliance with DIN 11853-2 and DIN 11864-2 Form A. Air Pinch Valve, VMC Series, Stainless steel design, ANSI B 16.5-150lbs Air ...

DN: 40 mm - 300 mm
Pressure: 4, 3, 6 bar

... operated pinch valves: A powder-coated aluminium flange An aluminium flange with steel bushing that comes into contact with the product, powder-coated for more abrasive applications An aluminium ...

DN: 0.75, 0.5 in
Pressure: 150, 300 psi
Temperature: 358, 550 °F

... Control Four-V Port Globe Valves are equipped with a micrometer dial and pointer which enables the valve to set within 1/100th of a turn of the handwheel. This allows you to fine-tune the blowdown flow ...

DN: 50, 65, 80 mm
Pressure: 0.5 bar - 1.5 bar
Temperature: -20 °C - 80 °C

The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...

DN: 0.25 in - 0.5 in
Pressure: 7,250 psi

... 100% shell & inline leak tested Marine classification (on demand): DNV GL, LR, BV, ABS, KR, RINA, others Materials Stainless steel body & ends All materials compatible for Hydrogen use

DN: 0.5 in - 1 in
Pressure: 15,000 psi

... ISO 19880-3:2018 Gaseous hydrogen – fueling stations valve 100% shell & inline leak tested Marine classification (on demand): DNV GL, LR, BV, ABS, KR, RINA, others Materials Stainless steel ...

DN: 0.25 in - 6 in
Pressure: 3,700 psi
Temperature: 650 °C

... seat design is comprised of a metal housing and polymer insert machined as a single unit which provides bubble tight shut-off (Rate A), combined with lower operating torque. Materials: Stainless Steel, ...

DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316

DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M

DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible

DN: 15, 20 mm
Pressure: -1 bar - 16 bar
Temperature: -20 °C - 80 °C

... -way ball valve with male thread Producer Medium: Compressed air, vacuum, inert gases Material of casing: Brass nickel-plated Material of nut: Brass nickel-plated Material of seal: NBR Material of locking ...

DN: 17 mm - 59 mm
Pressure: 1 bar - 16 bar
Temperature: -20 °C - 80 °C

2/2-way ball valve with full bore Producer Medium:Compressed air, vacuum, inert gases Material of seal:NBR Material of locking ring:Stainless steel 1.4301 Material of O-ring:NBR Material ...