Width: 1,050 mm - 2,250 mm
The Eddy Current Separator (R-SPM) is able to separate the Non-Ferrous metals from the rest of the materials due to its studied magnetic assembly called the “Inductor Drum”, which rotates at high speed. When a Non-Ferrous ...
Regulator Cetrisa
Width: 500 mm - 1,800 mm
Non-Ferrous Metals Eddy current Separator Eccentric (R-SPM-E) is able to separate the non-ferrous metals from other materials thanks to its studied magnetic drum set called inductor, which rotates at high speed. When ...
Regulator Cetrisa
Width: 1,050 mm - 1,950 mm
... material made up of cans and briks1 that are previously separated from the general flow of the Municipal Solid Waste by means of an Eddy Current Separator. The cans undergo the most influence and are ...
Regulator Cetrisa
Flow: 70, 100, 130, 170, 200 m³/h
Length: 7,750 mm
Width: 2,392, 3,246, 4,100, 4,954 mm
Size, density and shape: the ballistic separator is an essential equipment in the treatment line, specifically designed to separate the input solid waste depending on these three features Widely known ...
Protect your scrap removal and processing system from metal solids. The tramp metal separator is primarily used with a PRAB Chip Processing system for removing bar-ends, broken tooling and other solids ...
Flow: 5 us gal/min - 315 us gal/min
... Compliance The magnetic separator is a highly efficient fluid filtration method that removes high levels of ferrous contaminants from liquid, helping with recycle and reuse goals. Low Maintenance The magnetic separator ...
Increase Coolant Life, Reduce Coolant Purchases. The PRAB Drum-Type Scraper Separator provides high-quality separation that is applicable to aluminum, non-ferrous, and composite materials. The unit does not consume ...
Length: 100 mm - 500 mm
Weight: 385 g - 3,155 g
... impervious to liquids, filter magnets are deployed singly or in grid arrangements depending on the cross-section of the supply line. Depending on their structure or function, they are also known as filter ...
Flow: 100 m³/h
Width: 1,200 mm
Weight: 9 t
The stone separator Stonefex removes stones and inert items reliably and very effectively from biomass fuels. A patented system of pressure and suction blowers generates exactly the right air flow in the expansion chamber ...
Width: 800 mm - 3,400 mm
Electromagnetic drum separators are available in both disc and transverse pole versions. In the STEINERT MTE Q transverse pole version there are several magnetic poles aligned parallel to the axis. The first pole generates ...
Length: 200 cm
Width: 60 cm - 130 cm
... distances are required. Our STEINERT UMP offering therefore extends from small, compact magnetic separators for semi-mobile use up to large magnetic separators, which can be equipped with permanent magnets ...
The cluster cutter is used to de-cluster mechanically harvested green beans. The cluster cutter consists of a large drum which consists of plastic segments mounted in rings, between which eccentric steel plates are mounted in such ...
Length: 400 mm - 4,500 mm
Weight: 0.4 t - 15 t
Wet drum magnetic separator aka low intensity magnetic separator(LIMS) is widely used in mines and coal separating factories to separate the wet fine magnetic substances or remove the magnetic substances ...
Slon Magnetic Separator Ltd.
Length: 1,800 mm
Width: 1,400 mm
Weight: 0.3 t
The oxidized iron ore mainly includes hematite, specularite, limonite, siderite and etc. in China. All of them are weakly magnetic ores, which are characterized by large reserves, low grade and fine disseminated particle size. Besides, ...
Slon Magnetic Separator Ltd.
Length: 2,100 mm
Width: 1,400 mm
Weight: 0.6 t
The oxidized iron ore mainly includes hematite, specularite, limonite, siderite and etc. in China. All of them are weakly magnetic ores, which are characterized by large reserves, low grade and fine disseminated particle size. Besides, ...
Slon Magnetic Separator Ltd.
Weight: 7, 8, 5.5 t
Ballistic separators are the systems which separates the 3 dimensional material such as P.E.T. bottle, HDPE, Cans, etc… and 2 dimensional material such as cardboard, paper, nylon, etc… and fine materials. Triple separation ...
When the load passes below the overband, the ferritic particles are attracted by their permanent magnets, thus producing a separation of said particles from the rest of the waste.
It receives the material from a conveyor belt and through its magnetic field separates the ferrous material from the rest of the materials.
The target of the countercurrent sifter is the reduction of the dust content in chemically bonded foundry sand. Sand attrition units remove the organic binder surface at means by friction from the sand grain. This organic „binder dust“ ...
JÖST
... the flow of air and are discharged at the base of the separator. The light material carried by the air flow exits out the top through the sifter channel and is conveyed via ducts to the cyclone where ...
JÖST
Flow: 25 m³/h - 100 m³/h
... material falls through the ascending air stream and is discharged at the separator base. Light material is discharged together with the exhaust air at the upper part of the separator and conveyed via ...
JÖST
Our Round Drawer-In-Housing magnetic separators are designed for ferrous metal separation in processing systems. The Round Drawer-In-Housing Series is an in-stream magnet for dry, free flowing powders and granular products. ...
... finishing. Removing the inner components of the rotary separator is extremely simple, for easier cleaning. The following are just a few of the products which are typically sieved using the rotary separator.
... drilled sheet allowing separation. Driven by the auger, the product comes into contact with the mesh, which lets through the solid fraction (e.g. pulverised shavings), which shall be discharged from the hopper. Impurities ...
... steel from the waste incineration slag that contains metal is performed using an iron magnetic separator, NE separator and allmetal sorter (V2A separator). The metals are then melted ...
Flow: 100 l/h - 400 l/h
The AUTOMATIC OIL SEPARATORS of the CLEAN OIL series are characterised by their versatility; in fact, for a diversified production facility, one centralised system can be used to serve several machine tools, thus ensuring ...
Flow: 300 l/h - 800 l/h
The AUTOMATIC OIL SEPARATORS of the CLEAN OIL series are characterised by their versatility; in fact, for a diversified production facility, one centralised system can be used to serve several machine tools, thus ensuring ...
Electromagnetic separator drums to separate ferromagnetic material from a conveying stream. These magnets are used in the areas of recycling of waste and recovery of metals. The drums can be used in many ways and are ...
Suspended belt separator for the separation of ferromagnetic material, without interruption of the conveying process. These magnets are used in the areas of recycling of waste and recovery of metals. A belt running ...
Washing and Fines Removal. 1/3 the water, 1/3 the power: The Ortner® is revolutionary in aggregate washing equipment for dewatering, removing fines, classifying and rinsing sand and other materials up to 3”. Material is fed into a ...
Width: 590 mm
... first selection according to materials specific weight. The biggest and heaviest particles fall down through the zig zag separator and sorted out from the main flow. The lightest material is conveyed to the decantation ...
Flow: 560 l/h - 1,500 l/h
... to be separated and of the diameter of the disc. In the case of oil we can reach a caudal of 1500 lts/h. per disc. The separator can be equipped with up to 10 discs in standard performance. Among the diverse applications ...
Counter current classifier The classifiers from B & D are based on gravitational force and counter current. The usage of these oppositional forces has been proven in many sand plants. The computer ...
To remove organics and other impurities from sand, B & D has designed the dense medium separator (D.M.S). It also works with the principles of gravity and counter current. A removal percentage of 99% is easily achieved. With ...
... due to gravity and flow toward the drain. Wide range of work conditions in separation of liquid contaminants (including solids and associated gases in the flow of gas being processed: very fine sand, hydrocarbons, ...
Fiber separator is pulp defibering equipment in stock preparation system for waste paper pulp. It is a new equipment which is developed for adapting to the needs that high quality of paper pulp is made from waste papers. ...
Flow: 5,000 l/h - 50,000 l/h
SPX FLOW Seital Separation Technology offers a wide range of self-cleaning separators for liquid/liquid/solid separation. This type of separator allows for the recovery of fine particles ...
Flow: 750 l/h - 7,500 l/h
SPX FLOW Seital Separation offers a wide range of solids-retaining separators for liquid/liquid/solid separation with very low solids content in the feed (less than 0.2% ...
Flow: 3,000 m³/h
... ACCESSORIES/COMPLEMENTARY ITEMS • supporting metal sections • hot galvanised extraction circuit • fan • dust decantation cyclone • jet bag filter • static bag filter
Please specify:
Help us improve:
remaining