Tele current monitoring relays
Tripping current: 4 mA - 2,000 mA
Trigger voltage: 24, 115, 230 V
... function. The relay can also be used for larger AC- currents with an external shunt or a current transformer. A relay for monitoring AC ...
Brodersen Controls
Tripping current: 10 mA - 5,000 mA
Trigger voltage: 24, 115, 230, 400 V
Single phase current relay for detecting a level of AC or DC current. When the monitored current rises and reaches the determined setpoint, ...
Brodersen Controls
Tripping current: 500 A
Trigger voltage: 24, 115, 230 V
A relay for monitoring high AC or DC current by connecting AC current transformator with secundary current ...
Brodersen Controls
Tripping current: 4 A
... Single-phase multifunction Power Transmitter suitable for the measuring of 12 different parameters of the singlephase power network: • The TRMS values of phase voltage and phase current • ...
Tripping current: 50 mA
Trigger voltage: 200 V
... following output options (2 limit-relays are standard, beyond that only one option at the same time): • +2 normally open relay contacts (SPST) for limit switching or for simple control tasks. (In this ...
*Delicate Design: - MCU control with SSR control contact * Optimum Flexibility - Wide Current Adjusting range (100%~1200%) - External CT available (100:5 ...
Power relay, single-phase network 2 Module Non-priority load tripping management Relay output for load tripping or external sound signaling (selectable) Inner alarm Buzzer Measuring ...
Tripping current: 0.02 A - 16 A
Trigger voltage: 24 V - 480 V
Current monitoring relay for single-phase system, AC/DC maximum current control, 5A or 16A • Type of product: Current monitoring ...
... applied to radioactive power supply and looped network power supply system, could help the system recognize and automatically eliminate instantaneous failures, isolate permanent failure section, avoid ...
SEL-321-5 Phase and Ground Distance Relay The SEL-321-5 Relay is designed especially for EHV and HV applications on 50 Hz systems. The relay provides enhanced single-pole tripping, ...
Schweitzer Engineering Laboratories
Tripping current: 30, 50 mA
Trigger voltage: 5, 24 V
... heating and cooling PID autotuning ... -Current monitoring and alarms up to 50A with current transformer (CT) -RS485 communication with MODBUS RTU (others on request) -Pluggable module ...
Trigger voltage: 24 V - 240 V
... adjust its delay with 0,5 to 10 s to remove short current peaks and good in changing its current through potentiometer. The choices of 5 ranges are AC 0.1-1 A, AC 0.2-2 ...
... multi-protection overcurrent relay equipped with the directional ground fault trip, the ratio differential trip and the reverse power trip function. It shows various information including the phase current, ...
Tripping current: 0.02 A - 2 A
... Over current: In normal operation, the relay is in the energised state (monitored current below the set trip level). When the current increases above the trip level, ...
Broyce Control
... includes relays suitable for installations with DIN rail, Panel or Base Mounting. All relays are suitable for use on a.c. systems and will be unaffected by d.c. components which may be present. A range ...
Tripping current: 0.15 A
Trigger voltage: 24 V
... substations. Current relay CR-100 is operated by 24 V operating DC power supply and it measures the magnetic field around the busbar which passes through it. Current ...
Tripping current: 20 A
Current monitoring relay PRI-32The current transformer relay, which senses the current through the passing wire, is used to monitor ...
ELKO
The Electrical Variable Analyzer Relay (EVAR) relay has been designed for the continuous monitoring of electrical parameters in medium or low-voltage 1-phase or 3-phase systems. It allows ...
Orion Italia
Tripping current: 0.1 A - 25 A
... of current monitoring relays are used for the control of AC and DC current signal in various industrial and domestic applications. ...
Trigger voltage: 24 V - 230 V
Insulation monitor for electrical installations Current measurement < 1 mA 3-digit screen for reading and configuration Double entry for PTC, PT100 and bimetallic contact probes Optional connection ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining