Process temperature: -30 °C - 105 °C
Process pressure: 0 bar - 20 bar
... combination with a comprehensive set of options make the DLF 8980 suitable for a wide range of industrial applications. The magnetic float which activates reed contacts inside the guiding rod provides ...
Process temperature: -30 °C - 180 °C
Process pressure: 0 bar - 50 bar
... Up to 6 switch points • Protection IP65 • Optional: Temperature sensor PT1000 or thermostat • Potted electrical contacts About The principle of operation of these instruments is based on the drive of ...
Process temperature: -40 °C - 85 °C
Process pressure: 0 bar - 260 bar
Main features • No moving parts • Hermetic construction, sealed electronics • Minimum degree of protection IP65 About The optical sensor is located in a metallic body which includes a polysulfone prism inside of which ...
Process temperature: -20 °C - 80 °C
Process pressure: 10 bar
Float switch for a secure, selective level measurement Through their design and the selection of materials, the float switches are specially developed for use in shipbuilding or in ...
Process temperature: -20 °C - 80 °C
Process pressure: 10 bar
... , no loose parts *in comparison to standard level switch 010-5003 Float switch for a secure, selective level measurement Through their design and the selection ...
Process temperature: -20 °C - 150 °C
Process pressure: 16, 10 bar
... chemicals, control of naval transport level, on / off pump by level, remote control level of raw materials reception and top-level alarm. Materials EN 1.4404 (AISI ...
Process temperature: -50 °C - 300 °C
Process pressure: 10 bar - 400 bar
Detection level of dosing tanks. steam condensate, hot water storage, on / off pump control, maximum-minimum level control. Materials EN 1.4404 (AISI 316L), PVC, PP, PTFE, PVDF Leven detection Micro-switch ...
Process temperature: -30 °C - 150 °C
Process pressure: 25 bar
Control applications in pumping circuits, level detection or presence of solids or liquids in open or closed tanks or pipes, tanks agitation, open channels, distillation columns, degassing, silos. Connections Thread ...
Process temperature: 0 °C - 100 °C
Process pressure: 0 bar - 10 bar
The LNM Series of Microwave Level Switch, manufactured by Kobold Instrumentation, is mainly used for detecting levels of fill. It features a microwave field which is penetrates various ...
KOBOLD INSTRUMENTATION
Process temperature: -20 °C - 70 °C
... design with integrated relay for conductive media 2 or 3 electrode rods made of 1.4571 stainless steel for 1 or 2 filling levels simple installation by G 1˝ housing thread or DN 25 tube clamp operation voltage 24 ...
Process temperature: -20 °C - 60 °C
Process pressure: 0.8 bar - 1.1 bar
Reliably prevents overfi lling of containers high operating reliability Easy installation and commisioning (plug and play) Compact device for stand-alone applications or process controlling Suitable for aggressive fluids Independent ...
Process temperature: -20 °C - 60 °C
... fiberglass tanks. Description Standard capacitive units with rod or rope extension, for general industrial applications. Suitable for ON-OFF level control of granules, powders and liquids, IP66 ÷ 67 protection.
SGM LEKTRA
Process temperature: -20 °C - 60 °C
On/Off Capacitive control is an established and extensively used level control technique. The instrument is composed of an electrode, suitable for the application, and of an electronic insert mounted inside a protective ...
SGM LEKTRA
Process temperature: -30 °C - 80 °C
Process pressure: -1 bar - 6 bar
... . Description CLS5 is a capacitive level control instrument that uses an advanced technology. CLS5 is equipped with a sensor in PP heatsealed. This allows its use in a wide applications range for the level ...
SGM LEKTRA
Process temperature: 0 °C - 60 °C
NP-04 is a level control during the process filling and emptying of tanks and containers. Maximum and minimum level control. Plastic float attached to a flexible cable with three conductors. Working ...
Sensotec Instruments
Process temperature: 60 °C
Process pressure: 4 bar
Float switch for level control during the filling and emptying processes of tanks and containers. Maximum and minimum level control. Plastic float attached to a flexible cable with three ...
Sensotec Instruments
Process temperature: -30 °C - 140 °C
SRF-381-01 vertical level switch. Protection (float + stem) IP 68. Minimum density (according the float) > 0.45 g / cm³. Reed contact, 10 A maximum power., Isolation 1012Ohm, Vibration ...
Sensotec Instruments
Process temperature: -70 °C - 454 °C
Process pressure: 0 bar - 207 bar
The InnovaSwitch insertion-type level switch is a high-performance, industrial-grade liquid level indicator for tanks and process vessels. This product switches on level ...
Level control for filling and emptying tanks or cisterns. Microswitch electrical contacts, changeover 10A (0,5 HP) and 20A (2 HP). The waterproof float switch BL is made up of: - Single outer casing ...
GAVE ELECTRO
SKF Series Level Control Float Switches › As electrical parts are not n the water, safe and reliable › Operation distance adjustable with gravity part › Simple assembly › Limit switch ...
EMAS
Process temperature: 0 °C - 80 °C
Process pressure: 0 bar - 10.34 bar
Electro-Optic Level Switches are low cost, compact, optical level sensors with built-in switching electronics. With no moving parts, these small units are ideal for a variety of point level ...
GEMS SENSORS & CONTROLS
Input Type Level Meter Category:Equipment Browse:237 Times Product Profile Specification: Data Contains modell: LXSC3051TR22M4 Measuring Range(m): 0-1/15 Material: Sealing film 316L Accuracy: 0.5% Output Signal: 4-20mA
Luxi Chemical Group Co.,Ltd.
Process temperature: -40 °C - 230 °C
Process pressure: -1 bar - 64 bar
... is used to drive and feed back the tuning fork rod, so that the tuning fork rod can produce resonance. When the material level contacts the tunng fork rod, the frequency signal feed back by the turning fork rod will ...
Process pressure: 10 psi
... Check Lube Level Without Shutting Down Use on Engines, Pumps and Compressors Combination Indicating Gage with Low and High Limit Switch Float Operated The L129 Series Lube Level ...
Frank W Murphy Ltd.
Process temperature: -30 °C - 60 °C
Level switch measurement for min./max. alarm The level switch measuring system LB 471 is used for point level measurements, providing either high ...
Process temperature: -10 °C - 80 °C
Process pressure: 0 bar - 20 bar
... Connection: 1/2” to 1 ½” BSP or NPT, Flange and Sanitary Wetted Parts: 316 SS High level alarm Low level alarm Pump protection Leak detection Overflow alarm ...
Sitron
Process temperature: -20 °C - 65 °C
... Oil tanks Sumps Reservoirs Sludge, slurry or turbulence Chemical storage tanks Lift station monitoring Liquid level in vented tank Landfill leachate monitoring Dewatering Pump control Features Non-clogging ...
Process temperature: -10 °C - 80 °C
Process pressure: 0 bar - 10 bar
Level Switches with Stop Ring Materials of constructionGSA – brass stem, NBR float GSIA – all 316 stainless steel Actuation points LM1 – 1 actuation point N.C./N.O. contact LM2 – 1 actuation point SPDT contact LMM1 ...
ELETTROTEC s.r.l.
... system, excessively high liquid levels, oil layer thickness or sludge layer thickness can be monitored. idOil alarm systems are available in complete packages. idOil-20 LIQ system package for detecting high liquid level ...
Labkotec Oy
Process temperature: -25 °C - 55 °C
Process pressure: -0.5 bar - 16 bar
Light source: LED (red light) Measurement: Switch Response time: <10 ms Process connection: 1/2" BSP male Supply voltage: 10...30 VDC Electrical connection: M12x1, 4-pin Signal output: PNP or NPN MEDIA: Fluids ...
Process temperature: -20 °C - 60 °C
Process pressure: 2 bar
The general purpose ultrasonic level sensor provides continuous level detection up to 26.2’ (8m) with 3 programmable relays for level switch or level ...
Flowline
Process temperature: -10 °C - 65 °C
... float switch 2000.0 with PG 7 thread is frequently used for level detection in medical applications. The compact design and reliable measurement also make this float switch ideal for ...
ELOBAU
Process temperature: -40 °F - 302 °F
Process pressure: 0 bar - 102.04 bar
... Capacitance level switches are designed for point level alarm or control of conductive and non-conductive liquids, granular materials, foams, pastes, slurries and interface applications. They may be used ...
Process temperature: -40 °C - 125 °C
Process pressure: 100 psi
The OS3 industrial optical level switch is a point level sensor with built-in electronics and works with no moving parts. This level switch ...
Strain Measurement Devices
Float type level switch FB-5000 is a highly compact and durable float switch which is installed at a tank side through a nozzle. Made out of 316 SS, it has high corrosion resistance ...
Please specify:
Help us improve:
remaining