- Power Transmission - Mechanical components >
- Mechanical Transmission >
- Flexible coupling >
- Voith Turbo
Voith Turbo flexible couplings
Torque: 0.18 Nm - 50.7 Nm
Rotational speed: 30,000, 45,000, 35,000 rpm
... Dynamometer and Hysteresis Brake (HB). The couplings consist of one (MIC-6) or two (MIC-5) disc packs, two clamping hubs and a spacer. They are both torsionally stiff and flexible in order to compensate ...
Torque: 15 Nm - 450 Nm
Rotational speed: 0 rpm - 10,000 rpm
... hubs. The couplings are both torsionally stiff and flexible in order to compensate for axial, angular and radial misalignment when connecting two shaft ends. The high torsional spring ...
Torque: 30 Nm - 6,000 Nm
Rotational speed: 0 rpm - 10,000 rpm
... bellows and 2 clamping hubs. The couplings are both torsionally stiff and flexible in order to compensate for axial, angular and radial misalignment when connecting two shaft ends. The high torsional ...
Torque: 40.67 Nm - 564.92 Nm
Rotational speed: 6,700 rpm - 15,000 rpm
... Compact Design A1C Aluminum Flexible Shaft Coupling Applications Our next-generation Single Flex Composite Disc Couplings allow users to transmit high torque in a small envelope. ...
ZERO-MAX
Torque: 15.817 Nm - 51,860.03 Nm
Rotational speed: 1,000 rpm - 3,000 rpm
... Schmidt coupling’s compact design eliminates radial vibration and creates no side loads, while allowing for dynamic misalignment changes without a loss in performance. Schmidt Offset Shaft Coupling ...
ZERO-MAX
Torque: 20.33 Nm - 232.48 Nm
Rotational speed: 4,100 rpm - 12,000 rpm
... Flex CD® Flexible Shaft Couplings provide a tough, robust, and durable design that is ideal for motion control applications requiring increased misalignment capacity compared to Zero Max’s Single Flex ...
ZERO-MAX
Torque: 78 Nm - 23,780 Nm
Rotational speed: 1,060 rpm - 6,000 rpm
Features - Simple in construction - Power transmission through high tensile bolts - Highly stiff rubber Bushes are capable to bear the shock load - Rubber bushes remain unaffected from water, oil or dust & suit to temperature up to 80ºC - ...
PIX Transmissions Limited
Features - Ease of installation due to simple construction - Low operational cost - Star rubber element is only spare to be replaced in maintenance - Available with spacer arrangement for distant shaft connection - Quick snap-wrap element ...
PIX Transmissions Limited
... incidental misalignment Exceptional performance at lower costs Suitable for flywheel applications Peak loads are reduced by a flexible component, as a prime design consideration Available in both Pilot Bore & Taper Lock design
PIX Transmissions Limited
The GS series is a line of couplings manufactured by Neff. This tool is a special anti-backlash shaft coupling with a toothed ring. This results in low surface pressure, and increased rigidity of the ...
Torque: 7.5 Nm - 2,400 Nm
Rotational speed: 1,500 rpm
NEFF's RA/RG Series of couplings are part of the company's line of NEFF Coupling accessories. Models of both series are designed to be torsionally flexible. They are generally utilized ...
Torque: 64,000 Nm
... torsional vibration. Flexible shafts, consisting of couplings, connected by fixed-length or telescopic centre shafts, will tolerate very large movements with minimal shaft reaction forces. Applications ...
TWIFLEX
Torque: 38,442, 96,093 Nm
Rexnord Omega Close-Coupled Orange Couplings Omega close-coupled elastomeric coupling consists of the unique split-in-half flex element and reversible hubs. Available in Inch (Imperial) or Metric Hubs ...
Rexnord Industries, LLC
Torque: 2.6 Nm - 6,600 Nm
Rotational speed: 2,500 rpm - 14,000 rpm
• Curved jaw design • Torque ratings from 10Nm to 3300Nm • No need for lubrication • Quick and simple to install • Reliable, rugged and compact • 4 Standard spider types available • Elastomeric element resistant to heat (-40°C+90°C), ...
Power Jacks
Torque: 1.8 Nm - 5.6 Nm
Rotational speed: 3,000 rpm - 5,000 rpm
Encoder accessories, couplings, converters, and gateways The right accessories for installation and extended functionality Leine Linde offers a wide range of accessories for its encoders. Shaft couplings, ...
Torque: 12.5, 17, 60, 160 Nm
Torsionally flexible claw couplings are suitable for compensating axial, radial and angular misalignments and for damping vibrations and torque shocks. The shock-absorbing properties are due to the ...
Torque: 1.1 Nm - 65 Nm
Rotational speed: 9,000 rad.min-1 - 42,000 rad.min-1
... equipment / Mount machines / Medical / Machine tools / Packaging machines ● Optional Services -Couplings Bore and Keyway Additional Modification Service -Coupling Stainless Steel Screw Alteration Service -Cleanroom ...
NBK (Nabeya Bi-tech Kaisha)
Torque: 4.9 Nm - 560 Nm
Rotational speed: 10,000 rpm - 23,000 rpm
MJB is a jaw type flexible coupling. With the superior high torque transmission, it is ideal for machine tool spindles. Excellent flexibility allows eccentricity, and angular misalignment and vibration ...
NBK (Nabeya Bi-tech Kaisha)
Torque: 1.1 Nm - 35 Nm
... Actuator / Surface-mount machine / High precision XY stage / Index table Optional Services -Couplings Bore and Keyway Additional Modification Service -Coupling Stainless Steel Screw Alteration Service Please ...
NBK (Nabeya Bi-tech Kaisha)
SOFTEX® FA COUPLINGS The torsionally flexible Softex® couplings are maintenance-free and have good dynamic properties. The drive couplings are also available as Softex® ...
HBE GmbH
• Under initial tension no backlash shaft connection • Triple axially pluggable version • Simple blind mounting, no time-consuming screwings • Small structural dimensions – low flywheel effects • Maintenance free, simple optical ...
HBE GmbH
... applications in the mechanical engineering • Friction-locked, detachable shafts / hub connections • Coupling combination TL 1/1; TL 2/2 and TL 1/2 possible • Coupling hubs TL 2 axially separable • ...
HBE GmbH
Torque: 31 Nm - 7,200 Nm
Couplings TORSIONAL FLEXIBLE COUPLINGS - “GEB HRC”
Type HRC flexible couplings are among the most robust available. They are chosen for the most common applications. Their machined diameter makes alignment quick and easy: just use a ruler to install them. ...
Torque: 10 Nm - 975 Nm
These elastomer star couplings are used on servo shafts to overcome critical vibrations and when all-steel couplings reach their limits. They transmit torque without backlash and compensate for misalignment. ACPG ...
Torque: 11.5 Nm - 420 Nm
Curved-tooth couplings function as flexible connections. They are particularly suitable for transmitting high torques. They compensate for axial, radial and angular misalignments of the shafts to be connected. ...
Torque: 3.6 Nm - 2,380 Nm
Rotational speed: 2,100 rpm - 10,000 rpm
The Nil-Union elastic coupling model 1 is very suitable at the entrance and exit of gearboxes, for machines or heavy-duty devices and also for machines with frequent stops and starts under full load or ...
Torque: 1.5 Nm - 237 Nm
Rotational speed: 3,500 rpm - 12,000 rpm
The Nil-Union elastic coupling models O and L differ in the length of the crown. The L model has the longest crown, and is especially suitable for use between any receiving machine and an electric motor ...
Torque: 3.6 Nm - 100 Nm
Rotational speed: 6,600 rpm - 10,000 rpm
The Nil-Union elastic couplings Models S and LS differ in the length of the crown. They are especially suitable for use between any receiving machine and an electric motor with alignment problems. Shaft ...
Torque: 380 Nm
Couplings G-GM Series: G series: max 1250 Nm GM series: max 380 Nm
Torque: 20 Nm - 1,600 Nm
Rotational speed: 300 rpm - 3,500 rpm
• customized length up to 3 m • plug in, backlash free, oszillation dampening • split- hub on both sides • stainless design (aluminum) • Torque range: 20 - 1600 Nm • Shaft diameter: 10 - 100 mm • temperature range: -30°C up to +90°C
JAKOB Antriebstechnik GmbH
Torque: 4 Nm - 1,000 Nm
Rotational speed: 8,000 rpm - 20,000 rpm
• variable lengths from 55 to 260 mm • without additional intermediate storage • backlash-free, precise torque transmission • special symmetrical clamping hub with high balancing quality and for high operating speeds
JAKOB Antriebstechnik GmbH
Torque: 8 Nm - 2,000 Nm
Rotational speed: 6,000 rpm - 29,000 rpm
• radial clamping hub on both sides • cost-effective, very short design, standard series • plug in, backlash free, oscillation dampening • Torque range: 8 - 2.000 Nm • Shaft diameter: 8 - 90 mm
JAKOB Antriebstechnik GmbH
Torque: 0 Nm - 7,200 Nm
... compounds have been studied to cope with any type of practical application. The great advantage of flexible couplings lies in their “failsafe” design, as the coupling is not necessarily ...
SATI
Torque: 0 Nm - 10,000 Nm
Rotational speed: 1,000 rpm - 3,600 rpm
... pulley, flexible and elastic couplings, cardan shafts and electric control board. Special versions for low-temperature operation and Eex design are available. KTP VARIABLE FILL HYDRAULIC ...
Transfluid
Torque: 20 Nm - 33,100 Nm
Rotational speed: 1,500 rpm - 5,000 rpm
The BM flexible couplings are born from the historical BT couplings mounted for decades on Transfluid fluid couplings in thousands of applications. It is basically the ...
Transfluid
Torque: 310,000 Nm - 16,720,000 Nm
Rotational speed: 2,400 rpm - 4,500 rpm
... Atex certification is available too. CONFIGURATION OF RBD ELASTIC COUPLINGS Couplings can be provided: with or without hub with spline or keyway with conical locking ...
Transfluid
Torque: 9 Nm - 2,450 Nm
Elastomer/Safety coupling ES2 Two coupling hubs are concentrically machined with curved jaws • one side with an integral torque limiter • Elastomer rim optional • Reliable torque overload ...
ETH-messtechnik gmbh
Torque: 0.5 Nm - 12,500 Nm
Rotational speed: 0 rpm - 15,000 rpm
Elastomer Coupling EK1 Two coupling hubs are concentrically machined with curved jaws • Bore tolerance • keyway • set screw or optional pilot bore • Economical design • concentrically ...
ETH-messtechnik gmbh
Torque: 0.13 Nm - 3.28 Nm
Rotational speed: 0 rpm - 10,000 rpm
BKNS • Backlash-free angularly aligned transmission • optimum compensation of misalignment • very high torsion spring stiffness • minimum restoring forces • vibration damping • ideal for ...
ETH-messtechnik gmbh
Torque: 0.3 Nm - 40 Nm
Rotational speed: 7,500 rpm - 25,000 rpm
... element - a flat parallel link system with flexure joints - combined with this technical plastic material gives the encoder coupling special properties. It enables displacement compensation on one level with the resulting ...
SCHMIDT-KUPPLUNG
Torque: 3 Nm
Rotational speed: 6,000 rpm
... consequence, they are ideal for extreme operating conditions. Single joint couplings are available with different hub lengths and bore diameters in addition to insulated coupling versions for attachments ...
Torque: 3 Nm
Rotational speed: 6,000 rpm
... consequence, they are ideal for extreme operating conditions. The double joint couplings are available with different hub lengths and bore diameters in addition to insulated coupling versions for attachments, ...
Torque: 0 Nm - 9,600 Nm
Rotational speed: 0 rpm - 34,000 rpm
Backlash free jaw coupling «in steel» 'GAS/SG-ST' Made in steel fully turned with standard phosphating treatment. Several elastomer hardnesses available (page 27). High torsional ridigity. Electric ...
ComInTec
Torque: 10 Nm - 56,000 Nm
Rotational speed: 1,400 rpm - 19,000 rpm
Metal hubs (cast iron, steel, aluminium alloy) Polyurethane spider In “flexible couplings” range it has got best "transmissible power/dimension" ratio Couplings can be supplied according ...
SIT S.p.A.
Serie GB Self-aligning joints Manufacturer - Chiavette Unificate S.p.A. Part Number - GB 6
Torque: 112,984 Nm
the first, the finest... flexible coupling with Fully-Crowned Gear Teeth. In contrast with ordinary gear tooth forms, the Amerigear Fully-Crowned Tooth represents the ultimate achievement in the art of ...
Ameridrives Couplings
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining