- Power Transmission - Mechanical components >
- Mechanical Transmission >
- Torque coupling >
- Voith Turbo
Voith Turbo torque couplings
Rotational speed: 500 rpm - 1,800 rpm
... Controlled - Variable Speed Fluid Coupling In industries the deciding factor for choosing the prime mover (motor) for a machine is the power required to start the machine from standstill condition, called the starting ...
BENZLERS
Torque: 476,000, 238,000 Nm
Rotational speed: 0 rpm - 22,000 rpm
... -metal Membrane Coupling John Crane’s Metastream® L Series range of membrane (disc) couplings are specifically designed to provide a cost-effective solution for demanding industrial applications. They ...
John Crane
Torque: 2,000 Nm
... had been heated and shrunk on. But no heat is required, and the coupling can be removed as easily as it was mounted. This powerful use of friction enables the OK coupling to transmit torque ...
Torque: 160 Nm - 10,300 Nm
Rotational speed: 1,700 rpm - 5,000 rpm
... :from -30 to +80 °C Product description:Torque is transmitted via elastic coupling sets, that are in evenly placed pockets around the periphery of coupling part 1 type A The corresponding ...
APSOparts®
Torque: 1 Nm - 400 Nm
Coupling with adjustable residual torque (holding brake). It is used when, in the event of a collision, the torque must only be reduced and not completely interrupted. This is often the ...
HA-CO GmbH
Torque: 15 Nm - 10,000 Nm
Rotational speed: 0 rpm - 10,000 rpm
... bellows Brief overloads of up to 1.5x the rated torque are acceptable. Material Bellows: high grade stainless steel Hubs: steel Properties General information Service life R+W bellows couplings ...
R + W Coupling Technology
Torque: 15,000 Nm
Rotational speed: 19,000 rpm
Spider couplings, also known as jaw couplings, are torsionally flexible shaft couplings which enable the connection of shafts or flanges via a polyurethane drive ring. Parallel, angular ...
jbj Techniques Limited
Torque: 36,400 Nm
... torsionally rigid coupling High degree of economy Maintenance-free Our all-steel coupling was specially developed for drive concepts where reliable, maintenance-free torque transfer ...
Walther Flender
Torque: 34 Nm - 73,000 Nm
Rotational speed: 50 rpm - 1,500 rpm
... to the output. The INKOMA – PK-coupling transmits torque without any radial loads on related bearings. The INKOMA – PK-coupling is dynamically balanced and absorbs radial vibrations. The ...
INKOMA, ALBERT
Torque: 2.5 Nm - 120 Nm
Rotational speed: 7,000, 4,000, 10,000, 9,000 rpm
... peaks in the torque. ► Exceptionally long-life ensured by precompressing the flexible element. ► Tolerance to large misalignment: avoids the need for precise alignment of the machines to be coupled. Specifications The ...
PAULSTRA
Torque: 15 Nm - 37,500 Nm
Rotational speed: 2,500 rpm - 9,900 rpm
Fail-safe plug-in/jaw coupling with flexible element (spider) Standard applications with normal requirements regarding torque and damping capabilities. Product features Plug-in coupling, ...
Optibelt
Torque: 0 Nm - 48,110 Nm
... shafts measuring 190mm in diameter by means of a mechanical interference fit and transmits up to a maximum of 48110 Nm of torque. Best Suited For: Applications where having no axial movement of the mounted component ...
Fenner Drives
Torque: 0 Nm - 64,000 Nm
... to medium power ranges up to torque ratings of 64 kNm. The blocks can be used in parallel leading to compactness and making the coupling suitable for high speed operation or in series to provide a torsionally ...
Torque: 210 Nm - 6,480 Nm
Rotational speed: 0 rpm - 12,000 rpm
... FLEXIBLE COUPLING ASSEMBLY The new SGFlex-3F Series coupling system incorporates industry proven SGFlex couplings with solid steel flanges or flywheel combinations to provide an integrated ...
SGF GmbH & Co. KG
Torque: 1,920 Nm - 8,000,000 Nm
Rotational speed: 1,730 rpm - 6,000 rpm
Nidec DESCH gear couplings GC are flexible shaft connections suitable for a positive torque transmission. They ensure to compensate radial, axial and angular shaft misalignments. The gear coupling ...
DESCH
Torque: 0.68 Nm - 45.3 Nm
Rotational speed: 4,500 rpm
... assembly where shaft movement is restricted. In addition, the construction of the centre disc allows the oldham coupling to act as a torque limiter or overload device. Technical features include: Zero ...
Reliance Precision Limited
Torque: 0.06 Nm - 220 Nm
Rotational speed: 44,000, 26,000, 22,000, 18,000, 13,000 rpm
Transmitting Torque Through Air Magnetic couplings offer a non-contact transfer of torque. They are typically used in magnetic drive pumps and magnetic mixers for seal-less applications; ...
Torque: 1.47 Nm
Rotational speed: 6,000 rpm
... FCMR16-6-5-A is a clamp style six beam coupling with 6mm x 5mm bores, 15.9mm OD, and 25.4mm length. It is machined from a single piece of material and features two sets of three spiral cuts. This gives it higher torque ...
Ruland Manufacturing Co., Inc.
Torque: 32 Nm - 3,150 Nm
Rotational speed: 100 rpm
A medium power torsionally flexible coupling combining shock absorbing and misalignment capacity, used in the widest range of industries and applications. Features & Benefits Torsionally flexible - shock absorbing, ...
RENOLD
Torque: 2.1 Nm - 17 Nm
... ability of the collar, it efficiently reduces slipping on the shaft, has anti-stick-slip characteristics and helps to keep the torque rating of the screw within its designed parameters. The oxide layer also provides corrosion ...
Torque: 0 ft.lb - 6,040 ft.lb
Rotational speed: 2,200 rpm - 9,200 rpm
... Sure-Flex couplings, the need for lubrication and maintenance is eliminated. As a result, these couplings provide clean, dependable, and quiet performance for a variety of applications. Product Features High ...
TB Wood s Electronic - Woodsdrives.com
Torque: 5.6 Nm - 100 Nm
Rotational speed: 5,000 rpm
Thin pressed steel membranes act as the pivotal members in these couplings. Torque is resolved to simple tensile stresses in opposing segments of the membranes. These couplings have near-infinite ...
Huco Engineering Industries
Torque: 1.28 Nm - 33.5 Nm
Rotational speed: 4,000 rpm - 14,000 rpm
... displacement values are dependent on the RPM and power output. Careful alignment of the shafts increases the service life of the coupling. max. misalignment axial: ± 3,4 mm max. misalignment radial: ± 0,5 mm max. misalignment ...
Technische Antriebselemente GmbH
Torque: 15 Nm - 10,000 Nm
Metal bellows coupling with simple flange mounting Features For simple flange mounting to special drive components Custom flange patterns available Temperature range -30 °C to +100 °C (-22 °F to +212 °F) Design Two ...
R+W Italia S.r.l
Torque: 70 Nm - 515 Nm
... main function of a rigid shaft coupling is the safe and backlash-free connection of two shaft ends by means of frictional engagement. For example, between an input and output shaft and mainly for transmitting torque. ...
TAS-Schäfer GmbH
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining