- Hydraulics - Pneumatics >
- Pump >
- Water pump >
- Watson
Watson water pumps
Pressure: 250, 500, 350 bar
Constant displacement pump with positive locking piston control Low noise level 600 - 1800 rpm speed range Incl. connection flange and screws
Flow: 1,600, 1,200 l/min
Pressure: 1.6 MPa
Head: 80, 85 m
The MTFO series is characterized by its wide power range of up to 22kW. The open impeller enables also applications with a solids content of up to 30%.
IWAKI Europe GmbH
Flow: 1 l/min - 80 l/min
Head: 28, 20 m
Power: 0.37 kW - 0.55 kW
The MMP series is characterized by the heat and pressure resistance. The bearing made of SIC-D supports the reliability and the freedom from maintenance. High and low temperature media can be transfered without any problems.
IWAKI Europe GmbH
Flow: 4 l/min - 79 l/min
Pressure: 1 MPa
Head: 50 m
... characteristics of the MEK series. The pumps are appliable in diverse applications with a variety of chemicals. The sealless, corrosion-resistant and leakage-free construction are special features of these pumps. ...
IWAKI Europe GmbH
Flow: 26 l/min - 34 l/min
Pressure: 140 bar
Length: 36 cm
The TP03 and TP08 lines of trash pumps are a great example of the power of hydraulics when it comes to pumping liquids with solids. The TP03 pump provides 450 gallons per minute (1688 ...
Stanley Infrastructure
Flow: 42 m³/h
Power: 2.9 kW
Subaru OHC engine, Automatic low oil shut-off, 3 x hose clips, 2 x hose coupling, 1 x strainer, 1 x spark plug key
Flow: 0.9 m³/h - 36 m³/h
Pressure: 7 bar
Almatec E-Series State-Of-The-Art Plastic AODD Pumps The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, ...
ALMATEC Maschinenbau GmbH
Flow: 0.7 m³/h - 7.8 m³/h
Pressure: 7 bar
Head: 26'03" ft - 29'06"
... Series AODD Pumps for Low- to Middle-Duty Applications Almatec® CXM Series Air-Operated Double-Diaphragm (AODD) Pumps are general-purpose pumps designed for low- to medium-duty applications ...
ALMATEC Maschinenbau GmbH
Flow: 4.5 m³/h - 24 m³/h
... Air-Operated Double-Diaphragm (AODD) Pumps, special attention was paid to the shape of the product chambers. The result is a pump design that offers soft changes in direction, smooth flows and no dead ...
ALMATEC Maschinenbau GmbH
Flow: 5,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 0.7 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 25,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 4 kW
... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components. • Polypropylene (Moplen) pump ...
OMG sas di Gibogini Stefano e C
Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW
... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...
OMG sas di Gibogini Stefano e C
Flow: 30 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m
... driven engine fire-fighting water pump group series with high pressure are developed successfully, strictly complying with national standard-GB6245 2006 “Performance requirement and testing method ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 18 m³/h - 2,000 m³/h
Pressure: 0.3 MPa - 2 MPa
Head: 20 m - 500 m
Diesel engine centrifugal pumps are commonly used in various applications where large volumes of liquids need to be moved or pressurized. They are commonly used in water supply systems, ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
... benefits: Water supply systems: Centrifugal pumps are commonly used in water supply systems to increase the water pressure in buildings. They help move water ...
Shanghai Kaiyuan Pump Industrial Co., Ltd.
Flow: 10 m³/h - 30 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW
The “Dragon ME” series represents the evolution of the Dragon piston pumps series with the addition of the membrane unit in case of pumping highly abrasive liquids. Flow ranges: from 20 to 30 mc / h - in single mode ...
Flow: 10 m³/h - 60 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW
... under control. Flexibility of use and structural strength. In order to achieve these results the pumps had to be equipped with a proportional hydraulic pump, capable of constant power adjustment and ...
Flow: 1 m³/h - 10 m³/h
Pressure: 12 bar
Power: 1.5 kW - 5.5 kW
Piston Pump - "Libra" Series from 1 to 10 mc/h Pressure up to 15 bar Many materials configuration For pressure transfer of viscous liquid For sludge feeding of Filterpress For chemical Industry, ...
Flow: 11 l/min
Pressure: 15 bar
Power: 0.55 kW
Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C
... proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 1,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
... proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 10 l/h - 2,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C
... proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...
MIXTRON S.R.L.
Flow: 34 l/min
Macnaught 240V Electric AdBlue pump. 1"BSP inlet and outlet. 34l/min free flow Technical Specifications Voltage - 240V Current - 2A Power - 345W Duty Cycle - 20min Inlet - 1" BSPM Outlet - 1"BSPM
Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg
The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...
... components consisting of Water Pumps, Thermostats, Thermostat Kits, Switches & Sensors, Coolant Flanges and Radiator Caps. In the quest to reduce engine emissions, there is a growing trend among vehicle ...
Flow: 0 m³/s - 40 m³/s
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C
Vertical immersion pumps are multistage centrifugal pumps for installation on the mounting flange of tanks. PUMPED LIQUIDS Light, non-explosive, clean or contaminated liquids. Water Cutting ...
Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C
... in-line pumps Vertical and multistage centrifugal pumps. The in-line design enables the pump to be installed on pipes where the suction and discharge ports are on the same horizontal ...
Flow: 0.5 m³/h - 3.5 m³/h
Pressure: 0 bar - 10 bar
Head: 9 m - 54 m
... pressure multistage pumps can be used in numerous installations where the pump features and materials require specific conditions, such as: Air-conditioning Cooling Water treatment Fertilisation Environment ...
Flow: 110, 140, 70, 90 us gal/min
Head: 19.8, 18, 21.3, 12 m
Power: 0.75, 1.5, 0.4 kW
... electric submersible pump The GSP05 model is available in 0.5 hp (0.4 kW) and offers a flow rate of 70 US GPM (4.4 l/sec) and maximum heads to 39 ft (12 m). With a slimline top discharge design only 7.2 in (183 ...
Alcon
Flow: 100, 120 l/min
Pressure: 8 bar
Power: 0.35 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
NARDI COMPRESSORI
Flow: 115, 145 l/min
Pressure: 15 bar
Power: 1.1 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
NARDI COMPRESSORI
Flow: 36, 43, 29, 35 m³/h
Pressure: 10 bar
Power: 1.9, 2.2 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...
NARDI COMPRESSORI
Flow: 0 m³/h - 1,000 m³/h
Power: 1.3 kW - 310 kW
... properties Motors with high power density Robust and reliable COMPACT CHOPPER PUMPS CUT SUMP PROBLEMS DOWN TO SIZE The Flygt F 3069 chopper pump is specifically designed for pumping ...
FLYGT
Flow: 0 us gal/min - 12 us gal/min
Weight: 3.9 kg
... double-diaphragm (AODD) pump for reliable use in lubrication, tire filling, adhesive dispensing, OEM systems and many more industrial applications. Featuring a patented non-stalling, lubrication-free air valve design, ...
Flow: 0 m³/h - 71 m³/h
Length: 360 mm
Width: 280.34 mm
... double-diaphragm (AODD) pump features a classic clamped design that delivers reliability and portability. This pump is dimensionally interchangeable with Wilden 4 Clamped Series. Self-priming and available ...
Pressure: 16 bar
Fluid temperature: -10 °C - 60 °C
Length: 560 mm
The pump is designed to fill tanks of PR 14 type central lubrication pumps and other pumps with plastic grease. It may be used to fill other containers with plastic grease as well. Capacity ...
Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg
The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex ...
Flow: 0.4 m³/h - 12 m³/h
Pressure: 2.5 MPa
Head: 15 m - 130 m
... adopts API682 standard mechanical seal and flushing scheme. Various cooling methods such as natural cooling, air cooling and water cooling can be configured according to working conditions. ◉ Application: Clean or ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 2,600 m³/h
Pressure: 2.5 MPa
Head: 300 m
... design makes the pump have the characteristics of high efficiency, wide working range, stable performance, compact structure and stable operation. The series of block design, high degree of standardization, ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 10,000 m³/h
Pressure: 2.5 MPa
Head: 240 m
... horizontal, and foot-mounted; double-suction impeller makes the pump self-balance axial force, and the split structure makes it unnecessary to dismantle the pipeline and driver during pump maintenance. ...
SOURCE Pumps & SYSTEMS Co., Ltd.
Flow: 1.45 m³/h - 163 m³/h
Pressure: 9 bar - 80 bar
Fluid temperature: 85 °C - 130 °C
... contactless running of the pump elements in rotary lobe pumps opens up important perspectives: On one hand it is perfect for hygienic applications due to the complete elimination of abrasion ...
Flow: 1.4 m³/h - 60 m³/h
Pressure: 8 bar - 15 bar
Fluid temperature: 85 °C - 130 °C
... sweets iLOBE with integrated heat exchanger Small Premium Edition As an evolution of the conventional rotary lobe pump LC the iLOBE is equipped with an integrated heat exchanger ...
Flow: 72 l/h - 2,200 l/h
Pressure: 0 bar - 8 bar
Fluid temperature: 85 °C - 130 °C
... flexible handling by means of lifting bows. Discharge pumps for Fluidbag and barrels A specialty of ipp Pump Products GmbH is the progressive cavity pump FLB, which as a horizontal ...
Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m
... operating in optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump or the pump ...
Flow: 50 l/min
Pressure: 360 mbar
• Extreme compactness and solidity • High efficiency (up to class A ++) • Integrated heating element • Pressure: 360 mBar – Flow rate: 50 L / min Applications • Domestic and professional dishwashers
Flow: 36.2 l/min
Pressure: 35 bar
Fluid temperature: 60 °C
Electric motor pump assembly. AR 30 BlueFlex™ EM . Integrated control unit (GI 40).
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining