Water pumps

Flow: 0 m³/h - 3,600 m³/h
Head: 100 m
Power: 1.3 kW - 310 kW

... 100 m

• Sewage
• Raw water
• Cooling

Flow: 4.9 m³/h - 235.7 m³/h
Pressure: 4 bar - 24 bar
Power: 2.2 kW - 45 kW

... carried out on-site without the need to remove the pump from its installation. This significantly reduces downtime and optimizes the productivity of industrial operations. The PCM EcoMoineau™ MX pump is the ideal choice ...

Flow: 250 m³/h
Pressure: 2.8 bar - 3.3 bar
Head: 30.5 m

... SM series mud centrifugal pumps are mainly design for solids control circulating system of oilfield drill rig. It can be used to provide drilling liquid with a certain discharge capacity and pressure to sand, desilter ...

Flow: 10 m³/h - 50 m³/h
Pressure: 950 bar

... How it works - Inside the pump body is a rubber diaphragm, immersed in a service liquid ( water). - The compression of the diaphragm, obtained by injecting or removing water from the ...

Flow: 7 m³/h - 120 m³/h
Head: 9 m - 40 m
Power: 0.75 kW - 7.5 kW

... -phase submersible sewage pump is 220V, which is suitable for home use. WQD single-phase submersible sewage pump consists of three parts: water pump, seal and motor. The motor is located ...

Flow: 3 m³/h - 50 m³/h
Pressure: 1 bar - 5 bar
Fluid temperature: -10 °C - 10 °C

... transfer of sterile liquids and active ingredients. Water and Wastewater Management: In water treatment plants and wastewater systems. Energy Sector: In cooling and ...

Flow: 16 m³/h - 30 m³/h
Pressure: 100 bar
Power: 5.5, 3, 4 kW

... triplex plunger pump, also called submersible pump, submersible sewage pump, 5hp water pump, electrical submersible pump, stainless steel pump, ...

... leader in the pump industry pumps, vertical and horizontal shaft multistage pumps, heating, hot water and cooling water circulation pumps, industrial ...

Flow: 0 m³/h - 20 m³/h
Head: max 15.0 m
Input diameter: max 80.0 mm

... Dry-running capability. Rapid dry self-priming up to a depth of 7 meters in a matter of seconds. No seal or rotating part in contact with the pumped liquid. Can be used where there are abrasive or acid fluids. Wide passage for solid bodies (50 ...

Flow: 0 m³/h - 4,000 m³/h
Fluid temperature: 160, 110 °C

... Irrigation in general Drinking water supplies Wastewater treatment plants Heating and air-conditioning installations Fire fighting equipment Refineries, pipelines Conventional thermal plants Cooling ...

Flow: 43 m³/h
Input diameter: 65 mm
Output diameter: 65 mm

... industrial pump (⌀ 65mm). Made in 316L Stainless Steel and ABS plastic, it is for example perfectly adapted for a use in wineries. Lowmotion 2.5 is washable and it is possible to disinfect it. Light and easy handling With only 90kg, ...

Flow: 0 l/min - 40 l/min
Pressure: 8 bar
Head: 0 m - 25 m

... cleaning solutions, inks...) Agriculture industry (hazardous liquids, fertilizers) Seawater applications Water and wastewater treatments ( water charged with residues) ...

Flow: 400 m³/h
Pressure: 48 bar

... Nova Rotors, is a range of progressing cavity pumps. This pump is completely reversible and has a wide pumps range. It features a one stage stator with long pitch geometry to improve the performance and ...

Flow: 0 m³/h - 4,000 m³/h
Pressure: 0 bar - 20 bar
Head: 0 m - 200 m

... The North Ridge Pump as Turbine (PAT) system is an innovation in pump technology. It allows the pump to run in reverse as a turbine to harness any wasted energy in the system to generate electricity. ...

... Single Stage Centrifugal Pump > DFEGR-High Efficient hot water end suction pump ...

Flow: 200 l/min
Pressure: 2.84 psi
Power: 190, 186 W

... volume DBMX200 is widely used in fish farming (fish farm air pump). Sewage treatment air pumps is heart of wastewater treatment tank for bacteria to breakdown harmful chemicals and ...

Flow: 3 m³/h - 30 m³/h
Head: 3 m - 20 m
Power: 0.45 kW - 2 kW

... Single-impeller submersible drainage pump, with vertical delivery port. GQR: with open impeller. Double mechanical shaft seal with interposed oil chamber, to protect against dry-running. Applications For clean water ...

Flow: 0 m³/h - 480 m³/h
Pressure: 10 bar - 16 bar
Head: 0 m - 145 m

... Pumped Liquid Pure water, industrial water, sea water, condensate, oils, brines, lyes, hot water Main Fields Of Application For cooling and heating circulating ...

Flow: 1 m³/h - 400 m³/h

... is that it takes special plate as impeller, pump fluid medium from inlet and discharge to the outlet by its Physical viscous driven and special structure of impeller. BOBP-type centrifugal flat impeller pump deliveries ...

Flow: 800 m³/h
Pressure: 10 bar
Head: 60 m

... brackets for the whole range. Only 1 casing cover fits every seal arrengement. Use RC pumps can handle chemical and crystalline suspensions, all viscous liquid, liquid with high concentrations of fibrous suspensions, ...

Flow: 0 l/min - 246 l/min
Pressure: 20 bar
Head: 50 m

... shaft Standard NEMA 56C motors Magnet Material-Samarium Cobalt Applications Industry-Chemical process, deionized water, wastewater treatment, refrigerants and caustics O.E.M.-Washers, filters, chillers, cooling ...

Flow: 10 l/h - 20,000 l/h
Pressure: 10 bar - 350 bar
Fluid temperature: 60 °C - 140 °C

... Three es pumping sets are engineered and patented to work with liquids up to 90°C in the standard version and up to 135°C with cooling. Examples of use are: - Instant steam boiler feed - High temperature steam ...

Flow: 550 l/h
Pressure: 10 bar

... The principle of the TM pump magnet drive is the driving force of the pole-to-pole alignment of 2 magnets. The driven magnet is attached to the pump shaft within the pump, while the driving magnet is ...

Flow: 0.3 m³/h - 86.4 m³/h
Power: 5.5 kW
Input diameter: 25 mm - 150 mm

... MATERIAL FEEDING PUMP
The medium viscosity can reach 1,000,000CP fed by this pump




2.THIN MEDIUM FEEDING PUMP
If the viscosity of the fed medium descends and leakage increases, ...

... hundreds of installations. Materials selected for TF-TOP DIMACO pumps are compatible with hydrocarbons, solvents and corrosive supernatants; TF-BOTTOM is suitable for leachate and DNAPL. Pumps can be fitted with customized ...

Flow: 36 m³/h
Head: 25 m
Input diameter: 80 mm

... Engine Speed (rpm) 3000 Self-priming time (s / 4m) 120 Max. Suction Head (m) 8 Engine Displacement (cc) 296 ...

Flow: 0.001 l/min - 10 l/min
Pressure: 40 MPa
Width: 280 mm

... must be ordered together with the pump. With a flow rate of 0.001-10.00 ml/min and a pressure limit at 40 MPa is this pump suited for analytical applications in liquid chromatography. The pump ...

Fluid temperature: -40 °C - 150 °C

... MP series metering pump, diaphragm hydraulic metering pump, is specifically designed for precise and controlled dosing of chemicals. These pumps are commonly used in various industries, including water ...

... competitive pump designs. ELIMINATES PUMP AND MOTOR ALIGNMENT ISSUES The Compac Series avoids the bearing and pump failures associated with improper motor- pump alignment. The unit’s ...

Flow: 60, 180, 1,200, 2,500, 5,500 l/h
Pressure: 6, 4 bar
Power: 0.2, 0.9, 2 kW

... newly developed K₂P series of intelligent pumps from HOLVES uses four-piston diaphragm pump as the power system, which has the characteristics of low shear and low pulsation. This series of intelligent pumps ...

Flow: 0 m³/h - 150 m³/h
Head: 0 m - 45 m
Fluid temperature: 0 °C - 95 °C

... centrifugal electric pumps are horizontal monobloc pumps with external mechanical seal. Their particular construction with open impeller allows pumping highly acidic or alkaline fluids, including very dirty liquids ...

Flow: 115 l/min

... relief – Maruyama water pump is designed to stand up to commercial challenges. Awesome power, rugged durability and Maruyama’s long experience in pump technology have come together to create an extraordinary ...

Flow: 0.9 l/min - 15 l/min
Power: 105, 165, 195, 210 W

... Low Flow regulator is required, which is also powered by a 12 VDC supply. The Proactive Mini Typhoon, Twister, Mini Monsoon, Super Twister, and Tornado pumps are 12-volt submersible units made of PVC, ...

Flow: 15 l/min
Pressure: 0.15 MPa
Power: 150 W

... are expanding our hydraulic pump portfolio to include electric pumps for cooling, lubrication and ventilation systems. This new pump family will employ a modular design with pumping sections that are ...

Flow: 70, 100 m³/h

... Hygienic centrifugal pump is a type of pump used in the food industry and carries out liquid transfer in a hygienic manner. Hygienic Centrifugal Pumps have the feature of working under ...

Pressure: 0 bar - 3,800 bar

... KMT Waterjet Ultra High Pressure pump series 3800 bar STREAMLINE SL-VI STD KMT Waterjet Ultra High-Pressure entry-level pump 3800 bar For application which do not require a maximum ...

Flow: 400 l/min
Head: 32 m
Power: 0.18 kW - 3 kW

... The MPN Pump Series is particularly suitable for crystallizing media (no air can get inside), toxic or environmentally hazardous media. A small amount of gas in the liquid can also be transferred without ...

Flow: 40 l/min

... Description Self-priming volumetric diaphragms pump. Motor available with 230V or 12-24V DC power supply. Built with a stainless steel pump body and components made of materials suitable for transferring AUS 32 and water. General ...

... Diesel, heating oil, fuel, petroleum, anti freezing liquid for cooler (undilated), thin fluid mineral oils and rapeseed methyl ester. The pump is not suitable for water. Execution for fire brigade with ...

Flow: 11 m³/h
Pressure: 2.1 bar

... Capacitor inside the terminal box • High performance mechanical seal • 8 outlet positions • 5 terminal box positions • 3 pump purge positions (optional) • Single and three phase voltages 50Hz or 60 Hz Performances: Flow rate ...