Water pumps

Flow: 1.5 m³/h - 4 m³/h
Power: 180 W
Fluid temperature: 110 °C

... strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...

Flow: 1.5 m³/h - 6.5 m³/h
Power: 250 W
Fluid temperature: 110 °C

... extremely strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...

Flow: 9 m³/h - 18 m³/h
Power: 1,500 W
Fluid temperature: 110 °C

... strong plastic welding method eliminates the need for gaskets, eliminating the risk of leakage. Pump Protection The filter holder protects the pump from splashes of potentially corrosive fluids, ...

Pressure: 0.05 MPa - 0.3 MPa
Fluid temperature: 20 °C - 60 °C
Weight: 1.1, 1.2, 1.5 kg

This chemical fluid dispensing pump (CFD) is designed to handle wafer liquid of enhanced purity. Chemicals with a high vapor pressure like ammonia water and hydrogen peroxide can be also ...

Flow: 1,600, 1,200 l/min
Pressure: 1.6 MPa
Head: 80, 85 m

The MTFO series is characterized by its wide power range of up to 22kW. The open impeller enables also applications with a solids content of up to 30%.

Flow: 1 l/min - 80 l/min
Head: 28, 20 m
Power: 0.37 kW - 0.55 kW

The MMP series is characterized by the heat and pressure resistance. The bearing made of SIC-D supports the reliability and the freedom from maintenance. High and low temperature media can be transfered without any problems.

Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m

... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation ...

Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m

... wide range of applications and fluid compatibility. These pumps are very suitable for aggressive chemicals with the presence of abrasives. UP03 3/8” AODD pumps make the difference through: • Exclusive ...

Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m

... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...

Flow: 7.6, 4.3, 2.6, 4.1, 7.1 l/min
Pressure: 500 bar - 4,136 bar
Power: 11, 75, 37, 22, 30 kW

... Series is a configurable designed water jet pump that can be custom built based on a variety of options to meet your cutting solution requirements. From the basic model to the fully loaded, the result ...

Pressure: 3,800 bar

... which do not require a maximum pressure of 4,136 bar, KMT WATERJET SYSTEMS offers the STREAMLINE SL-VI STD high pressure pump as a lower priced alternative still featuring KMT's advanced pump ...

Pressure: 3,800 bar

... product life The NEOLINE pump has been developed with the aim of creating a robust, easy to operate pump. It is driven by a 40 hp (29 kW) three-phase motor which is equipped with vibration isolation pads ...

Flow: 0 us gal/min - 200 us gal/min
Pressure: 0 psi - 225 psi
Fluid temperature: 14 °F - 350 °F

... in diameter • Pressures to 2,100 psi; capacities from .02 to 450 gpm Typical Applications • moyno l frame pumps • High-pressure water • Pastes & gels • Food, wastes & by-products • Chemical ...

Flow: 0 l/h - 13,000 l/h
Pressure: 0 bar - 10 bar
Fluid temperature: 0 °C - 80 °C

... combined with the latest peristaltic hose technology results in a heavy-duty pump for the most demanding applications. The EZstrip hose pump is a heavy-duty peristaltic pump with extra-large ...

Flow: 0 us gal/min - 2,200 us gal/min
Pressure: 0 psi - 5 psi
Power: 1.5 kW - 4 kW

... against damage and overloads Typical Applications • Tanker reception • Pump protection • Fat/sludge conditioning • Abrasive sludge maceration • Screenings in waste water

Flow: 0 l/h - 23 l/h
Pressure: 8, 5 bar

... Dura 5 peristaltic pump for high pressure low volume. Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint by ...

Flow: 0 l/h - 39 l/h
Pressure: 5, 8 bar

... 7 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint ...

Flow: 0 l/h - 222 l/h
Pressure: 6, 12 bar

... 10 peristaltic pump for dosing and low flow applications Verderflex Dura The innovative hose pump is highly compact and easy to maintain. Its unique design reduces the footprint ...

Flow: 7, 9, 12 l/min
Head: 3, 5, 8 m
Power: 7 W - 32 W

... Protection Over-voltage protection Typical Applications • Battery cooling water pump • Truck air conditioning cooling • Water dispenser, Water Coolers pump,hot ...

Flow: 23 l/min
Pressure: 0.3 bar
Head: 3 m - 3 m

... engine pre-heating Heating system (Car Auxiliary heaters & parking heaters) Electric vehicles water circulation system Normal Hot Water Circulation Liquid Transfer General Purpose ...

Flow: 7, 12, 9 l/min
Head: 3, 5, 8 m
Fluid temperature: -40 °C - 100 °C

... customized submersible, if submersible liquid should be ≤50℃ 4. can be powered by solar panel directly. 5.E-mobility chargers,EV Charger cable Typical Applications ● Water dispenser, Water ...

Flow: 0 m³/s - 0.375 m³/s
Pressure: 0 bar - 8 bar
Head: 90, 130 m

... configurations, the fiberglass pumps SATURNevo have superior benefits and are ideal for seawater applications and corrosive liquids and atmospheres. Long-coupled "ZGS" or close-coupled ...

Flow: 0 l/min - 40 l/min
Pressure: 8 bar
Head: 0 m - 25 m

... cleaning solutions, inks...) Agriculture industry (hazardous liquids, fertilizers) Seawater applications Water and wastewater treatments (water charged with residues)

Flow: 0 m³/h - 50 m³/h
Pressure: 8 bar
Head: 0 m - 5 m

... self-priming pumps are ideal for pouring operations of non-viscous liquids, unloading chemical products from mobile tanks, and dragging clean liquids or liquids with suspended solids. ...

Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m

... electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal for increasing or maintaining circulating pressures in closed circuit systems. Operation ...

Flow: 5 l/min - 110 l/min
Pressure: 1 bar - 10 bar
Head: 0 m - 100 m

Regenerative turbine electric pumps Hydraulic Performace Stainless steel mechanical seal electric surface pumps with peripheral impeller, ideal for increasing or maintaining circulating pressures at ...

Flow: 5 l/min - 60 l/min
Pressure: 1 bar - 10 bar
Head: 1 m - 120 m

... use with oils, clear and clean liquids without suspended parts or abrasive parts and dilutions inert respect to the pump materials. Fluid use temperatures up to 90 ° for standard versions and 180 ° C ...

Flow: 40, 48 m³/h
Pressure: 10 mbar
Weight: 19 kg

Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.

Flow: 70, 72 m³/h
Pressure: 10 mbar
Weight: 25 kg

Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.

Flow: 120, 100 m³/h
Pressure: 10 mbar
Weight: 35 kg

Cast iron pumping unit with a special flange/shaft pulley assembly, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve.

Flow: 35, 40, 50 l/min
Head: 55, 46, 38 m
Power: 0.6, 0.52, 0.37 kW

... stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or ...

Flow: 35 l/min
Head: 38 m
Power: 0.37 kW

... stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or ...

Flow: 40, 60 l/min
Head: 38, 58 m
Power: 0.37, 0.6 kW

... stribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or ...

Flow: 10 l/h - 750 l/h
Pressure: 0.3 bar - 6 bar
Fluid temperature: 5 °C - 40 °C

... proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...

Flow: 1,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C

... proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...

Flow: 10 l/h - 2,500 l/h
Pressure: 6 bar
Fluid temperature: 5 °C - 40 °C

... proportional volumetric dosing pumps is their ability to use the driving force of water to mix and produce a solution always proportional to the volume of water supplied. This means there’s ...

Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m

... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...

Power: 48 W
Weight: 510 g

... temperature (about 25°C), using a new pump tube that has been aged for 30 minutes to test water, and is for reference only. Ambient temperature, the material and elasticity of the pump ...

Weight: 1.4 kg

... temperature (about 25°C), using a new pump tube that has been aged for 30 minutes to test water, and is for reference only. Ambient temperature, the material and elasticity of the pump ...

Pressure: 100,000 psi
Fluid temperature: 5 °C - 40 °C
Length: 84 in

Cutting speed increased 50% Cost savings 28% Cutting metal thickness 300mm Motor Rating:45kw/60HP Pressure Range (Deadhead):90,000psi(6200 bar) Flow Rate at Max. Pressure:0.78 gal/min Attenuator Volume:2L Length:83.7in Width:53.7in Height:59.3in

Flow: 7.6 l/min
Pressure: 420 MPa
Power: 100 ch

1 PUMP DRIVE 5 CUTTER HEADS INTENSIFIE PUMPS CAN OPERATE A LOW TEMPERATURES IN HIGH-TEMPERATURE ENVIRONMENTS 10 YEARS, TECHNICAL BREAKTHROUGH Motor Rating：75kW/100HP Pressure Range (Deadhead) ：60,000psi Flow ...

Flow: 3.8 l/min
Pressure: 320 MPa - 380 MPa
Power: 50 ch

Adopt servo motor Save on costs 30% Dual intensifier, continuous operation for 24 hours Motor Rating：37kW/50HP Pressure Range (Deadhead) ：60,000psi Max. Flow Rate at Max. Pressure (60 Hz)：1.00gal/min Attenuator Volume：2L Length：67.7in Width：45.6in Height：59.3in

Flow: 2,800 m³/h
Fluid temperature: 180 °C

... radially split pump Product Category: BETWEEN BEARINGS CUP-BB5HP encompasses heavy duty, radially split diffuser type multi-stage pumps..... The ClydeUnion Pumps CUP-BB5HP encompasses ...

Flow: 2,800 m³/h
Fluid temperature: 180 °C

... advanced pump with reduced whole life costs. All the pump internals can be withdrawn quickly without disturbing pump alignment or pipework. This reduces the time required to maintain ...

Fluid temperature: 230 °C

... Category: BETWEEN BEARINGS CUP-BB3 pump is a heavy duty, axial split case, horizontal pump with opposing impellers..... The ClydeUnion Pumps CUP-BB3 pump is a ...

Flow: 115, 145 l/min
Pressure: 15 bar
Power: 1.1 kW

The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...

Flow: 100, 120 l/min
Pressure: 8 bar
Power: 0.35 kW

The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...

Flow: 36, 43, 29, 35 m³/h
Pressure: 10 bar
Power: 1.9, 2.2 kW

The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their ...

Flow: 366.5 m³/h
Pressure: 1,100 bar
Fluid temperature: -40 °C - 200 °C

... The RDP series of Reciprocating Plunger Pumps is suitable for handling most liquids for Oil & Gas, Industrial and Wastewater Treatment applications. RP's RDP pump series ...

Flow: 250 us gal/min - 5,000 us gal/min
Pressure: 40 psi - 519 psi

... multi-stage, turbine pumps for firefighting applications. UL listed and FM approved pump for suction lift conditions. Available with diesel or electric drive. Overview Ruhrpumpen's vertical turbine ...

Flow: 50 m³/h - 3,000 m³/h
Pressure: 420 bar
Head: 200 m - 3,000 m

The SM pump model is a heavy-duty, horizontal, axial split casing, volute type, multi stage, centrifugal pump according to the API 610 latest edition (BB3 type). Designed to be robust and reliable with ...

Flow: 1.3 l/min
Pressure: 7, 238 bar
Weight: 16 kg

... Plastic finishing Main materials Anti-rust Fixatives Base coat Fireproof Intumescents Lacquers Mordants Primer Water / Solvent based products Single or double components protective coating Epoxy resins Vinyl ...

Flow: 150, 110, 70, 20 l/min
Pressure: 2 bar - 12 bar
Height: 680 mm

... transfer pump allows accurate handling and transfer of a wide range of fluids, guaranteeing efficient operation, maximum productivity and the possibility of supplying multiple workstations simultaneously. The P33 1:1 ...

Flow: 70, 110, 150, 10 l/min
Pressure: 2 bar - 12 bar
Height: 1,435 mm

... transfer pump allows accurate handling and transfer of a wide range of fluids, guaranteeing efficient operation, maximum productivity and the possibility of supplying multiple workstations simultaneously. The P31 2:1 ...

Flow: 10 l/min

... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction ...

Flow: 20 l/min

... available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump foot operated for filling off high purity liquids ...

Flow: 4 l/min - 30 l/min

OTAL container pumps are characterized by its basic stopper system that can be used in most common containers. During the pumping process, only the tube comes in contact with the liquid. This means that liquids ...