Weir gate valves

DN: 150, 200, 250 mm
Pressure: 10 bar

The slide valves from Comav are ideally used to cut-off product flow. They are designed to provide an accurate outside sealing, and can work with powder, granules and ground products. Also, the valves ...

DN: 150, 200, 250 mm
Pressure: 67 bar

... emergency gate valves are widely used as safety systems during maintenance work. The valves fitted under the tanks offers easy dismantling of the part below them without the need to ...

Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening ...

DN: 1.5 in - 56 in
Pressure: 0.3 psi - 8 psi
Temperature: -15 °C - 80 °C

... Pressure Sustaining Valve is an automatic, pilot controlled valve that activated by the pressure of the pipeline. The valve will maintain a steady, predetermined pressure at the upstream ...

DN: 2.5 in - 12 in
Pressure: 200, 300 psi
Temperature: 0 °C - 80 °C

... UL Listed NRS Gate Valve - The stems of this Gate Valve are of the non-rising system version. This means that in contrast with its rising system counterpart, the valve ...

DN: 2 in - 12 in
Pressure: 300, 200 psi
Temperature: 0 °C - 80 °C

... Listed OS&Y Gate Valve ,commonly used to control water flow to fire sprinkler systems is known as outside stem and yoke or outside screw and yoke. OS&Y Gate Valve operate ...

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... at the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established ...

DN: 50 mm - 1,600 mm
Pressure: 25, 40, 16 bar

... when they use the double disk floating valve, the oscillations of pressure haven’t any effect on the opening degree of the valve, that closes at the maximum level of regulation. For standard applications, ...

DN: 50 mm - 2,000 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

Di Nicola manufacture gate valves in malleable iron , ductile iron and high nickel alloys for extreme corrosion for over fifty years with sizes from 40 to 1600 mm and nominal pressure 2.5 bar till 25 ...

DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C

Cast iron (GJL 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length ...

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: 120 °C

Cast iron (GJL 250) PN 16 foot valve Viton gaskets. Made in Italy. Fields of application: Fuel - Diesel - Lubricating.

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C

Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning ...

DN: 10 mm - 50 mm
Pressure: 16 bar

DN: 50 mm - 1,200 mm
Pressure: 10, 6, 5, 4, 2 bar

The Knife Gate Valve is a uni-directional wafer valve for general industrial application.It is predominantly used in the paper and pulp chemical industries mining industries ...

DN: 50 mm - 600 mm
Pressure: 10, 4, 6, 5 bar

... The nominal widths available for the knife gate valves range from DN50 to DN600 with flange connections complying with EN 1092 PN10 or alternatively, ANSI B16.5 (class 150). Actuators of Knife Gate ...

DN: 50 mm - 600 mm
Pressure: 1 bar - 10 bar

The type C Knife Gate Valve for bulk material is a unidirectional wafer valve which was designed especially for bulk material technology (powder or granulated materials). The Knife Gate ...

DN: 6 in - 84 in

For High Pressure Differential Applications Description The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas ...

DN: 2 in - 36 in

M&J Valve Expanding Gate (EG) valves can be used in wide range of critical applications, from pipelines to power plants, in ESD and other demanding isolation applications. Description The ...

DN: 3 in - 48 in

The M&J Valve's Compact Expanding Gate Valve is a full opening non-thru-conduit mechanically sealing valve that achieves superior sealing by utilization of a two-piece ...

DN: 0.75 in - 3 in
Flow rate: 0 l/min - 300 l/min

... Bronze valves with seat connections. Packing & Gasket: Asbestos-Free B&G Flo-Control Valves are used for preventing gravity flow in forced water systems and to permit summer-winter operation of ...

DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C

Plastic lined butterfly valves SBP are available in either wafer or lug style for on/off, throttling or control applications for liquid, powdery media or gaseous service. Main features • Large selection of different ...

DN: 89 mm - 300 mm
Pressure: 300 psi
Temperature: -10 °C - 160 °C

1.Design Standard: AWWA C515 2.Nominal Pressure: 300PSI 3.Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2 PN16 or GB/9113.1 4.Epoxy resin coating both inside & outside the body 5.It could ...

DN: 2 in - 12 in
Pressure: 16 bar
Temperature: 0 °C - 80 °C

Z85X Valve is a manually operated,Non rising stem resilient wedge gatevalve designed for use in fire protectionsystems for on/off operation only. Thelightweight ductile iron body allows for bothvertical and horizontal ...

DN: 50 mm - 300 mm
Pressure: 300 psi

1.Design Standard: AWWA C515 2.Nominal Pressure: 300PSI 3.Flange Standard: ASME/ANSI B16.1 Class 125 or ASME/ANSI B16.42 Class 150 or BS EN1092-2PN16 or GB/T9113.1 4.Epoxy resin coating both inside & outside the body

They are simple water intake valves that transmit water to the land in agricultural pressurized irrigation systems. The user can irrigate by connecting the irrigation pipe directly to the outlets of the receiver valve. ...

When water is supplied to the pump outlets and pipelines, air accumulations in the system, especially in the pump outlets, narrow the water passage area and cause a decrease in capacity. Double sphere suction cups are used to avoid this ...

Valves with a shut-off arrangement in the form of a curtain by means of a slide and connected to pipelines to stop the fluid in the pipe. Thanks to the screw shaft mounted inside the body, the valve is ...

DN: 2 in - 84 in

The M&J Valve Model M-303 is an advanced design slab gate valve for high pressure differential applications in the oil & gas sector. It is designed to simplify installation and upgrades, ...

DN: 2 in - 36 in

... Recovery Mainline Block Valves Tank and Station Valves Block & Bleed Valves Manifold Valves Launcher/Receiver Trap Valves ...

The M&J Expanding Gate Valve is a round body cast steel valve with a thru conduit in the open position and is normally manufactured in class 600 & higher. The M&J Compact Expanding Gate ...

DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: 0 °C - 200 °C

gunmetal housing, brass bonnet female pipe thread Standards and Approvals DIN 3352 Technical Data pressure rating PN 16 max. operating temperature 200 °C

DN: 50 mm - 400 mm
Pressure: 1 bar
Temperature: 80 °C

... Orifice Gate™ as the industry standard. It was the first valve specifically designed for handling dry bulk solid materials, and is “the original” orifice gate valve. Purpose: ...

DN: 100 mm - 350 mm
Pressure: 5 bar
Temperature: 120 °C

The HDPV2 Gate was originally developed to isolate silos in applications where high pressure aeration is used to fluidize powder discharge. Over time, the HDPV2 Gate has been redesigned and modified for ...

DN: 50 mm - 305 mm
Temperature: 350 °C

... Pressure Valve™ often replaces deficient slide gates and butterfly valves used in such environments. Key Features Replaceable packing gland for in-line maintenance Spring-loaded ...

DN: 50 mm - 300 mm
Pressure: 20 bar
Temperature: -29 °C - 425 °C

... & bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI 150), 50 bar (ANSI 300) - TS: -29°C/+425°C. SKU MXT-1850143 Body ...

DN: 50 mm - 300 mm
Pressure: 50 bar
Temperature: -29 °C - 425 °C

... & bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI 150), 50 bar (ANSI 300) - TS: -29°C/+425°C. SKU MXT-1870144 Body ...

DN: 40 mm - 700 mm
Pressure: 4 bar - 16 bar
Temperature: -10 °C - 120 °C

Gate valve with bronze seal and position indicator Design according to DIN EN 1171 DIN 3352 T2 Construction length according to: EN 558 Series 14 - DIN 3202 F4 Pressure class: DN40-DN150=PN16 DN175-DN300=PN10 ...

... discharging valve; the downward type is used for the reaction kettle discharging of the frame-type anchor agitator. Upward design discharge valves The upward type discharge valve ...

DN: 1.5 in - 48 in

Stainless Steel Gate Valve Supplier: SS Gate Valves, 1-1/2-48 Inch, CL150-CL2500, API 600, ASME B16.34, ASTM A351 CF8, ASTM A351 CF8M, ASTM A351 CF3, ASTM A351 CF3M. Med ...

DN: 1.5 in - 48 in

Full Port Gate Valve Manufacturer: Cast Steel Gate Valves, Full Port, API 600, ASME B16.34, 1-1/2-48 Inch, Class 150-2500 LB, FF, RF, RTJ, ISO 5211, Carbon Steel, Stainless ...

DN: 0.5 in - 24 in
Pressure: 100 bar - 420 bar

Pressure Seal Gate Valve Provider: Pressure Seal Bonnet Gate Valves, API 600, API 602, ASME B16.34, DIN 3202, 1/2-24 Inch, 600-2500 LB, PN100-PN420, Cast or Forged Steel. Med ...

DN: 2 in - 40 in
Temperature: -29 °C - 450 °C

... parts Advantage: Professional: We are professional manufacturer of valves.Ensure our valves is quality controlled and reliable. Quality Control: We have been engaged in valve ...

DN: 0.25 in - 2 in
Pressure: 16 bar - 100 bar
Temperature: -10 °C - 120 °C

PI 602: Steel wedge gate valve for Sizes 4" and Smaller for the Petroleum and Natural Gas Industries. BS 5352: Specification for Steel Wedge Gate Valves 50 mm and ...

DN: 15 mm - 500 mm
Pressure: 10 bar - 40 bar
Temperature: -29 °C - 350 °C

Bellows sealed gate valve is applicable to the cutting and connection of pipelines medium that are used in various industries such as petroleum, chemical industry , pharmacy, chemical fertilizer, electric ...