Ball valve is evolved from the plug valve, its opening and closing pieces as a ball, using the ball around the axis of the stem rotation 90 degrees to achieve the purpose of opening and closing. The ...
DN: 0.5 in - 2 in
Pressure: 200 psi
Globe valve refers to the valve with the shutoff (disc) moving along the center line of the seat. According to this form of disc movement, the seat opening changes in direct proportion ...
DN: 20 mm - 63 mm
Pressure: 16 bar
Temperature: -35 °C - 120 °C
DN: 20 mm - 63 mm
Pressure: 16 bar
Temperature: -35 °C - 120 °C
The Flow Block® allows the interception of steel pipes, ductile iron, cast iron and stainless steel from DN 3/4” up to DN 2" with interruption of service, the system is used in the following industries: > Gas > Water > District Heating > ...
DN: 2 mm - 17.5 mm
Pressure: 1,400 bar
Temperature: 10 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
DN: 2 mm - 8 mm
Pressure: 1,400 bar
Temperature: -20 °C - 80 °C
... avoid contamination. Specific selection of metallic materials to avoid hydrogen embrittlement. Special hard treatments for Valve stem Leakage test on seat and packing with nitrogen at maximum operating pressure.
... Polymer Valves are suitable for various applications and are an excellent fit for any polymer processing line. BKG® HyFlex™ Shut-Off Valves The BKG® HyFlex™ Shut-Off ...
DN: 0.25 in
Pressure: 5,000 psi
High Pressure Ball Valves Designed for shifting under high differential pressures Features These two new high pressure ball valves provide full unrestricted flow and positive shut-off ...
NEXUS WIRELESS VALVES – Connecting your isolated valves back to the controller, Wirelessly! This product family can provide many solutions from connecting isolated valves to changing ...
Pressure: 5,800 psi
... Check Valves/Dual Safety Circuits dual safety circuits zero leak check valves The block splits incoming clamp line into two circuits. This provides dual safety protection for the bed or slide circuit ...
... operation. These valves are suited for instrumentation, process plant use, oil and gas production and general applications where isolation and positive shutoff is a requirement. For applications ...
DN: 0.5, 1, 1.5, 1.8 m
Temperature: 150, 180 °C
... injection valve ensures straightforward isolation of the mould cavity and vacuum tight sealing, ensuring reliable and clean operation • Careful positioning of the material port allows use in deep mould structures ...
DN: 50 mm - 600 mm
Pressure: 10 bar - 16 bar
Temperature: -40 °C - 200 °C
... Butterfly Valve for Control, Throttling and Shut-off Duties GAR-SEAL® valves are used extensively where corrosive, abrasive, and toxic media need to be reliably controlled. They are ...
DN: 8 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -40 °C - 175 °C
... Unique DV-ST UltraPure diaphragm valves are the natural choice for pharma and biotech industries as well as other hygiene-focused processes. The compact and lightweight valves comprise a series of base ...
DN: 0.25 in - 3.125 in
Pressure: 700 psi
Temperature: -40 °F - 300 °F
... Sporlan Ball Valve is a welded body joint that is factory tested to ensure positive leak-free performance. Dual Teflon seals surrounds the polished, brass ball to prevent leakages. There is an internal relief port design ...
DN: 32 mm - 63 mm
Pressure: 16 bar
Temperature: -10 °C - 45 °C
Ball valve KHW for water Gasket: EPDM 1/4 turns for opening and closing DVGW test mark: DW-6210CQ0059 Note: For this purpose, there is a suitable actuating linkage KBS for wrench Areas of Application The ...
DN: 0.5 in - 2 in
... performance at a great price. All of our valves are easily installed and simple to use. When paired with our valve actuators, they're the perfect solution for fully automated operation. FEATURES All ...
DN: 25, 15, 20 mm
... platform with lever for manual shutoff Bonomi Industries shutoff valve Water shut-off in 5 seconds WaterStop is equipped with a powerful actuator of up to 8.5 N•m ...
DN: 15 mm - 250 mm
Pressure: 16 bar
Temperature: -20 °C - 60 °C
Flange ball valves PS 16 bar Accreditations: Pressure Equitment Directive 2014/68/EU DVGW-G (DIN 3386) for manual shutting off gas accordance with DVGW code of practice G 260, air and water, PS max. 16 bar HTB ...
DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 70 °C
Shut off valve • Temperature class: T30/T50 • Protection сlass: IP68 • Communication with associated water meter: Bluetooth • Indication: LED to reflect valve states • Battery: Lithium ...
on/off valve body for FLOW waterjet cutting machine series number is 010104-1
DN: 20, 25, 32 mm
Flow rate: 4 m³/h - 21 m³/h
... three-way/two-way zone valve ZV is designed for controlling the output of water heat exchangers. Technical Specifications Cylindrical shut-off allows stopping the flow regardless of pressure Option ...
2VV s.r.o.
Temperature: 300 °C
... industrial valves/flaps/dampers. MECHANICAL, PNEUMATIC OR ELECTRIC VALVE CONTROL In the case of smaller nominal widths, the valve blade is normally controlled with a ...
Valve parts made by lost wax casting and machining. Our company produces valve parts for Butterfly valve, Stop valve, Solenoid valve, ...
Pressure: 700 psi - 3,600 psi
... Relief Spray Valve/Shut-off Valve works with all DP 7/8″ threads size airless paint spray guns and extension poles, optional with tip and tip guard, works most other brands of airless ...
DN: 25 mm - 200 mm
Pressure: 10 bar - 16 bar
HYDRANT GATE VALVE S58 Compact gate valve with rubber-covered self expanding split ring seal, suitable for frequent operation with turbid irrigation water. On-off valve type applications: • ...
Please specify:
Help us improve:
remaining