DN: 20 mm - 200 mm
Pressure: 50, 20 bar
Temperature: -50 °C - 427 °C
... Ratings & Connections Flanged: ANSI 150 – 2500, UNI-DIN 10 - 400 Actuators model 87/88 multi-spring diaphragm; cylinder Trim single seat plug top guided; Lo-dB and anti-cavitation trims, single or double stage are available Inherent ...
DN: 8 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -40 °C - 175 °C
Alfa Laval Unique DV-ST UltraPure diaphragm valves are the natural choice for pharma and biotech industries as well as other hygiene-focused processes. The compact and lightweight valves comprise a series of base parts, including valve bodies, diaphragms, ...
... BKG® HyFlex™ polymer valves control your process and guide the melt stream through your processing line with the perfect timing for smooth operation. Whether a simple extrusion-underwater pelletizing line or large systems involving more equipment and ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
System valves made of stainless steel, gunmetal or silicon bronze and accessories for potable water and heating installations. Can be combined directly with numerous Viega press connector systems. Other combinations with connections to G and Rp thread, ...
DN: 0.5 in - 2 in
... Stainless steel or plated brass trim Two-way or three-way Combine with actuators for on/off, floating, or proportional control If actuator is supplied, it is not mounted, allowing access to sweat end connection Valve connection types: threaded, sweat ...
DN: 20, 15, 25 mm
Pressure: 2.5 bar
Ajax WaterStop Jeweller is a smart valve designed to protect facilities from flooding. The valve automatically shuts off the water supply within 7 seconds of a leak being detected, whether by LeaksProtect Jeweller or a third-party detector. Routine water ...
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 3 bar
Temperature: 0 °C - 60 °C
Furon Stopcock SCM2 2 Way Valves from Saint-Gobain provide a simple, reliable solution for fluid handling applications while offering the benefits of its metal-free and elastomer-free, fluoropolymer construction. Our design and application expertise in ...
DN: 32 mm - 63 mm
Pressure: 16 bar
Temperature: -10 °C - 45 °C
... Ball valve KHW for water Gasket: EPDM 1/4 turns for opening and closing DVGW test mark: DW-6210CQ0059 Note: For this purpose, there is a suitable actuating linkage KBS for wrench Areas of Application The FRIALEN-Ball Valve KHW with EPDM-sealing ...
DN: 80 mm - 400 mm
... Overview
- Slide gate valve for solids flow on/off control, designed to isolate or meter bulk ingredients in feed and dosing systems.
- Primarily used as an automatic shut-off for loss-in-weight feeder refill and bulk handling lines.
- Double-acting
DN: 80 mm - 400 mm
... Product description
Shutting off bulk ingredient flow with the Flat Slide 200 slide gate valve from Kubota Brabender Technologie. Designed for solids on/off control and as an automatic refill valve for loss-in-weight feeders.
Technical ...
DN: 80 mm - 400 mm
... Overview
Flat Slide 400 is a flat slide gate valve designed to shut off and control on/off flow of bulk solid ingredients in industrial solids handling systems. It is commonly used as the automatic refill valve for loss-in-weight feeders.
Product ...
DN: 0 mm - 10,000 mm
Pressure: 0 bar - 10 bar
In cooperation with HiP High Pressure Equipment, we offer an extensive range of valves — also known as high pressure valves. With pressures up to 10,000 bar (150,000 psi), we provide a suitable solution for every application.
DN: 0.125 in - 0.375 in
... Product definition and use
- Flow-control valve mounted on the threaded end of spray/nozzle pipes to open/close and adjust coolant flow.
- Can be locked directly to the spray pipe base or inlet to allow operators to quickly control
DN: 0.5 mm - 2 mm
Pressure: 30, 40, 65 bar
The RKE electric ball valve automatically opens or closes the compressed air tank via the control unit or connects and closes areas of the network from the compressed air supply as required. This prevents e.g. an unnecessary start-up of the compressor ...
DN: 50 mm - 1,000 mm
Temperature: -20 °C - 500 °C
The slide valve, alternatively recognized as a gate valve or knife valve, serves as a specialized valve designed for the opening and closing of pipelines within solid material conveying systems. Its fully sealed structure makes it suitable for various ...
... The Flow Block® allows the interception of steel pipes, ductile iron, cast iron and stainless steel from DN 3/4” up to DN 2″ with interruption of service, the system is used in the following industries: > Gas > Water > District Heating > Petrochemical ...
Pressure: 0 bar - 4,200 bar
Temperature: -20 °C - 80 °C
... MCS ® High-Pressure valves were created due to the need to offer high and very high pressure industries with a very high quality product, whose performance is higher than the average. GThanks to their innovatory design and to the introduction of high-quality ...
Pressure: 1,400 bar
... MULTI-COUPLING SYSTEM S.r.l. designs and manufactures oil-hydraulic and hydrodinamic groups and plants for the most varied industrial sectors and for specific applications. The company was established in Legnano (MI), but soon the development of the ...
DN: 8, 14, 10 mm
Pressure: 0 bar - 0 bar
... 1/4 TURN ISOLATING VALVE 2/2 MALE-FEMALE G1/2" D - 29 KV - 5.4 i - 10 Plage de pression (bar) - 0 / 10 Raccord Cote Circuit - 1/2" Ø Nominal - 10 ...
DN: 0.25 in
Pressure: 5,000 psi
... High Pressure Ball Valves Designed for shifting under high differential pressures Features These two new high pressure ball valves provide full unrestricted flow and positive shut-off of fluids under extremely rugged service conditions making them ...
... Explosion isolation flap valves are a simple, economical and very effective solution for cutting off the area where the explosion occurred from the rest of the installation by immediately closing the pipeline. The explosion isolation non-return valve ...
Grupa Wolff
DN: 2,500, 3,000 mm
Pressure: 30, 160 bar
Thanks to a well proven experience, FTM is able to design and produce customized main shut-off and both spherical and butterfly valves as well as pressure relief valves.
on/off valve body for FLOW waterjet cutting machine series number is 010104-1
Epsilon™ is a low-spill dry disconnect coupling, based on a double ball valve system integrating a sophisticated safety design. Beyond the common advantages of a ball valve design, Epsilon provides for product flow through an unrestricted flow path and ...
The SCAT air valve blocks harmful vapours and ensures safe pressure equalisation in the storage tanks of your HPLC. Solvent mixtures remain stable: thanks to closed system without evaporation. The filter membrane keeps solvent and HPLC clean. With Luer-Lock ...
S.C.A.T. Europe GmbH
DN: 0.5, 1, 1.5, 1.8 m
Temperature: 150, 180 °C
... Connecting a Ciject® Injection machine to an inlet port of a typical closed mould. • Design of the injection valve ensures straightforward isolation of the mould cavity and vacuum tight sealing, ensuring reliable and clean operation • Careful ...
DN: 15 mm - 250 mm
Pressure: 16 bar
Temperature: -20 °C - 60 °C
... Flange ball valves PS 16 bar Accreditations: Pressure Equitment Directive 2014/68/EU DVGW-G (DIN 3386) for manual shutting off gas accordance with DVGW code of practice G 260, air and water, PS max. 16 bar HTB PS max. 5 bar (GT5) DN 32 - DN ...
DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 70 °C
... Shut off valve • Temperature class: T30/T50 • Protection сlass: IP68 • Communication with associated water meter: Bluetooth • Indication: LED to reflect valve states • Battery: Lithium battery, up to 16 years lifetime ...
the best suppliers