DN: 50 mm - 400 mm
Pressure: 10 bar
Temperature: 60 °C
... One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For all gases according ...
Herberholz GmbH
DN: 200 mm - 900 mm
Temperature: 250, 400, 800 °C
... Discharge and dosing of free flowing bulk material. Product inquiry Dimensional sheet MATERIAL HOUSING :Structural steel, heat-resistant steel, stainless steelMATERIAL SLIDING PLATE :Structural steel, heat-resistant steel, stainless steelSLIDING ...
Jaudt Dosiertechnik Maschinenfabrik GmbH
DN: 15 mm - 600 mm
Pressure: 1.6, 2.5, 4, 6.4 MPa
Temperature: 200 °C
... Stainless steel globe valve series products are mainly used to cut off (or connect) the pipeline medium. It is suitable for nitric acid, acetic acid and other occasions in chemical industry and other industries. This series of products are produced accord The ...
ChinaTanggong Valve Co., Ltd.
DN: 1 in - 36 in
Pressure: 16 bar - 250 bar
Temperature: 0 °C - 1,200 °C
... The SwitchPlug valve consists of a triple or four-way valve along with an insert underneath and dual or triple outlets in T or Y versions. These valves are mostly preferred for usage in chemical and refining plants to alternate between 2 or more ...
DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C
... Functioning Body material Stainless Steel CF8M (Aisi 316) ACTUATOR Stainless Steel CF8 (Aisi 304) Pipe Size G1/2” – G3/4″ – G1″ – G1 1/4″ – G1 1/2″ – G2″ SEAL PTFE PIPE SIZE ACTUATOR G1/8″ Options 3/2 Command Pilot Visual Positioning Indicator (Standard) Electrical ...
DN: 0.5 in - 48 in
Pressure: 600 psi - 15,000 psi
Pressure balance lubricated plug valves are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection of suitable grease. Thanks to the absence of any body cavity ...
Galli & Cassina S.p.A.
DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: -10 °C - 140 °C
... The INNOVA N-Type valve is a pneumatic shut-off seat valve for hygienic applications. The valve is authorized to carry 3-A symbol. Note: Consult the options of the valves authorized to carry 3-A symbol. Hygienic design according to EHEDG. Gasket ...
INOXPA
DN: 25 mm
Pressure: 16 bar
Temperature: 0 °C - 300 °C
... Flange-Globe valve DN 25 in straight through with bellow flange acc. DIN EN 1092 material grey cast iron DN-JL1040 with Isolation plug seal: - metal design: - straight through with bellow body material: - grey cast iron DN-JL1040 material spindel ...
DN: 50 mm - 300 mm
Pressure: 6 bar - 16 bar
Temperature: -20 °C - 180 °C
... • wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension according EN 558-1 series 20, ISO 5752 series 20, ...
DN: 15 mm - 400 mm
... Pressure Seal Extended Stem Gate Valve With Outside Screw And OS&Y Product Details: Place of Origin: - WENZHOU,CHINA Brand Name: - JIEYU Certification: - API ISO Ts CE Payment & Shipping Terms: Minimum Order Quantity: - ...
Zhejiang Jieyu Valve Company
DN: 0.5 in - 2 in
Pressure: 16, 12.8 bar
Temperature: 120 °C - 200 °C
DRAC ENGINYERS, S.L.
DN: 0.25, 0.125 in
... Made of extruded brass (CLA-360) and forged brass (CLA-377). Ideal for compressed air, oil, water and vacuum systems. Allows the control of ideal flow according to the requirement of the system. ...
Vatac One Piece Uni-body Ball Valves are with compact structure, tight shut-off sealing. Designed and manufactured to the most updated international standards API 6D, ASME B16.34, BS 5351 or equivalents. With standard features of Fire Safe, Anti-static ...
Vatac Valves (Wenzhou) Corporation
Tank Bottom Angle Valve With Washing Pipe is designed based on practical situation of the coal chemical industry. During the development of the product, characteristic of the coal slurry has been taken into consideration as well, This special tank bottom ...
DN: 160 mm
Pressure: 4 bar - 6 bar
Temperature: -30 °C - 150 °C
... GDQ pneumatichigh vacuum angle valve is an electro-pneumatic valve controlled for turn on or shut off the vacuum airflow,the applicable media is air and non-corrosive gases. It has two structures, one is (GDQ-J) angle type and another is (GDQ-S) a ...
DN: 8 mm - 150 mm
Pressure: 16 bar - 64 bar
Temperature: -196 °C - 300 °C
... The ball cover can be connected with the valve stem to form a 90 degree ball core structure. It is mainly used for pipeline switch, emergency cut-off, and ball core V-shaped opening can also be designed to achieve flow regulation function. Design standards: ANSI ...
Pressure: 140 bar
... sériés globe valve is mainly used in hydraulic pipeline or hydraulic integrated system to control the flow of oil or cut-off, its valve core is conical seal and hydraulic balance type, with small opening force, good sealing performance and other characteristics. This ...
... DC24V Al-Alloy Material on-off electric butterfly Valve, electric actuator with Ce/CSA/RoHS Certificate Features: Name: On-off Electric Butterfly Valve Standard Time/Torque: 20S/50Nm Motor Power: 13W/10W/6W Rated Current: 0.07~1.5A Power: DC24V/AC24V/AC110V/AC380V/AC220V Protection ...
Dynamic Corporation Limited
The 5L regulation valves are the ideal partner wherever the flow of gas or liquids need to be regulated. Due to the special design it is able to regulate and shut off media. Thanks to its light and compact design it can be used in panel mounting. It is ...
Pressure: 0 bar - 16 bar
Temperature: 50 °C
Flow rate: 1,570 l/min
... The block device is particularly useful during maintenance operations. It prevents the system from being accidentally or wrongly pressurized. It can be wall mounted using the relative holes. Discharge connection: G 1/8”. Maximum inlet pressure: 16,0 ...
Aircomp by Stampotecnica
DN: 50 mm - 600 mm
Pressure: 0 bar - 8 bar
Temperature: -20 °C - 100 °C
... Proval V101-SC series inflatable seated actuated butterfly valves that are highly resistant to mechanical wear are available in wafer and lug styles with seat in EPDM, Silicone, NBR or highly abrasion resistant White SBR to suit individual applications. ...
Doruk Endustri Ltd.
DN: 7, 10, 13, 20 mm
... Series 3030 and 3060 valves are safety accessories according to the definition contained in Directive 97/23/CE and are subject to the requirements of the Directive. These valves are conventional unbalanced direct load safety valves. Series 3070 rupture ...
CASTEL
DN: 20 mm - 110 mm
Pressure: 16 bar
Temperature: -40 °C - 80 °C
... Socket Fusion PE Stop Valve Material:polyethylene(HDPE) Joining: Socket fusion welding Materials - Polyethylene(PE)/High Density Polyethylene(HDPE) Standards - ISO4427,AS/NZS4130,DIN8074 About packing: For the pipes, we pack ...
DN: 40 mm - 100 mm
Pressure: 4 bar - 10 bar
Temperature: 130, 150 °C
... RIEGER offers as a special on the market this variant of the double seat bottom seat valve, in addition, the function of a changeover valve is realized. The advantage over the usual pass dual seat bottom seat valves is that the pipeline during filling ...
DN: 0.5, 0.75, 1 in
Pressure: 1,000,000 Pa
Temperature: -20 °C - 80 °C
This product comes with many features and functions. When there is an alarm, the valves will close automatically in response to a leakage. The power supply comes with 2AA, five batteries. When the power is too low, the alarm is triggered and the valves ...
Taizhou Tonhe Flow Control Equipment Co.,ltd
the best suppliers