Shut-off valves

DN: 2 mm
Pressure: 250 bar - 400 bar

... Internal tightness : Mini 10-3 mbar.l/s with helium (Valve / Seat) External tightnes: Mini 10-4 mbar.l/s en helium KV with a one bar presssure loss ( ΔP = 1 bar) : - Internal diameter Ø 3,2 mm : KV = 0,23 - Internal diameter Ø 4,2 mm : KV = 0,40 ...

DN: 0.25 in - 4 in
Pressure: 13.8 bar

... 1/4 to 4 in. (8 to 100mm) Description: Series GV, GVS Bronze Gate Valves are used in commercial and residential applications. They feature bronze body construction, non-rising brass stem, Teflon packing, threaded IPS bonnet, bronze disc, and cast iron ...

DN: 5 mm
Pressure: 0.5 bar - 10 bar
Temperature: 5 °C - 75 °C

... 2/2-way, latching cartridge valve with a nominal orifice DN 5 with a mechanical valve actuation. By manual operation, at a push of a button so to speak, the valve opens and closes. The manual actuation enables innovative user concepts for sanitary applications ...

DN: 12, 6 mm
Pressure: 0 bar - 500 bar
Temperature: -20 °C - 60 °C

... C2.940 High-pressure shut-off valves C2.940 High-pressure shut-off valves max. operating pressure 500 bar nominal diameter: ND 6 and 12 temperature range: 40º ... + 100ºC ports: G1/4 or G1/2 ...

DN: 6.5 mm - 15 mm
Pressure: 1.5 bar - 10 bar
Temperature: -20 °C - 180 °C

Unidirectional blocking valves are safety devices which can block the cylinder rod when, accidentally, the pressure fails. Bidirectional blocking valves are used to block the cylinder rod when the bistable 5/2 valve that controls it has deenergized pilots. ...

DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C

Designed for controlling a broad range of flow rates of liquids and gases, CV™ Utility valves are available in three conveniently overlapping orifice-needle sizes. These versatile, rugged and reliable, valves are suitable for laboratory instrumentation, ...

DN: 50 mm - 1,400 mm
Pressure: 20 bar - 420 bar
Temperature: -46 °C - 190 °C

... Lower emissions and improve profitability CAMERON T30 Series fully welded ball valves reduce the total cost of ownership by minimizing fugitive emissions, simplifying maintenance, and eliminating valve replacement or upgrading at a later date to satisfy ...

Pressure: 3 bar - 5 bar
Temperature: -20 °C - 100 °C

... These valves are similar to "SHUT OFF" valves for SMX metering element. The difference is that are not connected to metering elements but mounted directly on the feed to create different sections or zones of the system. The valves can be either: electrico ...

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 5 °C - 80 °C

... Torque limiter Limit Stop prevents the valve against sticking, when it is open for a longer period Silicone-free Zero dead leg valve Suitable for slurries and abrasive media Suitable for viscosity or solid content applications ...

DN: 80 mm - 1,200 mm
Pressure: 10 bar - 100 bar
Temperature: 600 °C

Somas butterfly valves helps to control your flow! Steam, gas, water or other fluids, Somas butterfly valves can handle them all. The valves are made of high quality stainless steel with a homogenous metal seat. They are installed by mounting between ...

DN: 50 mm - 300 mm
Pressure: 0 bar - 10 bar
Flow rate: 90 m³/h - 3,498 m³/h

... Testing & Inspection: In accordance to ISO 5208. Pressure Temp. rating: As per ANSI Class150. End Connections: Suitable for holding between the Flanges of ANSI B16.5, Cl.150. Characteristic: On-Off. For Air, Water, Oil, Gas, some Chemicals, Low pressure ...

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 420 bar
Temperature: -20 °C - 400 °C

The CP-06 offer a wide array of needle valves that are specifically constructed to be applied with liquids that both posses high pressure and temperature service. Fabricated from AISI-36 stainless steel, these valves' back-seated stem enables the free ...

DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 100 °C

... Shut/off ball valve to control the flow of hot and cold water and Glykol solutions (max. 30%) in HVAC systems conjunction with a rotary actuator Technical data Valve Flow disc : without flow disk Media : - hot and cold water (VDI 2035) - water with ...

Ball valves are long lasting and can work perfectly even you are operating it for years most especially the metal-seated ball valves which can meet the highest requirement. It is recommended for shut-off applications because it is easy to repair and can ...

DN: 1.5 in - 2.5 in
Pressure: 41.4 bar
Temperature: 400 °F

... The NIBCO® bronze ball valve provides bubble-tight shutoff at 600 PSI. The three-piece valve is ideal for hot/cold water, numerous gas applications, compressed air, vacuum service, condenser and chilled water. It may be used for isolation and throttling ...

Temperature: 50 °C

Shut-off and control penstock with a compact design (closed frame design); four-side sealing, made of stainless steel, for wall mounting. Especially sturdy design with separate sliding and sealing system. Suitable for use in wastewater applications, water ...

DN: 15 mm - 100 mm
Pressure: 63, 50 bar
Temperature: -20 °C - 160 °C

... Shut-off valve is made of three stainless steel parts with floating precision ball. The valve is operated pneumatically (double- and single-acting) and is characterized by a long service life and high operational safety. PRODUCT FEATURES Full passage Maintenance-free Optionally ...

The HPS®, manufactured by MKS Instruments, is a type of isolation valve. The manufacturer is a great provider of bellows, manually, pneumatic or electro pneumatic valves. These valves are placed in a heated or unheated angle and inline configurations. ...

DN: 40 mm - 300 mm
Pressure: 10 bar - 16 bar

... DN 40 - 300 PN 10 - 16 Body: EN-JS1050 Coating: Epoxy Resilient-seated gate valves according to European standard EN 1171 with straight, smooth and non-constricted passage. Internally enamel, externally EKB. For water, air and non-aggressive gases. ...

DN: 3 in - 5 in

The Chalwyn SVX hazardous area series of butterfly air intake shutoff valves are ATEX approved for Zone 1, Gas Group IIB, T4 or Zone 21 hazardous area applications. The 12 and 24VDC valves are designed with “fail safe” actuation. The valve is held open ...

DN: 0.25 in - 2 in
Pressure: 300 psi

... ROSS L-O-X® valves are energy isolation valves and are generally used as the first valve in a line supplying compressed air to equipment. Air can be shut off by pushing the L-O-X® handle inward; downstream air is simultaneously exhausted through the L-O-X® ...

DN: 0.5 in - 2 in

Lead Free Bronze RS Gate Valve with Press Connections, 200 CWP, Sizes: 1/2" to 2"

DN: 25 mm - 150 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 60 °C

The BM5 Slam-Shut Valve is suitable for integration as a safety instrument in gas distribution piping and regulating stations. It is an auto shutoff equipment that is efficient in propane, butane, city gas or nitrogen controlling or distribution installation. ...

DN: 15 mm - 200 mm
Pressure: 16 bar - 40 bar
Temperature: 0 °C - 400 °C

... Nominal diameter DN 15 .200 Nominal pressure PN 16,25,40 Body made of sph. cast iron EN -GJS-400-18-LT, EN-GP-240-GH Bellows seal (TA-Luft') with safety stuffing box High Kvs-values (favorable Zeta-values) High seat tightness External threaded spindle Handwheel ...

Pressure: 50 bar - 1,200 bar
Flow rate: 50 l/min - 600 l/min

... The electrical high-pressure switching valve for quick shut-off of bypass or consumer lines. Available in different operating voltages. Special features: Very fast cycle time, no pneumatics required, cascadable. TECHNICAL SPECIFICATION •Dimensions: ...