Chandler Equipment Inc.
DN: 1 in - 4 in
... Amarama Engineers Ball type Flush Bottom Tank Valves are used for discharging of material from reactor vessels and tanks. Our Ball type Flush Bottom Tank Valves are available in full bore, reduced bore, manual & actuated with FLP solenoid valves, limit ...
Amarama Engineers
DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -60 °C - 200 °C
... One piece ball/stem full bore system for superior performance Lining options for abrasive applications PVDF and UHMW-PE Maintenance-free and adjustable gas-tight stuffing box packing Face to face dimensions - DIN EN 558-1 Actuator connection ...
DN: 15 mm - 100 mm
Temperature: -40 °C - 120 °C
... Excellent Sealing Property The DIAPHRAGM VALVE TYPE 14 uses a high quality rubber material,exhibiting lower compressive strain, for its diaphragm and cushion,resulting in optimum sealing performance. Tight Seal at Low Torque Using dynamic analysis ...
DN: 0.5 in - 24 in
... Gate Valves serve as efficient stop valves with flow in either direction. They are commonly used when minimum pressure drop is important. Throttling is not recommended because partially open gate valve might have flow characteristics not conductive ...
A Ball valve is a quarter-turn valve used for shut-off application. The valve opens and closes the flow of the fluid via a built-in ball, that rotates inside the valve body. Ball valves are industry standard for on-off applications and are lighter and ...
TECNOGROUP
DN: 15 mm - 150 mm
Pressure: 40, 16 bar
Temperature: -40 °C - 200 °C
... Fully lined Ball Valves for shut-off and control of corrosive, permeating liquids or gaseous media. Main features • Two-piece body, metal-to-metal joint • Anchored lining with positive locking to body • Dynamic, maintenance-free shaft sealing acc. ...
Swissfluid AG
... RUPTURE VALVE TYPE B – TYPE G – TYPE R; OVERFLOW VALVES TYPE G – TYPE R IN COMPLIANCE WITH THE STANDARD 2014/33/UE The rupture valves type 3006 interrupt the downward travel of the plunger in case of an over speed situation of the car. The valves ...
Valves with a shut-off arrangement in the form of a curtain by means of a slide and connected to pipelines to stop the fluid in the pipe. Thanks to the screw shaft mounted inside the body, the valve is opened and closed by moving the slide up and down. ...
DN: 20 mm - 63 mm
Pressure: 16 bar
Temperature: -35 °C - 120 °C
DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C
... A screw-in, cartridge-type, variable orifice, flow restrictor hydraulic valve. Operation The NV08-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed ...
Hydrabase
DN: 0.5 in
Every wetkit is completed with hoses and adaptors of various types. Hyva offers a wide range of high quality parts dedicated to various truck related applications. These components are also critical from the quality point of view as they directly influence ...
DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C
... Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services (AP10HP) ● Ball valve with heating jacket (AP11) Each model ...
Penta Srl
DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... wetted metal parts made from dezincification-free and corrosion-resistant gunmetal, resistant against aggressive water 10 year warranty maintenance-free shaft sealing with self-lubricating EPDM lip gasket, replaceable under pressure up to ...
Kemper Olpe GmbH
Pressure: 0 bar - 500 bar
... Air actuated ON-OFF Valves Designed to be used in steel working and metallurgical industries Stroke regulation up to size 09 Very Smooth valves response (No shocking impact) Easy maintenance Metal to metal seal 5/2 way air solenoid valve kit ...
Pressure: 20,000, 10,000, 15,000 psi
High Pressure Equipment offers two styles of ball valves (free floating and trunion) to provide effective shut-off of liquid or gas flow. Two-way ball valves offer complete shut-off with a convenient 1/4 turn. Valve actuators are available for remote ...
DN: 2 in - 48 in
... Reliable operation Longer wear life Open Body Design ejects material from the bottom and prevents the gate from jamming 100% bubble tight seal Reduced operation costs Applications Mining and mineral processing Mineral Sands Cement Sand and Gravel Coal ...
DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C
... Our shut-off valves are designed primarily for incorporation in pump suction pipes and in the basic version have an SAE mounting face with connecting dimensions complying with SAE-Norm J518 - 3000 psi. The key feature: Thanks to clamping bolts inside ...
DN: 80 mm - 125 mm
Pressure: 16 bar
... STANDARDS OF MANUFACTURE EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 1092-2 (ISO 7005-2) DRILLING FLANGES MATERIALS BODY FIG.11-12-13 – CAST IRON EN GJL-250 EN 1561 FIG.11S-12S-13S – DUCTILE IRON EN GJS-400-15 EN ...
ACMO S.p.A.
DN: 50 mm - 600 mm
... Ductile Iron Full Lug Butterfly Valves Size: 2 to 24 in. (50 to 600mm) Description: These soft-seated butterfly valves are designed for a variety of general applications in the control of water, air, oil, gases, and corrosive media. They are equally ...
DN: 0.5 in - 2 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 200 °C
... EXCELLENT FLOW RATE EXCELLENT EXTERNAL SEALING EXTERNALLY PRESSURE ACTUATED TIGHT SHUTOFF & LONG SERVICE LIFE DAMPED CLOSING (ANTI WATER HAMMER) VISUAL POSITION INDICATOR & SWITCHES UP TO 370 PSI (25 BAR) OPERATING PRESSURE DESIGNED TO INTERNATIONAL ...
Indumart
DN: 1, 0.75, 0.5, 0.25, 0.375 in
Temperature: 0 °C - 100 °C
... BUENO's PTFE Needle valve is Designed with simplicity and easy of installation. Excellent chemical resistance Ideal for use with instrumentation fitting as a sample valve Wide range of operation temperature: 32°~212°F (0°~100°C) PTFE ...
DN: 20, 15 mm
Pressure: 16 bar
Temperature: -20 °C - 90 °C
... Built-in valve, F/F threaded, with stop cock, with protection cover.
DN: 50 mm - 305 mm
Temperature: 350 °C
... The Titan Pressure Valve's unique "rising blade" is designed to close into an end seat. This provides an optimal seal of high pressures and a positive material shut-off. Ideal application: Higher-temperature and/or higher-pressure applications handling ...
Vortex Global
DN: 50 mm - 300 mm
Pressure: 20 bar
Temperature: -29 °C - 425 °C
... 97/23/EC directive N°0036 - Risk category III / module H - A216 WCB cast steel body & bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI 150), 50 bar ...
MerxTrade BV
DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C
... 304 SS Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical / pharmaceutical industry • Chemical waste burning plant • Fire-protection ...
pneumaticairactuator.com
DN: 0.5 in - 4 in
... - PVC-U = Unplasticised Polyvinylchloride Gaskets - EPDM Manufacture - Injection moulded ...
DN: 0.375 in - 2.5 in
Pressure: -0.9 bar - 16 bar
Temperature: -20 °C - 80 °C
... FARBO, ever following the best performances, renews a new pneumatic globe valves series. Cheaper and compact, they allow to reduce encumbrances and costs. Available with brass body, as standard they are supplied with gasket with wiper function to be ...
Farbo
DN: 0.25 in - 4 in
Pressure: 40, 25 bar
Temperature: -10 °C - 150 °C
... Full bore brass ball valve Diameters from DN008 - ¼" to DN100 - 4" Threaded F/F (ISO 228/1) Design according to MSS-SP-110 Air testing according to EN12266-1 Blow-out proof stem, adjustable packing With handle or butterfly (up to DN≤50) ACS, VA ...
VIR
DN: 0.5 in - 40 in
... High Temperature Trunnion Ball Valve Fabricator: Metal-Seated Trunnion Mounted Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. High Temperature Trunnion Ball Valve Cast Steel Trunnion Mounted Ball Valves allow easy ...
China MED Valve Co., Ltd.
DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C
... Design Standard Based on API 6D and Customer requirements Pressure Rating ASME 150 - ASME 2500 End Connections As per API 6D standard 1) Anti-fire safe design: API 6FA, API607 2) Anti-static device The static-conduction spring ...
DN: 0.45 in - 1 in
Pressure: 16 bar
Temperature: -40 °C - 160 °C
The Siral BSD3000 is a double ball valve with by-pass, service and drain functions, intended for hot/cold water, steam and glycol (50% content). It is capable of withstanding a maximum pressure rating of PN16 at temperatures from -40 to 160 °C. It is ...
DN: 0.25 in - 0.5 in
Pressure: 0 bar - 440 bar
Temperature: -29 °C - 38 °C
Our Pressure Gauge series valves are flow regulation valves that isolate pressure gauges, purges, pressure switches and other instrumentation devices. They allow flow to enter the instrument without damaging it smoothly. If they have a bleeder plug, it ...
Redfluid SL
DN: 50 mm - 400 mm
Pressure: 10 bar
Temperature: 60 °C
... One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 For all gases according ...
Herberholz GmbH
DN: 200 mm - 900 mm
Temperature: 250, 400, 800 °C
... Discharge and dosing of free flowing bulk material. Product inquiry Dimensional sheet MATERIAL HOUSING :Structural steel, heat-resistant steel, stainless steelMATERIAL SLIDING PLATE :Structural steel, heat-resistant steel, stainless steelSLIDING ...
Jaudt Dosiertechnik Maschinenfabrik GmbH
DN: 15 mm - 600 mm
Pressure: 1.6, 2.5, 4, 6.4 MPa
Temperature: 200 °C
... Stainless steel globe valve series products are mainly used to cut off (or connect) the pipeline medium. It is suitable for nitric acid, acetic acid and other occasions in chemical industry and other industries. This series of products are produced accord The ...
ChinaTanggong Valve Co., Ltd.
DN: 1 in - 36 in
Pressure: 16 bar - 250 bar
Temperature: 0 °C - 1,200 °C
... The SwitchPlug valve consists of a triple or four-way valve along with an insert underneath and dual or triple outlets in T or Y versions. These valves are mostly preferred for usage in chemical and refining plants to alternate between 2 or more ...
DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C
... Functioning Body material Stainless Steel CF8M (Aisi 316) ACTUATOR Stainless Steel CF8 (Aisi 304) Pipe Size G1/2” – G3/4″ – G1″ – G1 1/4″ – G1 1/2″ – G2″ SEAL PTFE PIPE SIZE ACTUATOR G1/8″ Options 3/2 Command Pilot Visual Positioning Indicator (Standard) Electrical ...
DN: 0.5 in - 48 in
Pressure: 600 psi - 15,000 psi
Pressure balance lubricated plug valves are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection of suitable grease. Thanks to the absence of any body cavity ...
Galli & Cassina S.p.A.
the best suppliers