Shut-off valves

DN: 0 mm - 10,000 mm
Pressure: 2,500 bar - 4,200 bar
Temperature: 5 °C - 50 °C

... Product description
Needle valves provide a reliable means to shut off and regulate media. Designed specifically for extreme high‑pressure applications, these valves are used in demanding hydraulic systems such as hydroforming and waterjet cutting.

Advantages

• Bidirectional

DN: 3.18 mm
Pressure: 1.4 bar
Temperature: -73 °C - 232 °C

... Wherever the media flow within a pipe system needs to be manually shut off or opened in both directions, WEH® needle valves perform this function with absolute reliability. The valves are extremely smooth-running and durable, as the valve needle and the ...

DN: 3.18 mm
Pressure: 1.4 bar - 6.9 bar

... Product description
WEH® pneumatic needle valves with pneumatic actuation are used where manual operation is not desired. They are suitable for integration into automated systems and are designed for medium-pressure applications.

Features

• Angled

DN: 20, 50, 25, 40 mm
Pressure: 16 bar

... Short description
Single union ball valve with quick coupling for P.E.

Product details

• Type: Compression Valves
• Brand: COMER by NEISCO
• Category: Compression Valves
• SKU:

DN: 25 mm
Pressure: 10 bar

... Product description
Single union ball valve with male threaded ends for isolation and flow control in uPVC piping systems.

Product information

• Type: UPVC Ball Valves
• Brand: U-PVC Ball Valves
• Category:

DN: 15 mm - 100 mm
Pressure: 10 bar - 16 bar

... Product overview
Single union UPVC ball valve BVSL13 designed for fluid isolation in industrial piping, water treatment and chemical installations. Features an adjustable seat and BS male plain ends for simplified installation and maintenance.

Product ...

Pressure: 10 bar
Temperature: -5 °C - 70 °C

Should a sudden pressure failure happen. if the stop valves are assembled in pairs on the cylinder. the stop valves make sure, that the cylinder piston rapidily stops. By operating the override device, it is possible to reset manually the piston stroke. ...

DN: 30 mm

... Valves with ball shutter Valves with ball shutters activate suction, creating vacuum in the cups on which they are applied, only when the load to be held activates the sealing shutter. They are made of an anodised aluminium body, a nylon ball shutter, ...

DN: 0.125, 0.25, 0.375 in

... Shut-off valves These are special one-way valves that, when properly calibrated, allow a certain quantity of fluid to go through; afterwards, if the fluid continues to go through, they automatically close. These shut-off valves have been specially designed ...

DN: 0.25 in - 1.5 in
Pressure: 0.5 mbar - 3,000 mbar
Temperature: -5 °C - 60 °C

... Servo-controlled 3-way vacuum valves These 2-position, 3-way valves feature pneumatically activated conical shutters. They can be used normally either closed or open. They are recommended in all the cases that require a quick exchange between the vacuum ...

DN: 4, 12, 10, 8, 6 mm
Pressure: 0 MPa - 0.9 MPa
Temperature: 0 °C - 60 °C

... Hand Valve turns on and off air pressure to pneumatic devices. Three-directional control valve, which discharges the residual pressure, and two-directional control valve is available. Hand Valve turns on and off air pressure to pneumatic devices. The ...

DN: 6, 3, 4 mm
Pressure: -750 mm/Hg - 5,250.4 mm/Hg
Temperature: 0 °C - 60 °C

... Ball Valve turns on and off air pressure to pneumatic devices. Easily adjustable lever with scale. The flow rate can be adjusted roughly by setting the angle of the lever. ...

DN: 6 mm - 100 mm
Pressure: 0 bar - 40 bar
Temperature: -40 °C - 185 °C

... Universal stainless steel globe valve

The pneumatically actuated GEMÜ S40 globe valve is designed for use in industrial applications and has body shapes such as angled and straight seat bodies. The valve spindle is sealed by a self-adjusting sealing ...

DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 60 °C

... Universal angle seat globe valve with plastic handwheel

The 2/2-way angle seat globe valve GEMÜ 507 has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing ...

DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10, 180 °C

... Universally compatible angle seat globe valve with plastic actuator

The 2/2-way angle seat globe valve GEMÜ 554has a plastic piston actuator and is pneumatically operated. The valve spindle is sealed by a self-adjusting gland packing or a compact ...

Pressure: 30 psi
Temperature: 32 °F - 180 °F
Flow rate: 8, 0 l/min

... A proportional isolation valve like no other... Utilizing the industry's most robust and powerful miniature linear actuator, the patent pending stepper-controlled Eclipse proportional isolation valve leads the industry in performance and durability. ...

Pressure: 2 bar
Temperature: 0 °C - 70 °C
Flow rate: 60 l/min

NIV series multi-channel gradient valves feature multiple 2-way, normally-closed PTFE media isolation valves connected around a central body. This unique design provides significant reduction in internal volume with enhanced mixing capabilities. Each ...

Pressure: 7 bar
Temperature: -34 °C - 82 °C
Flow rate: 10 l/min - 180 l/min

Like the NIV and PIV series, the AIV series features Clippard’s unique multifunctional valve stem design for longer life and minimal dead volume. The difference with the AIV series is that it also provides the added benefit of air operation, which is—by ...

DN: 15 mm - 250 mm
Pressure: 10 bar - 100 bar
Temperature: -60 °C - 350 °C

... The sliding gate control valve type 8021 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can perfectly be handled. Size: DN 15 - DN 250 ...

DN: 15 mm - 250 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 350 °C

The sliding gate control valve type 8043 in a reinforced version and long design with piston actuator and integrated positioner is due to its compact design universally applicable for neutral and aggressive media in the chemical industry, process engineering ...

DN: 15 mm - 125 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 230 °C

This compact motor valve is used in a wide range of process engineering control tasks. It is particularly characterised by its very short design. Most media such as steam, fluids, gases, etc. can be excellently controlled with it. This inexpensive version ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... DIALOCK® diaphragm valve with stroke limiter and male ends for solvent welding, metric series. The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... Pneumatically actuated diaphragm valve with male ends, metric series. Normally Closed function. The DK diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body significantly ...

DN: 40, 100, 50, 65, 80 mm
Pressure: 16, 10 bar
Temperature: 0 °C - 60 °C

... Butterfly valve with multi-volt electric actuator 90-240 V AC 50-60 Hz. The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water conveyance applications. In addition to the manually actuated version, FE is also ...

DN: 20, 15, 25 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C

... HEATING / COOLING / SANITARY WATER ON-OFF and modulating functioning, with 1 extra free micro switch on opening 2-3 points control actuator with relay Class protection: IP54 Operating time: 35 sec for 90° rotation 2-way MM BRASS ball valve ...

DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C

... ON-OFF functioning, with 1 extra free micro switch on opening 2 points control actuator with relay Operating time: 45 sec for 90° rotation – 8Nm Fast push connection ...

DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C

... HEATING / COOLING / SANITARY WATER ON-OFF and modulating functioning, with 1 extra free micro switch on opening 2-3 points control actuator with relay Class protection: IP54 Operating time: 35 sec for 90° rotation BY-PASS BRASS ball valve ...

DN: 0.5, 0.75, 1, 1.25, 1.5 in
Pressure: 25 bar

... For oxygen, for the manual interruption of gas supply lengths: 65, 120 mm weights: 1.030 / 1.800 g Approvals EN 9539 ...

DN: 10 mm - 50 mm
Pressure: 4.2 bar - 8 bar
Temperature: -20 °C - 80 °C

... The pneumatically operated ball valve possesses a minimum working temperature of -15 °C and a maximum of +150 °C. It consists of a body fabricated from either brass or nickel, a ball made out of brass or chrome and a handle constructed out of aluminum. ...

DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar

The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve is moved to the “OFF” position, the outlet is exhausted to the ...

DN: 1.78 mm
Pressure: 500 psi

... Beswick’s miniature ball valve is an excellent choice for applications requiring a compact on/off valve. This design offers small size, light weight, and non-restricted flow. Approximate Weight: About 9g in stainless steel. Porting: 10-32 internal ...

DN: 1.78 mm
Pressure: 500 psi

... Beswick MBVT-1414 is a miniature ¼-28 threaded selector ball valve this is manufactured using stainless steel materials. It is an excellent choice for application requiring a port selection valve. The MBVT-1414 allows bi-directional flow between a common ...

DN: 25, 32, 40, 50 mm
Pressure: 20.7 bar

... Product Overview
The HTD Test and Drain Valve is a compact three-in-one valve combining shut-off, test and drain functions for wet pipe fire sprinkler systems. UL Listed and designed to meet NFPA requirements, it provides a space-saving alternative ...

DN: 0.375, 0.5, 0.125, 0.25 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

... The stop valve is a pneumatic device that locks the cylinder’s stroke in case of pressure loss in the system. The valves are mounted directly on the cylinder’s supplying ports and do not interfere with the functioning of the cylinder. ...

DN: 0.25, 0.375, 1, 0.5, 0.75 in
Pressure: 15 bar
Temperature: -10 °C - 50 °C

... The product has a maximum pressure of 15 bar, with a minimum temperature of -10 /and goes up to +50° C. This valve uses air as a fluid medium. To continue, 6bar flow rate with ∆p 1bar, in which 1 is 1850 Nl/min, 2 is 3000 Nl/min, and 3 is 5200Nl/min. ...

DN: 16 mm

... Ball valve in action Ball valve VKE 16, stainless steel, KF DN 16 Valves of the VK series are sturdy isolation devices for the rough and fine vacuum range. A precisely machined ball with a hole through the middle is rotated by means of shaft and lever. ...

DN: 50 mm - 150 mm

Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The REDEX® slide valve is suitable for the isolation of fully developed explosions to the maximum ...

DN: 50 mm - 500 mm

Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The RSV slide valve is suitable for the isolation of fully developed explosions to the maximum ...

DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C

Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, position indicator with integrated ...

DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C

Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, position indicator with integrated ...

DN: 15 mm - 200 mm
Temperature: -20 °C - 140 °C

Diaphragm valve to DIN/EN with flanged ends, in straight-way pattern; shut-off and sealing to atmosphere by diaphragm; hydraulically favourable full bore body with coating or lining, position indicator with integrated stem protection. From DN 125 with ...

Pressure: 13 bar - 50 bar
Temperature: -29 °C - 204 °C

Pressure: 3 bar - 35 bar

Pressure: 25 psi - 250 psi
Temperature: 71 °C

DN: 0.11 in - 0.56 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C

... MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped with regulating stem. A special feature is the non-rotating stem which ensures a long life and thus ...

Temperature: -20 °C - 40 °C

... Vacuum Valves, 3 Channels, AG Series . Connection on the vacuum network . Electric control . Voltage: 12 VDC / 24 VDC ou 24 VAC / 110 VAC / 220 VAC . NO or NC for the vacuum or compressed air supplied servo Characteristics . Fluid : Non-lubricated ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

... ELECTROHYDRAULIC ON/OFF VALVE The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper chamber in order to close the main valve or, alternatively, drains ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

... PUMP CONTROL VALVE The valve isolates pumps from the system during pumps starting and stopping to protect pipe lines and pumps itself. The valve is equipped with a control solenoid valve that is switched on at pump starting and is able to fulfill pipe ...

DN: 50 mm - 600 mm
Pressure: 40 bar
Flow rate: 16 m³/h - 5,400 m³/h

... PROPORTIONAL PISTON ACTUATED VALVE DESIGNED FOR HIGH DIFFERENTIAL PRESSURES The valve maintains downstream pressure to a constant and pre-set rate of upstream value. No pilots needed. The valve chamber is directly exposed to the downstream pressure ...

DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: -29 °C - 175 °C

3 PIECES ATEX BALL VALVE WITH ISO MOUNTING PAD - FEMALE / FEMALE BSP - FULL BORE - LOCKABLE HANDLE - STAINLESS STEEL 316

DN: 15 mm - 150 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 175 °C

WAFER ATEX BALL VALVE WITH ISO MOUNTING PAD - FULL BORE - LOCKABLE HANDLE - STAINLESS STEEL 316

DN: 15 mm - 100 mm
Pressure: 16, 40 bar
Temperature: -29 °C - 175 °C

3 PIECES FULL BORE FLANGED END BALL VALVE - STAINLESS STEEL 316

DN: 10 mm - 600 mm

Pinch valves can be used in a variety of applications due to the wide range of materials used for the body and flanges/socket end covers on a pinch valve, such as aluminium, steel, stainless steel, plastic, e.g. POM or PVC, as well as a removable sleeve ...

DN: 10 mm - 250 mm
Pressure: 2 bar - 6 bar

... How do air operated pinch valves work? Supplying compressed air/fluid (minimum pressure difference 2 bar) into the casing of the air operated Pinch Valve compresses the sleeve, which is specially manufactured with high rebound elasticity. The body's ...

DN: 15 mm - 1,200 mm
Pressure: 3 bar - 40 bar

The sleeve of the manual and control Pinch Valve is controlled by a mechanism inside the casing and an actuator of your choice. The mechanism comprises one or two pinch bars arranged horizontally above and below the sleeve, and is guided at the side by ...

DN: 2.4 mm - 18 mm
Pressure: 70 bar - 206 bar

Lok type needle, ball and check valves with integral Lok tube ends for instrumentation systems. The range covers fine-control needle valves (including graphite-packed models for high-temperature service), compact ball valves for on/off isolation, and ...

DN: 0 mm - 10,000 mm
Pressure: 20,000 psi

... Product overview
The Hiflux ball-med-20k is a high-pressure ball valve engineered for industrial systems requiring reliable shut-off and accurate flow control. Suitable for both liquids and gases, it can be configured for manual or actuated ...

DN: 50 mm - 150 mm
Pressure: 0 psi - 60,000 psi

... Product overview
The normally closed air-operated valve is rated to 60,000 psi and designed for remote pneumatic actuation with spring-return fail-safe operation. Its 316 stainless steel body and UNF threaded connections make it suitable for ...

DN: 8 mm - 50 mm
Temperature: -20 °C - 200 °C

... Overview
Three-piece flanged ball valve designed for isolation and flow control in industrial piping systems. Manufactured by MARS Valve UK and engineered for fire-safe performance in accordance with API 607.

Technical specifications

• Product

DN: 6.35 mm - 50.8 mm
Pressure: 0 psi - 2,000 psi
Temperature: -20 °C - 180 °C

... Product Overview
The two-piece high-pressure ball valve is engineered for industrial service up to 2000 PSI. Body in CF8M stainless steel, available with PTFE or RTFE seats and a blow-out proof stem for secure operation.

Specifications
Design: ...

DN: 8 mm - 50 mm
Pressure: 0 psi - 1,000 psi
Temperature: -20 °C - 180 °C

... Product overview

• Two-piece ball valve designed for industrial on/off isolation and process applications.
• Two-piece bolted body enables maintenance and cartridge replacement without full pipeline removal.

• Process

DN: 0 mm - 10,000 mm
Pressure: 0 mbar - 1,000 mbar
Temperature: 150 °C

... Product name Heated pneumatic gate valves

Description Heated valves designed for chamber isolation in cluster systems. These are custom-developed pneumatic gate valves with thermalization to prevent condensation ...

DN: 0.5 in - 6 in
Pressure: 0 bar - 7 bar

Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure to a stable, lower downstream pressure. Unlike a ...

DN: 0.5 in - 6 in
Pressure: 0 bar - 100 bar

Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure to a stable, lower downstream pressure. Unlike a ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 10 bar

Hyperr Valves Pvt Ltd is a leading manufacturers, supplier and exporter of Pressure Reducing Valves. Our Pressure Reducing Valve is engineered to automatically reduce a high, fluctuating inlet pressure to a stable, lower downstream pressure. Unlike a ...

DN: 2 mm - 4 mm
Pressure: 0 bar - 1 bar
Temperature: -20 °C - 65 °C

... Product Overview
The WL-0838 medical pinch valve is a precision tubing pinch valve engineered for sterile, contamination-free handling of liquids in medical and laboratory equipment. The valve controls flow by compressing disposable flexible ...

DN: 0 mm - 10,000 mm
Pressure: 0 bar - 206.8 bar

... Pneumatic Diaphragm Valve HD Series — 316L Stainless Steel, High-Purity, High-Pressure for Laboratory Specialty Gases

Product Application and Purpose
The HD Series pneumatic diaphragm valve provides automated flow control and isolation ...

DN: 6 mm - 10 mm

... Product Overview
The Jewellok LD SERIES 316L VIM‑VAR stainless steel ultra‑high‑purity diaphragm valve provides fluid isolation for semiconductor gas distribution systems. Engineered for cleanroom use, it controls specialty, hazardous and corrosive ...

DN: 6, 8 mm

... Product overview
Pinch valves for tubing-based flow control, available with solenoid, pneumatic and proportional (stepper motor) actuation. Non-contact design isolates the media from the actuator, making these valves suitable for dosing, single-use ...

DN: 32 mm - 1,400 mm
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 180 °C

... knife gate valves experts, Flowrates will provide the finest solutions to your process. Our extensive range of knife gate valves enables our customers to solve problems on site trough our solutions. They are available in wafer design and can be constructed ...

DN: 100 mm - 1,000 mm
Pressure: 0.5 bar - 10 bar
Temperature: -40 °C - 800 °C

Flowrates‘ welded square section knife gate valves are specifically designed for the precise control of solids, powders, and bulk materials. Their unobstructed flow design ensures smooth and continuous discharge, reducing material build-up and premature ...

DN: 80 mm - 2,000 mm
Pressure: 10 bar - 250 bar
Temperature: -196 °C - 850 °C

... Unparalleled in terms of quality and adaptability, Flowrates model BVT01 is manufactured on-demand in order to reach your highest expectations. Metal/Metal tightness by direct contact without jamming the butterfly ring on the seal, also known as “eccentric” ...

DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 0 °C - 80 °C

... • Competitive ball valve to work in the water treatment sector • PTFE seats and joints in EPDM or FKM • Completely removable • Pressure -PN10 • Step ball T or step L • Available in PVC-U, PVC-C, PP thermoplastic materials • Connector socket connections, ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 100 °C

... • BV ball valves for chemical fluids • PVC-U, PVC-C (HT), PP or PVDF thermoplastic materials • EPDM, FKM gaskets, on request we have a FKM FB with glass fiber loading for very corrosive fluid applications • PTFE ball seats • Bushing that holds the ...

DN: 20 mm - 75 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C

... • Materials -PVC-U, PP • Together EPDM, FPM • PN10 • Step of the ball in T or L • Hand lever or with pneumatic actuator or with electric motor 230V / 24V • Gluing, soldering or socket connections, with DIN / ANSI flange, threaded BSP or NPT ...

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

Our flanged ball valves consist of a two-piece nodular cast iron body and are in fire-safe design. The floating ball inside the body, which is chambered on three sides, is adjusted with the handle. Optionally, the handle can be replaced by an electric ...