DN: 25 mm
Pressure: 20 bar
Temperature: -29 °C - 120 °C
Forged Steel Ball Valve Supplier: Forging Steel Ball Valves, 1 Inch, DN25, Class 150 LB, PN20, API 6D, ASME B16.10, API 598. Standard: API 6D. Face to face: ASME B16.10. Test and inspection: API 598.
China MED Valve Co., Ltd.
DN: 50 mm
Pressure: 100 bar
Temperature: -29 °C - 350 °C
2 Inch 600 LB WCB Ball Valve Supplier: Cast Steel ASTM A216 WCB Ball Valves, 2 Inch, DN50, Class 600 LB, PN100, T & I API 598. Body material: ASTM A216 WCB. Pressure: Class 600 LB. Face to face: ...
China MED Valve Co., Ltd.
DN: 450 mm
Pressure: 250 bar
Temperature: -29 °C - 120 °C
We Provide ASTM A350 LF2 Fully Welded Ball Valve Supplier: ASTM A350 LF2 Ball Valves, Fully Welded, 18 Inch, DN450, Class 1500 LB, PN250, API 6D, -29℃ to +120℃. Design Standard: API 6D. Body Material: ...
China MED Valve Co., Ltd.
DN: 15 mm - 250 mm
Pressure: 16 bar - 420 bar
Temperature: -101 °C - 350 °C
... unstable factor, the trunnion ball valve downstream seat will be pushed by un-normal pressure, and the release the un-normally pressure automatically, it doesn’t damage to the sealing of upstream seat. 9) The valve ...
wenzhou domos fluid equipment co.,ltd
DN: 50 mm - 1,000 mm
Temperature: -46 °C - 550 °C
... to corrosion protection. 5) Valve stem with bow friction coefficient of the bearing. 6) Valve seat spring is made of the X-750 INCONEL helical spring, to ensure the sealing performance of the valve ...
wenzhou domos fluid equipment co.,ltd
DN: 25 mm - 600 mm
Temperature: -46 °C - 250 °C
... with a small hand wheel can easily open and close the valve. 5) Wedge-shaped seal structure is provided by the mechanical force of the valve stem, ball and wedge against the seat and ...
wenzhou domos fluid equipment co.,ltd
DN: 50 mm - 2,000 mm
Pressure: 10, 16 bar
ANSI CLASS 125/150 • Connecting Flanged: JB/T74-90 GB9113 ANSIB16.10 • Construclion: GB/T12221. ASME B16.10 • Body Material: CF8/CF8M/Carbon steel • Lined Material: PTFE/EPDM/FEP/NBR/VITON etc • Designed standard: ...
DN: 2 in - 80 in
Pressure: 16, 25 bar
... Design Standard: JB/T8527 AP1609 GB/T12238 • Testing & Inspecting: GB/T13927 API 598 Installable Accessories Solenoid Valve Limit Switch Positioner Air-Filter Regulator
DN: 0.375 in - 3 in
Pressure: 0 bar - 14 bar
Temperature: -10 °C - 160 °C
Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, ...
RIEGLER & Co.KG
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
... leakproofness class – A acc. EN -12266 – 1) •compact settlement •environment-friendly •tests acc. EN – 12266 – 1 Stop valve, ends threaded, form straight 201 Grey cast iron EN-GJL-250 A Nominal diameter (mm) 050 Nominal ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 6 bar - 160 bar
Temperature: -60 °C - 550 °C
... drilled according to EN 1092-1 for body material F •face-to-face dimension according to EN 558 series 1 Bellow sealed stop valves, ends flanged, form straight 215 Grey cast iron EN-GJL-250 A Stem and disc connection ...
ZETKAMA Sp. z o.o.
DN: 15 mm - 300 mm
Pressure: 10, 25, 16, 6 bar
Temperature: -60 °C - 450 °C
... acc. EN – 12266 – 1 •flanges drilled according to EN 1092-2 •face-to-face dimension according to EN 558 series 8 Stop valves, ends flanged, angle form 216 Grey cast iron EN-GJL-250 A Stem and disc connection - ...
ZETKAMA Sp. z o.o.
Pressure: 6 bar - 10 bar
Temperature: 121, 135 °C
By means of the BioCheck sampling valve, samples can be taken easily and safely out of closed systems like vessels and pipings. When designing this sterile fitting, special emphasis was placed on the aseptic, but also ...
Overview CRANE® bronze angle valves have stood up to commercial and industrial services for more than a century.
Overview CRANE® bronze gate valves have stood up to commercial and industrial services for more than a century.
DN: 150 mm - 800 mm
Pressure: 0.5 bar
Temperature: 300 °C
COAL DUST DAMPER TYPE KSK Coal dust dampers are used in pipings of coal fired power plants between mills and burners. The purpose of these dampers is to shut-off individually the coal feeding line upstream the burner when the corresponding ...
DN: 150 mm - 800 mm
Pressure: 0.5 bar
Temperature: 300 °C
... medium due to robust seat sealing system Very short positioning times compared to simple shut-off valves Compact and cost-efficient solution – only one valve instead of two conventional ones OPERATION DETAILS
DN: 50 mm - 400 mm
Pressure: 6, 25 bar
Temperature: 200 °C
2D MIXING VALVES – TYPE ZDM Fully automated mixing valve for a selective gas quality control with simultaneous control of the flow rate. The application area of the ZDM mixing valve ...
TOP ENTRY BALL VALVE INTEC K211-STD-SE-TT Top Entry ball valve for maintenance-intensive and demanding media. INTEC Top Entry ball valve In contrast to Split Body Design, Top Entry ...
KLINGER-SCHÖNEBERG GmbH
DN: 150 mm
Pressure: 40 bar
... the ball valve INTEC K224-S-FS-DE/11/Q1500 is used in the application of dimethylamine (DMA - an organic chemical compound from the substance group of secondary aliphatic amines) at 4 bar and 110°C operating conditions. This ...
KLINGER-SCHÖNEBERG GmbH
DN: 15 mm - 50 mm
... ball valves with oval handwheel. Space-saving installation and increased safety against unintentional operation. For the purpose of space-saving installation and the increased safety requirements for ...
KLINGER-SCHÖNEBERG GmbH
CONTROL GAS VALVES VLM VLM valves are bypass and throttling devices suitable for use with previously treated, non-aggressive gaseous fluids. The main characteristics of these valves ...
DN: 300 mm - 600 mm
Pressure: 16, 19 bar
... special features of these valves are as follows: • Hermetic internal seal with shut valve • Low pressure losses • Can rotate butterfly through 360° so the seat is self-cleaning without ...
DN: 450 mm - 1,400 mm
Pressure: 16 bar
Temperature: -180 °C - 650 °C
Ball valves are often subjected to extreme conditions, especially when used in pipelines. To withstand even the highest loads, Böhmer ball valves are therefore welded through the entire cross-section. ...
DN: 3 mm - 1,400 mm
Pressure: 10 bar - 800 bar
Temperature: 180 °C - 650 °C
Split body ball valves up to a nominal diameter of 56 inch are a integral component part of the Böhmer product line. Ball valves of this design are well suited for extremely abrasive and corrosive fluids. Böhmer ...
DN: 100 mm
Multi-way ball valves from Böhmer, with three or four passages up to DN 100, are versatile in the truest sense of the word. Our valves are used for a variety of purposes. In shipping, for example, ...
DN: 0.5 in
Pressure: 60 bar
Temperature: -20 °C - 180 °C
Valve specially designed to connect the gauge to one end and the other end to the process, with special housing for the seal. It is not necessary to use any type of hemp or PTFE, etc, which can become introduced in the ...
DN: 0.5 in
Pressure: 60 bar
Temperature: -20 °C - 180 °C
Valve specially designed to connect the gauge to one end and the other end to the process, with special housing for the seal. It is not necessary to use any type of hemp or PTFE, etc, which can become introduced in the ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C
Brass gate valve Novo • - Non rising stem, solid wedge, screwed ends • - Used for water, petroleum • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: ...
DN: 15 mm - 100 mm
Pressure: 10 bar
Temperature: 120 °C
Brass gate valve Kuma • - Non rising stem, solid wedge, screwed ends • - Used for water • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: 10 bar ~ ...
DN: 1.813 in - 7.063 in
Pressure: 10,000, 15,000 psi
... next project, Cameron frac valves provide three times more uptime compared with other suppliers, minimizing NPT and related costs. Choose the gate valve that best suits your fracturing program Designed ...
CAMERON
DN: 6 mm - 75 mm
Temperature: -50 °C - 204 °C
... style valves in the Tee body configuration and in angle style bodies. Valves are available with either hand wheel or seal cap. These caps are exclusive to this series of valves ...
DN: 15 mm - 250 mm
Pressure: 23.8 bar - 40 bar
Temperature: -10 °C - 400 °C
... on request), manual handwheel control, flanged connections according to EN1092-1 PN 40 with prominence. Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow ...
Mival
DN: 50 mm - 1,200 mm
Pressure: 10 bar
Temperature: -10 °C - 120 °C
... Surface drainage Suspended solids treatment Tank cleaning Waste water Waste water transport Water Design Knife gate valve to DIN/EN with wafer-type single-piece or two-piece body made of grey cast iron, bi-directional, ...
DN: 0.75, 0.625 in
Pressure: 34.5, 31 bar
Temperature: -28, -18, -8 °C
... pressure. The Parer LAC pressure control valves have a brass body with copper connections. These valves are nonadjustable. They perform the function of limiting flow of refrigerant from the condenser ...
DN: 1 in - 30 in
Temperature: -198 °C - 593 °C
The Fisher easy-e cryogenic valve is a globe style, single-port, valve featuring stainless steel construction materials and fabricated extension bonnets. These cryogenic valves are designed ...
FISHER REGULATORS
Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 100 °C
• Made of stainless steel with large free cross section and sealed gate blade • For installation between two flanges in gravity pipes at up to 1.5 barg (FUS) and 3.5 barg (FUH) • Low construction height - Application Suitable ...
Pressure: 16 bar
Temperature: 220 °C
... at a stable pressure. Even if the steam flow (load) to the equipment or the primary pressure at the pressure reducing valve changes, the Shock-absorbing Spherical piston (SAS) supplies stabilizes the steam pressure ...
TLV Euro Engineering
DN: 50 mm - 1,000 mm
Pressure: 10 bar
Temperature: -40 °C - 200 °C
Features •Double action, maintenance-free and self-adjusting top and bottom stem sealing - wide variety of discs / body combinations possible •Durable due to optimum material combination PTFE lining and PFA disc •Maximum reliability ...
Richter Chemie Technik
DN: 50 mm - 600 mm
Pressure: 1, 1.6 MPa
Temperature: 425, 80 °C
Syrup, Pulp, Sewage, Coal SIurry Ash Slag Water Mixture Material of Major Parts and Components Body and cover -Stainless Steel, -carbon steel Flashboard -Stainless steel, -carbon steel Stem -Stainless steel - - Sealing ...
DN: 2.5 in - 24 in
Pressure: 100 psi - 740 psi
Temperature: 0 °F - 400 °F
... information. Choose NIBCO® high performance butterfly valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® high performance ...
NIBCO
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C
Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in sea water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and ...
VAG-Group
Please specify:
Help us improve:
remaining