DN: 40 mm - 1,800 mm
Temperature: -20 °C - 204 °C
... -7/7,4-6-2/5.11 Information provided is not contractual, data may be changed without notice. All rights reserved by Value Valves Co., Ltd. ...
Value Valves Co., Ltd.
DN: 0.5 in - 12 in
Pressure: 16 bar
... ASTM-A351-CF8M, ASTM-A351-CF8, ASTM-A216-WCB Rating ANSI 150L/ JIS 10K, Face to face ANSI B16.10/ JIS B2002, End flange dimension ANSI B16.5/ JIS B2239, Design ANSI B16.34, Testing API 598 Rating ANSI 300Lbs/ JIS 20K/ DIN PN16 ...
BOLA-TEK Mfg.Co
Temperature: 425, 325, 530, 200 °C
... •Z40H—150Lb Temp.：≤425℃ Supply for ：Steam, water ,oil etc non corrosion medium •Z41H 1.6C-16 Temp.：≤325℃ Supply for ：Steam, water ,oil etc non corrosion medium Z41Y •Z41Y1.61-161 Temp.：≤530℃ Supply for ：Steam, water ,oil etc non corrosion ...
Jiangsu Zhengxuan Petroleum Machinery Co., Ltd.
DN: 15 mm - 50 mm
Pressure: 20, 50, 100 bar
Temperature: -29 °C - 425 °C
... high tightness (leakprooftightness class A according to EN – 12266 – 1) environment friendly tests according to API 598 or EN 12266-1 installation length according to DIN 3202 for classes according to ANSI B16.10 according to EN ...
ZETKAMA Sp. z o.o.
DN: 150 mm - 800 mm
Pressure: 0.5 bar
Temperature: 300 °C
... COAL DUST DAMPER TYPE KSK Coal dust dampers are used in pipings of coal fired power plants between mills and burners. The purpose of these dampers is to shut-off individually the coal feeding line upstream the burner when the corresponding mill is out ...
Kühme Armaturen GmbH
... Flanged diaphragm valve PPH, PVDF or UPVC from 3'' to 10" EPDM or PTFE diaphragm ...
DN: 10 mm - 150 mm
Pressure: 160 bar - 250 bar
Temperature: 350 °C
... – shut-off globe valve with bellows (A10) and regulating globe valve with bellows (A11 rough – regulation) – forged body (lifetime up to 60 years) – non-cobalt overlay – threaded yoke – multi-layer bellows with long ...
ARAKO spol. s r.o
... JIELIN Hydraulic gate valves are strictly designed and manufactured according to API 6A, the actuators are designed with safety and suitable for all kind of gate valves. Metal seal between the body and bonnet. Backseat ...
Jianhu Jielin Petrochemical Machinery Co., Ltd.
DN: 80 mm - 600 mm
Temperature: -46 °C - 593 °C
... Lock Hopper Ball Valve Product type On/off valve Valve Type Lock Hopper Ball Valve Model Q*49H Size NPS 3～NPS 24 Operating temp. -46℃～593℃ Seal type Metal ...
Beijing Valve General Factory Co., Ltd
... . AFC Monel valves serve many different applications in these industries: • Chemical • Oil & Gas • Pharmaceutical • Nuclear Power • Marine • Petrochemical • Oil Refining • Sea Water Characteristics 1. AFC butterfly valve ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
DN: 15 mm - 600 mm
Temperature: -50 °C - 600 °C
... – Butt-welding Ends Actuation: can operate with lever, gear box, pneumatic or electric actuator with handwheel for emergencies Medium: The valve is suitable for several media including water, steam, oil, gas, petrol ...
WENZHOU AEA VALVE CO., LTD.
DN: 50 mm - 600 mm
Pressure: 240 psi
Temperature: 70 °C
... switches •Space heater, space heater's thermal swich •Mechanical connection (lange F10, IS05210 •Manual control. •Gâte valve design standards: DIN3352, (ace to (ace dimensions DIN3302 F4, EN558 1 15/IS05752 ...
BLUCAST
DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -35 °C - 200 °C
... 266ITT is our butterfly valve with a wafer type connection, seat and ptfe disc . The ptfe seat and disc give the valve great resistance to corrosion . The range is from DN 40 to DN 300 , replacing the sleeve with a reducing ...
KTN
DN: 50 mm - 400 mm
Pressure: 10, 7, 8, 5, 6 bar
... Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, ...
Watergates GmbH & Co. KG
DN: 50 mm - 1,400 mm
Pressure: 2 bar - 10 bar
Temperature: 120 °C
... double-sided sealing with continuous valve plate and smooth dead zone-free flow ensures unobstructed closing with densities <5% and media containing solids also available with various seal types and surface treating of the wearing ...
Lohse GmbH, Maschinenbau
DN: 50 mm - 200 mm
Pressure: 10 bar
... BUTTERFLY VALVES AISI 316 BODY, DISC AND SHAFT,FLANGES PN10 AND ANSI 150 Butterfly valves type Wafer : - AISI316 body, disc and shaft - PTFE body seat over EPDM backseat - Assembly between flanges PN10 and ANSI150 - ...
TUNING Fluid Solutions SARL
DN: 80, 100 mm
... Fully welded ball valve, standard model, regularly available in the sizes up to DN 80 (3”) full bore or to DN 100 (4”x3”) reduced bore (bigger diameters on request), PN 10÷50 or ANSI 150-300, in carbon steel with floating ball in stainless ...
Negri Fratelli srl
DN: 250 mm - 1,000 mm
... Use : For general applications, fluids, gas and water treatment. Body shape : Double flanged Type : 2314 Tightness: Elastomer (EPDM/NBR/VITON/HYPALON/NEOPRENE/SILICONE) Face to Face : EN 558-1/20 Max working pressure : According to configurations Type ...
DN: 0.5 in
Pressure: 60 bar
Temperature: -20 °C - 180 °C
Valve specially designed to connect the gauge to one end and the other end to the process, with special housing for the seal. It is not necessary to use any type of hemp or PTFE, etc, which can become introduced in the interior, blocking ...
... Heavy duty slide valve made of cast iron for powders or granular products. This equipment ensures high seal level as for the external environment and can be supplied in three sizes with manual wheel or with pneumatic drive. ...
DN: 15, 20 mm
Pressure: 51 bar
Temperature: 425 °C
... accompanied by a Isolation valve for isolation to maintain/repair the trap and a Bypass valve to let out the condensate uninterrupted while the trap is being maintained. This was available in the form of a Trap Module, ...
DN: 50 mm - 300 mm
Pressure: 10 bar
... Replaceable top packing gland enables sealing replacement without disassembly of the valve The valve is self-cleaning when opening the valve, an additional scraper is available for extra protection of ...
DN: 0.5 in - 24 in
... Gate Valves serve as efficient stop valves with flow in either direction. They are commonly used when minimum pressure drop is important. Throttling is not recommended because partially open gate valve ...
... pipeline applications. Gate valves are linear motion devices used open and close the flow of the fluid (shutoff valve). Gate valves cannot be used for throttling applications, i.e. to regulate the flow ...
TECNOGROUP
DN: 89 mm - 300 mm
Pressure: 300 psi
Temperature: -10 °C - 160 °C
... BS EN1092-2 PN16 or GB/9113.1 4.Epoxy resin coating both inside & outside the body 5.It could also be operated by the handwheel ...
Nuevas líneas de extincion
... that has clumped together in storage, dust formation, ensuring exact/calibrated quantities etc. Product range ■Flat slide valves ■Chutes ■2-way switches Properties/variants Applications For flowing or pourable bulk materials Configurations ...
DN: 15 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C
... Material sealing element (in contact with medium): EPDM | FPM reliable and economical good control characteristics high kv value visual position indicator ...
DN: 0.5 in - 6 in
Pressure: 16 bar
Temperature: -46 °C - 400 °C
... series is a line of ball valves manufactured by Penta. It offers an efficient solution for high-temperature fluid handling with reliability and capability. The ball valves are also produced with quality, based on Alfa ...
Penta Srl
DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C
... protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel free from dead spots Open ...
Kemper Olpe GmbH
DN: 25 mm - 150 mm
Pressure: 16, 10 bar
Temperature: 300 °C
... •The rising opening system breaks the sediment or crystallized layer on the bottom of the tank. •Mechanized in high alloy stainless steel. Specifications •Quality: ASTM A.351 Gr. CF8M (316). •Closing: Metal - Metal. •Control: Hand by wheel. •Stem ...
DN: 80 mm - 125 mm
Pressure: 16 bar
... STANDARDS OF MANUFACTURE EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 1092-2 (ISO 7005-2) DRILLING FLANGES MATERIALS BODY FIG.11-12-13 – CAST IRON EN GJL-250 EN 1561 FIG.11S-12S-13S ...
ACMO S.p.A.
DN: 15 mm - 300 mm
Pressure: 16 bar - 250 bar
Temperature: -50 °C - 130 °C
... more quite than a traditional globe valve. N20 valves are available with an open window cage (for plug balancing purposes only), single, double or a triple cage (for low noise purposes only) Valve body Type: ...
DN: 0.25, 0.375, 0.5, 0.75 in
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 130 °C
... made out of AISI 316 Stainless Steel and a needle made out of X 10 Cr Ni S 1809. It has a PTFE antiextrusion ring and a handwheel made out of GD Al SI 12. It also has a working temperature range of -20ºC to +130ºC. ...
Dicsa
DN: 15 mm - 900 mm
Pressure: 1,600,000 Pa - 42,000,000 Pa
Temperature: -196 °C - 380 °C
... Ball Valve Body materials: carbon steel, stainless steel, alloy steel WCB, LCB, CF3, CF3M, CF8, CF8M, MONEL, and more. Valve Ball type: floating ball, trunnion mounted ball. Valve Manufacturing standards: ...
Pipe Valve Flange Factory Landee
DN: 2 in - 12 in
Pressure: 150 psi
... JOINT END: FLANGE (ANSI /DIN / JIS/ CNS) WORKING PRESSURE: 150PSI Key words: CPVC turbine butterfly valve ...
DN: 15 mm - 800 mm
Pressure: 20 bar - 420 bar
Temperature: -50 °C - 200 °C
... Side Entry Valves suitable for Oil & Gas production, processing, transportation, distribution, chemical and petrochemical refining including system isolation, pressure level and flow measurement, instrument drain, chemical injection ...
DN: 50 mm - 300 mm
Pressure: 20 bar
Temperature: -29 °C - 425 °C
... steel body & bonnet -TRIM 8 - A410 + stellite Gr. 6 seat - Bolted bonnet & gland pack - Rising stem & non rising handwheel for gate & globe valves - PS: 20 bar (ANSI 150), 50 bar (ANSI 300) - TS: -29°C/+425°C. SKU MXT-1850143 Body ...
MerxTrade BV
DN: 1.25 in - 24 in
Temperature: -10 °C - 110 °C
Ductile Iron Wafer butterfly valveDiameters from DN032 - 1¼" to DN600 - 24"For EN1092 PN16 flanges (also PN10 for DN≤150)Lengths according to EN558-1 series 20 (ex DIN3202 K1)Design according to EN593Testing according to EN12266-1Epoxy coating (min. 150 ...
VIR
DN: 0.5 in - 40 in
... Cryogenic Cast Steel Ball Valve Supplier: Cast Carbon, Stainless Steel Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. Cryogenic ball valves are available in types of ...
China MED Valve Co., Ltd.
DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 196 °C
... Nitrogen - Oxygen - Argon MATERIALS: Body: AISI 304 L/A 351 CF3 Stem-Extention: AISI 304 / Brass Disc: Brass or AISI 304 Disc-Gasket: PTFE ...
the best suppliers